gto 52 2 used for sale

Heidenhain RON 255 C-18000 ID.-No. 358 697-70 Incl. test report from Heidenhain Replacement part not required

Siemens combined X-ray recording and fluoroscopy device Iconos R 200 with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0,6/1,0 Digital image processing Fluorospot Compact Sirecon 33-4 HDR image intensifier • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactur ...

Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes

Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm -Height: 500 mm -Gas type: Propane -Quantity: 1 available Price: per piece -Weight: 16 kg

Sell a Hilti DAG 230-D. Sold incl. the diamond disc. The machine is in good condition, functional and tested.

Sell a Budmasz WEB 200 concrete and screed cutter. Working width: 195mm Drive Type: Electricity Suction possible. The machine is in good condition, functional and tested.

Work table bakery - confectionery table with granite worktop open at the bottom with intermediate shelf Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion

Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Frequency converter, frequency converter, drive converter, controller, variable speed drive, power supply -AC power source: ZAF 0.5/270/2 -Line In: 90-264 VAC 47-63 Hz -Output: 500 VA Max -Dimensions: 560/430/H95 mm -Weight: 18.6 kg

Microcut Challenger MCV-2418 - CNC Machining Center - Fagor 0i-mc CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Btl9ijraac - Year of construction 2005 Specification - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverses: 24 m/min - Speed working spindle: 8000 rpm - Tool holder: BT40 - Table size : 762 x 363 mm - Table load max.: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm -Panel thickness: 69 mm -Weight: 1396 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 330 mm -Weight: 0.3 kg/piece

Control: SIEMENS 840D Max.turning length: 1185 mm Max swing diameter over bed/slide: 640 mm/550mm Workpiece diametr: 400/250 mm Material passage through the spindle: 65 mm Max.diameter of the material for barloader: 65 mm Rotation speed(max.) 5000 rpm Sp

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 170 mm -Dimensions: Ø 250/38 mm -Weight: 9 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 248 mm -Transport roller width: 610 mm -Hole: Ø 30 x 60 mm, Ø 25 x 75 mm -Dimensions: Ø 248 x 840 mm -Weight: 27 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Version: heavy -Groove: 24 mm -Slot spacing: 80 mm Quantity: 1 piece -Dimensions: 360/285/H245 mm -Weight: 70 kg

number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VMI 2400L high shear mixing vessel 2012, Stainless, 2400l jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be pre-selected via scale Manual and automatic bending mode possible Weight: approx. 650 kg

cross-section width:: Schläuche max. 11 mm cross-section heigth:: 11 mm feed:: 0,5 - 100.000 mm Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No docum ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 250 mm -Cone diameter: 140 mm -Weight: 13 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 260 mm -Cone diameter: 106 mm -Weight: 11 kg

Gallus EM 280, 2000(4) Web width: 280 mm Transaction Corona 4 x Screen Printing Stations 4 x IST UV dryer (2009 new) 4 x water-cooled rollers 1 x Hot Foil Device 1 x Rotary Punch Matrix Rewinder Takeup Magnet yZlinder Bring them

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 225 mm -Feed flange: M55x4 -Tip: 57 mm -Passage: Ø 50 mm -one sentence: hard-hitting jaws -Weight: 20 kg

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Short taper holder: Short taper 6 Ø 105 -Passage: Ø 77 mm -one set: hard interchangeable jaws -Weight: 28 kg

Ultraviolet Document Coater Coating speed 11 - 20 m/min. Max. speed 4440 sheets / hour Paper thickness/weight 120 - 350 g/m2 Min. sheet size 216 × 270 mm (A4) Max. sheet size 508 × 710 mm (B2) Automatic setting for coating rollers from 120 up to 350 g/m2. Ait fixing for low weight paper, touch control panel for the operator. Automatic cleaning system.

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Hole size: Ø 216 mm -Recess recording: mm -Bolt circle: mm -Through hole: 50 mm -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Camozzi, pneumatic cylinder type 61M2PO40A0250 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 515/60/H60 mm -Total weight: 2.5 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally elastic coupling -Claw coupling: Torsionally flexible claw coupling -Bore: Ø 29 mm -Number: 3x coupling available -Price: per piece -Dimensions: Ø 225 x 180 mm -Weight: 26.4 kg/pc.

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...

Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...

USED TETRA PAK TBA 19 250ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-188 Category Tetra Pak TBA 19 1-TBA 19 250ml Slim Filling Machine, Year of manufactitng 1999, Version 10v, Speed 7500 PPH 2-Tetra Pak Straw Applicator TSA 46, Year of manufacturing 1997 3-Tetra Pak Cardboard Packer TCBP 70 4-Tetra Easy Ride 5-Conveyors and Paper trolly Condition: Still on production and Tetra pak maintained.

USED TETRA PAK TBA 19 200ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-189 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 200ml Slim Filling Machine, Version 10v, Year of manufacturing 1998, Speed 7500 PPH Tetra Pak Straw Applicator, TSA 21 Tetra Pak Packer, TCBP 70 Conveyors and Paper Trolly Condition: Good

Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Holes: Ø 22 mm / Ø 29 mm -Quantity: 1 piece available -Price: per piece -Dimensions: Ø 258 x 200 mm -Weight: 37.4 kg/piece

Roller bearings, ball bearings, spherical bearings, bearings, rolling bearings, spherical bearings, spherical roller bearings, cylindrical roller bearings -Spherical roller bearings: Roller bearings with lubrication groove -Type: 22322 -Bore: Ø 110 mm -Outer diameter: 240 mm -Width: 80 mm -Weight: 17 kg

Offer 23380 Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drilling spindle speeds in gear stages 95 - 2000 rpm - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height adjustable 340 x 320 mm - Table can be tilted left + right -Max. Distance table – drilling spindle 500 mm - Max distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm -Lighting - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Inv. Num. : 7253 Type: MSF 9001.25Lr T500 Producer: Microstep Created: 2015, GO 2022 Parameters: Laser power: 10 kW Work table length: 9000 mm Work table width: 2500 mm Maximum sheet thickness when cutting (stainless steel): 25 mm Source: nLight CORONA-CFX-10000 Positioning speed: 130 m/min Laser head: Thermacut EX-TRABEAM-Pro-360 Machine height: 2570 mm Machine length: 23000 mm Machine width: 6000 mm Equipment: Technical Documentation Point Laser Sight Camera in the head Protective glass against lens contamination Remote support Adaptive Cutting Automatic alignment of sheet rotation LED Control Panel Automatic nozzle cleaning Calibration station Pallet Table Changer 2 Tables Intake segments under the grate 1x socket Automatic chip conveyor Automatic suction 2x Asper Licenses

GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours

B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features:

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Used Tecan Freedome evo 200 pipetting robot with TE-MO 3/5 Pictures will follow