128,402 used machines on RESALE, but how to find them? Machine Search
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SPH-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-B-SP-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-B-SP-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) Machine data Parameter Value Unit / Notes Max. press force 4500 kN Stroke rate (continuous) min. 15 strokes/min Max. stroke rate (tool designed for) 75 strokes/min Ram stroke 3 – 200 mm Ram adjustment 120 mm Installation height (min.) 600 mm Max. installation height 670 mm Dimensions of press table Press table length 2000 mm Press table width 1250 mm T-slots (press table) DIN 650 – 28 H12 Number of T-slots (table) 11 pcs Distance between T-slots 150 mm Dimensions of press ram Slide length 2000 mm Slide width 1200 mm T-slots (slide) DIN 650 – 22 H12 Number of T-slots (slide) 13 pcs Distance between T-slots 150 mm Press frame opening Side opening 900 mm Front opening 2200 mm Tool clamping Tool clamping height (upper tool) 80 mm Tool clamping h ...
Incl. Coolant Heater and Battery Charger; Gross weight [kg]: 3177; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Requesting a EUR.1 Certificate is possible for this Generator set., , Warranty:, 1 year for continuous use, 2 years for standby use; Water Tank Volume [l]: 995
3 pieces Teflon knife for slicer TREIF type PUMA CE 700 EB Article number Treif : 244755 = 83581 - ID 16391, 12153,11695 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl
ARISA S-2-400-260-FD mechanical press was built in 2000 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables precise punching and stamping of metal parts. All these machining processes are performed with a high press force of up to 400 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The ARISA S-2-400-260-FD features a robust, stress-relieved gantry design with an open side wall. This design maintains high rigidity, stable parameters and repeatability during even the most intensive operations with high press force. It is distinguished by the use of two connecting rods, a flywheel drive and an eccentric pinion gear. This solution ensures even torque transmission and smooth and pr ...
Electric coupling for filling machine VEMAG type HK 23/4 -Kind. Item No.: 081-011-201 - 081011201 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Engine: 4006-23TAG3A; Accessories: Product features:
280T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 280 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guided tour: 4 column guides Clear width between the uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 900 mm Total height approx.: 3, ...
The machine is in good technical condition, after prior agreement it is possible to test it. Max swing diameter 660 mm Max turned diameter 660 mm Main spindle: Speed range 35-5000 Main drive power 22/15 kW Max torque 349Nm Spindle bore 76 mm Chuck diameter 210 mm Indexing (C axis) 0.0001 Second spindle: Speed range 35-5000 rpm Power (10 min/constant) 18.5/15 kW Max torque 326 Nm Chuck diameter 210 mm Indexing (C axis) 0.0001 Coolant tank capacity 300 l Machine power 66 kVA Operating voltage 400 V / 50Hz Air pressure 5 bar, 500 l/min Control system MAZATROL Fusion 640 MT Flush cooling: Pump capacity 20 l / min Pump pressure 5 bar Accessories Technical documentation, chip conveyor with cooling, magazine for 20 tools B axis (positioned in 0.001, C axis, Y axis Indexing of the rotation position of the second spindle, Synchronization of the main and second spindles Tool pre-settin ...
Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-B-SPH-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens/weishaupt, actuator for air dampers and gas dampers -Type: SQM45.291A9WH -Dimensions: 135/130/85 mm -Weight: 1.0 kg
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg
Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-B-SPH-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Machine vise, sturdy vise, drill vise -Jaw width: 260 mm -Back height: 50 mm -Clamping depth: 265 mm -Dimensions: 580/260/H135 mm -Weight: 56 kg
Machine vise, sturdy vise, drill vise -Jaw width: 250 mm -Back height: 50 mm -Clamping depth: 270 mm -Dimensions: 640/440/H220 mm -Weight: 79 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-C1-SP-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Orsta, pneumatic cylinder A125-32x320 TGL 20744 -Stroke: 230 mm -Piston rod: Ø 32 mm, M20 x 1.5 -Dimensions: 610/155/H155 mm -Weight: 15.7 kg
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-C1-SP-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston rod: Ø 38 mm -Dimensions: 168/168/575 mm -Weight: 18.4 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg
Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-C1-SPH-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg
Tailstock, counter bearing for dividing head, dividing head -Peak height: 255 mm -Recording: MK4 -Dimensions: see drawing in the images -Dimensions: 600/220/H410 mm -Weight: 84 kg
Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-C1-SPH-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Wheel mounting: Dimensions see pictures -Bolt circle: Ø 270 mm M12 -Dimensions: 700/330/H285 mm -Weight: 69 kg
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece
Repair service Reparatur Service Part: Axle amplifier type MR-S1-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Used centrifuge made by Alfa Laval type BRPX 213 SGP-34. The machine has a control cabinet with a touch panel, a set of keys and technical documentation.
Plug, connector, cable socket -Manufacturer: Siemens, connector 11 pieces -Type: AGA67/GDML 2016 GB 1 -Price: complete -Dimensions: 50/30/35 mm -Weight: 0.1 kg/piece
Electric chain hoist, crane, indoor crane, assembly crane, electric lift, chain bag chain hoist -Chain bag: for crane chain hoist -Dimensions: 720/300/280 mm -Weight: 6.3 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Coolant pump: from milling machine Stankoimport 6P/2 -Type: X14-22M -Performance: see photo nameplate -Bolt circle: Ø 160 x 9 mm -Dimensions: Ø 180 x 380 mm -Weight: 8.5 kg
Repair service Reparatur Service Part: Axle amplifier type MR-S11-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,340 mm Number of fields / row of shelves: 01 pcs. á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 04x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 04x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 04x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm N ...
Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.
Repair service Reparatur Service Part: Axle amplifier type MR-S12-200-E Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Technical data for the shelving rack: Shelving system: Dexion Type: HI280 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,630 mm Number of fields / row of shelves: 02 pcs á 1,290 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x Shelf stand, used Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm incl. transverse and diagonal struts The stands are pre-assembled 1,200 mm high 610 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pcs.: approx. 4,78 kg max. load per floor at evenly distributed load: 120 kg 06x Compensating plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized 08x Rack trusses, used Total length: 1,275 mm Z-profile: 50 x 25 mm Nu ...
4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Clamping force: max. 90 kN -Equipment: Short cone 6 (106 mm) -Mouth size: Ø 210 mm -Weight: 22 kg
maximum number of results exceeded
please refine your search
