gto 52 2 used for sale

8 Sulzer TPS Terry Looms 360cm Year 2000 8 Colours 16 Frames 20 Levers 1.25 Beams 1 Cloth roll 2 Weft feeders on the loom (total 29 pcs for 8 looms) Staubli dobby 2668 Heald wires and droppers 5000 Total number of beams are 20 for 8 machines

cutting diameter: 280 mm saw band length: 4200 mm cutting width: 280 x 280 mm dimensions of saw-band: 4200 x 34 x 1,1 mm cutting speed: 18 - 115 m/min multiple feeding: 0 - 6000 mm power capacity: 3,0 kW coolant: voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Drive: 0.3 KW -Speed: 2800 rpm -Connection input: Ø 280 mm -Dimensions: Ø 280 x 280 mm -Weight: 12 kg

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 20 kV/100 V 120/1 A 4.156-0-4.156 MW -Dimensions: 85/45/H113 mm -Weight: 0.4 kg

Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bokö, live centering tip -Type: 2005 -Recording: MK5 -Dimensions: Ø 85 x 252 mm -Weight: 4 kg

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 16 mm -Takes: square 12 x 12 mm/M10 x 1,5 -Dimensions: Ø 14 x 2405 mm -Weight: 2,7 kg

Offer 22569 Specifications: - Max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Motorized stroke upper beam - Max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Manual bending process is supported by eccentric weight - Connection 400 V - Space requirement approx. W 3700 x H 1250 x D 450 mm - Weight approx. 1700 kg

Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 16 mm -Takes: square 14 x 14 mm/M12 x 1,75 -Dimensions: Ø 16 x 2375 mm -Weight: 3,5 kg

Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 18 mm -Takes: square 16 x 16 mm/M10 x 1.5 -Dimensions: Ø 18 x 2365 mm -Weight: 4,5 kg

Stop shaft for Peddinghaus, Mubea, profile steel scissors, stop rail, stop rail -Stop: shaft Ø 20 mm -Takes: square 16 x 16 mm/M10 x 1.5 -Dimensions: Ø 20 x 2400 mm -Weight: 5.6 kg

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Hydraulic filter, filter element -Manufacturer: Hydac, filter element Betamicron OVP -Type: 2600 R 005 BN4HC -Dimension: Ø 143 x 920 mm -Weight: 6.4 kg

Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 220 mm -Inside: Ø 100 mm -Dimension: Ø 220 x 70 mm -Weight: 6.1 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 76 mm -Take: short taper 6, cone Ø 105 mm -Dimension: Ø 210 x 65 mm -Weight: 3.5 kg

Electric motor, three-phase motor -Manufacturer: EP REL, electric motor type eAL 100L2B-4 -Power: 2.2 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Construction: B5 -Number: 2x motors available -Price per piece -Dimensions: 370/252 / H250 mm -Weight: 29 kg / piece

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft material, shaft, steel shaft, hardened shaft -Manufacturer: unknown -Diameter: 30 mm -Length: 220 mm -Thread: M10 x 22 mm deep on both sides -Number: 2 x waves available -Price: per piece -Weight: 1.2 kg/piece

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

Power resistor, wire potentiometer, resistor, braking resistor -Frizlen power resistor: GWADU 216x120-20 -Resistance: 300 W 20 ohms -Dimensions: 240/140/60 mm -Weight: 3 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204

Hydraulic filter changer: 200 mm. With pressure transducer.

material width: 250 mm material thickness: 2 mm no. of straightening rolls: 19 weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnet coil, electromagnet, pull magnet -Ritz: type UIRK 290 -Connection: 0.72/3/- kV 50 Hz 1 VA -Price: per piece -Number: 3x available -Dimension: Ø 355 x 30 mm -Weight: 3.1 kg

Tool holder, milling holder, milling tool, cutter head, face milling cutter, shell end mill, Side milling cutter -Manufacturer: Wodex, side milling cutter -Adjustment: SK50 -Size: Ø 200 x 12 mm -Dimensions: Ø 200 x 220 mm -Weight: 6.3 kg

Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Phoenix Contact, Fiber optic cable -Type: I-VH11Y 2K200/230 10A17 8B20 HCS Rugged -Length: 83 m -Price: complete -Dimensions roll: Ø 500 x 410 mm -Weight: 10 kg

Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.

• Hydraulic lifter • S/S-style • Load 120 kg • Lifting height appr. 1,20 m • Drum holder Ø 400 mm • Rotatable, tiltable upwards • Length of arm 820 mm • Mobile • Protection class EEx eII CT4 • Electrical connection 400V/50Hz/0,75kW

Key data: 380 mm, 280 mm, 130 mm

Vest bezel range 200-380mm incl pins with rollers

Used stainless steel ribbon mixer. Capacity 250 liters. The mixer with a double ribbon agitator.

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available -Price per piece -Weight: 1.5 kg / pc.

Electric motor, three-phase motor -Manufacturer: MEZ, electric motor type 2AP90S-4 -Power: 1.1 kW -Speed: 1400 rpm -Shaft: Ø 24 x 50 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 300/220/H173 mm -Weight: 13.7 kg

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Weight: 170 kg

• Stirring volume max. 200 l • Stirring speeds 100-1,000 rpm • Mounting plate 180 x 180 mm • Effective power 80 W • Max. Shaft torque 50 Ncm • Control unit Cimarec Telemodul 40 M (stirring start, stirring time, speed) • Mounted on a mobile stainless steel frame with inclined mounting plate with counter support (format part) for mounting a vessel with Ø 235 mm • Drive 230V/50-60Hz

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: single-acting -Stroke: 295 mm -Piston rod: Ø 40 mm -Dimensions of mount/rollers: see photos -Total length when retracted: 530 mm -Dimensions: 530/235/H130 mm -Weight: 26 kg

Marine diesel piston, diesel engine piston -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 210 mm -Piston rod: Ø 40 mm -Mounting holes: Ø35 x 25 mm -Cylinder: outer Ø 110 mm -Number: 4 cylinders available -Price: per piece -Dimensions: 640/130/H110 mm -Weight: 22 kg/pc.

Brand: C&U Group Shanghai Bearing Co Ltd Model: TM6307/41RS Year of construction: Unused Weight (Kg) approx. 6790 net Number of items in stock 17350 ( approx ) Made in China Comments Contact us for min. quantity Terms of sale Contact us for min. quantity

Used machine for crispy cakes, pressed from roller Saixin 250. Set mixer + roller machine + electric oven belt width 250 mm.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Stork-Packo, conveyor belt with high load capacity -Type: SAL-HE 10 -Metal belts: belt width 2 x 150 mm -Conveying length: approx. 2200 mm -Drive: without drive motor -Dimensions: 2350/460 / H210 mm -Weight: 127 kg

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: Ø approx. 217 x 18 mm -Recess: Ø 90 mm -Degree display -Dimensions: 275/340/H90 mm -Weight: 20.6 kg

number of controlled axis: 6 workpiece weight: 210 kg throat: 2697 mm total power requirement: kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coma Freezer Cell Freezer Cell Freezer Room Internal dimensions: 210cm wide 285cm Depth 203cm high Dimensions: 250cm wide 340cm deep 283cm tall