gto 52 2 used for sale

DUE TO NEW ENGINE THIS VERY WELL FUTILIZED DEUTZ DRIVE ENGINE FOR SALE

MIG/MAG hose package for robot -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

PLC control, electronic module, noise filter -Block Part.No.: B 0901031 -UR: 520 V 50-60 Hz 30 Aac -Dimensions: 270/70/H95 mm -Weight: 1.7 kg

New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 2 pieces -Dimensions: 85/56/H45 mm -Weight: 0.35 kg/piece

New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 233/65/H65 mm -Weight: 2.35 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Thread intake: M16 -Air inlet and outlet: adjustable -Price: per piece -Number: 2 pieces -Dimensions: 405/75/H75 mm -Weight: 3.6 kg/piece

We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

Control amplifier, servo motor control -Manufacturer: Indramat -Type: TRM3-W23-E0/523 -Module: TSS8/532 -Number: 1x controls available -Price: per piece -Dimensions: 305/145/H310 mm -Weight: 7.1 kg/piece

Completely overhauled fuel injector, even used ones we have all in stock

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

Sheeter Dough Sheeter Model: SM 520 F sophisticated technology ... already proven many times over! Easy manual operation for all doughs for rolling out and touring Tables can be folded up Tables with plastic straps Rolling out thickness from 1 to 30 mm Sheeting width up to 520 mm Conveyor belt length: 2x 980 mm Stationary machine mobile, dough roll Connection 400V, 0.55 kW, 16A-CEE plug Dimensions: 1030 mm D x 1200 mm W (resting position) 2610 mm W (working position) New machine with 24 months warranty + service package Option: Train Felt Tape Maintenance contract

Sheeter Dough Sheeter Model: SM 520 S sophisticated technology ... already proven many times over! Easy manual operation for all doughs for rolling out and touring Tables can be folded up Tables with plastic straps each 670 mm Rolling out thickness from 1 to 30 mm Sheeting width up to 520 mm Table sheeter DGUV V3 tested Connection 400 V, 16A-CEE plug Dimensions: 1460 x 940 x 580 mm LxDxH New machine with 24 months warranty Option: Undertable Maintenance contract More TOP sheeters in stock!

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 425/45/H45 mm -Weight: 1.7 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 27 x 192 mm -Weight: 0.25 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 3 pieces -Dimensions: 192/27/H27 mm -Weight: 0.15 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 202/27/H27 mm -Weight: 0.25 kg/piece

PLC control, machine control, module -Make number: 2529 and 2530 -Serial number: 109-998-4201b-2 -Dimensions: 190/130/H20 mm -Number: 2x available -Price: per piece -Weight: 200 g

planing lenght: 525 mm table surface area: 500 x 300 mm workpiece height: mm dimensions of machine L x W x H: 1,98 x 1,06 x 1,42 m Accessories: vice (width of jaws 200 mm) on rotary plate, vertical shaping device, tool clearing The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 65 mm -Piston diameter: 125 mm -Piston rod: 32 mm -Price: per piece -Number: 2 pieces -Dimensions: 345/144/H144 mm -Weight: 9.3 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 230/49/H49 mm -Weight: 0.85 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 75 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 4 pieces -Dimensions: 205/45/H45 mm -Weight: 0.95 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 412/54/H54 mm -Weight: 1.60 kg/piece

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 525 mm -Dimensions: Ø 42 x 525 mm -Weight: 2 kg

Milk Homogenizer Capacity 20.000 lt/h Motor: 90 kW 2 stages Hydroulic control

turning diameter over bed: 1400 mm turning diameter over slide rest: 1400 mm turning length: 5000 mm workpiece weight: 25 t turning speeds: 0,6-300 U/min : 4-jaw-chuck diameter: 800 mm control: Siemens transmission ratio: 3 total power requirement: 100 kW weight of the machine ca.: 70 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

intermediate table GUK ZT 520; cleaned and tested; Working width 520mm; height-adjustable; Speed adjustable; suitable for connection to GUK folding machines. Intermediate transport table GUK ZT 520; cleaned and checked; working width 520mm; adjustable in hight; adjustable in speed; used for GUK folding machines.

Measuring device for air conditioning units, air conditioning systems, cooling units -Type: Testo 523 -with: various hoses -Quantity: 1x measuring device with case available -Dimensions: 490/400/H130 mm -Weight: 5.5kg

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 525 mm -Length: 585 mm -Plate thickness: 28 mm -Plate: is solid -Groove width: 20 mm -Grooves spacing: 127 mm -Thread: M12 -Weight: 63 kg

Computer, board computer, organizer -Manufacturer: CV90-52689-12 -Type: CV90-52689-12 -Number: 2x organizers available -Price: per piece -Weight: 0.8 kg

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

Offset printing machine Ryobi 526 GXP Year of Make: 2006 Format: 375 x 520 Print Count: 65 million Print Turn: 2-4 PDS E Autoplate Double sheet inspection Alcolor Dampening Mechanism Ryobimatic all washing facilities Technotrans Grafix Shed Feeder in production

Clamping plate, welding table, welding table, straightening plate, construction table -Width: 1840 mm -Length: 5200 mm -Height: 850 mm -Sheet thickness: 28 mm -with supporting ribs -Weight: 2400 kg

Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kalenderstanze - Calender Punch Machine Renz Super 520 Year 1967 - Serial-No. 3659 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Make: YOUNG Type: JF 520 Year of construction 1992 Machine weight : 2200Kg Total weight: 2600kg Location : Haiger Price: 24.000 € excl. VAT. Description: Digital display, Fabr. Heidenhain, microprocessor control, profiling device, Fabr. Diaform, Machine Lighting, Coolant System, Sine Magnetic Clamping Table, Fabr. Jung, type SM 50 Specifications: Clamping surface (L x W in mm) 600 x 200 Grindable surface (L x W in mm) 600 x 250 Magnet size max. mm 600 x 200 Grinding wheel dimensions max. mm 225 x 25 x 51 Distance table/spindle center mm 350 (+50) Table longitudinal feed pendulum m/min 1 – 20 Creep gear mm/min 0 – 500 Grinding spindle drive speed rpm 800 – 4200 Power kW (w/creep gear) 2.2 (3.5)

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

S. No.: 1139 // Print counter (m): 66,6 // Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Powder device: Grafix

Copilot system with touch-screen monitor Rounding and backing station 1st gluing station with viscosity control, book mark suction device 2nd gluing station Head and tail bending station Gauzing unit Kolbus BF 527 casing-in unit Kolbus FE 604 book forming and pressing machine Casing prestacking conveyor Gluing station with circulation and premelter Backlining and headbanding station pressing station with teflon band Case prestacking conveyor Case bending machine Case forming station Case magazine right hand infeed Kolbus DS 391 stacker Kolbus SU 651 Kolbus HD 142P three-knife-trimmer including all the cutting tables and knife changing unit Kolbus FS.A FS.L XMT 680

table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5202 -Type: 2083015202 -Number: 5 tax cards available Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.33 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5201 -Type: 2083015201 -Number: 16x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.36 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5203 -Type: 2083015203 -Number: 19x control cards available -Price: per piece -Dimensions: 20/190/H260 mm -Weight: 0.28 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: MF 04 520-HN -Price: per piece -Quantity: 4 available -Weight: 0.2 kg/piece