gto 52 2 used for sale

The scope of delivery includes: 01x Shelf connector, used for shelf spacing: approx. 250 mm Total length: approx. 330 mm Cross-section: U 30 x 52 mm Material color: blue Weight: 0,46 kg | Pcs.

; Gross weight [kg]: 2238; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 418

Caterpillar DE220GC Generator Set specifically designed for stand-by duty.; Gross weight [kg]: 1933; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 325

The scope of delivery includes: 01x Kolli flow rack frame, used Manufacturer: Tegometall Type: CI Material color: white / galvanized Material color (rolls): white for truss width: approx. 2,800 mm Total width: approx. 2,780 mm Total depth: approx. 2,450 mm Total height: approx. 110 mm Further data on the flow rack frame: Number of roller strips per segment: 18 pieces Roller strip spacing: approx. 130 mm Tray width: approx. 440 mm

; Power [PS]: 272; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 500

; Power [PS]: 299; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 610

; Gross weight [kg]: 3500; Engine: N67TM7; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Stage V version available: Deutz TCD7.8 - Genset 220 kVA St5 SuperSilent- DPX-21006 + €44.000, -; Water Tank Volume [l]: 500

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

; Gross weight [kg]: 2420; Engine: NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, -Deutz TCD4.1 - Genset 110 kVA St5 SuperSilent- DPX-21004 + €23.500, -; Water Tank Volume [l]: 360

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

Spiral kneader Diosna W 240 A with 2 boilers Diosna spiral kneader W 240 A in good used condition with stainless steel spiral.The kneader is suitable for industrial and craft bakeries. The kneader and the boilers are driven by gear. -for max. 240 kg dough or for max. 150 kg flour -Stainless steel spiral kneader -digital control -Boiler inlet with pliers locking -with Siemens touch panel control -robust machine -more pictures and information on request -Shipping and trade-in on request -Machine can be viewed and tested in our warehouse

Emergency generator set 200 kVA Volvo / WA-V 200 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine type: TAD 733 GE Engine No.: 5312956418 Motor power: 201 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 M M 6S/4 Gen.Nr.: 39786300005 Generator capacity: 200 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.200 Height approx. mm: 2.200 Length approx. mm: 3.600 Weight approx. KG: 3.550 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediatel ...

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 822

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

; Gross weight [kg]: 1500; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150

Turbulent mixer / paddle dryer Manufacturer : Drais Volume : 2500 ltr. Material : wetted areas in stainless steel Drive : 57 / 40 KW Operating pressure : 5 bar Electr. Power supply : 380 V / 50 Hz; --> Machine with extendable mixing unit.

Volume : 2200 ltr. Material : Mild steel --> Batch mixer, mixer shaft speed : 120 rpm

; Gross weight [kg]: 1600; Engine: BF4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 175

; Gross weight [kg]: 1250; Engine: F3M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 125

; Gross weight [kg]: 1550; Engine: Deutz F4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, Straßenzulassung, - Super Silent Canopy, - Stage V version available: DPX-21001 + €5.500; Water Tank Volume [l]: 175

; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1000

The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stand ) Manufacturer: Jung Heinrich Type: Esmena Material color: sendz. galvanized for shelf spacing: approx. 250 mm L – Profile: 85 x 40 mm Weight: 0,68 kg | Pcs.

with side panel 22 degrees, base frame can be staked out, mobile with 4 swivel castors, in a short time a flawless chimney surround in the best Create quality without helpers: - Make a stencil depending on the size of the chimney and roof pitch - Mark and cut out sheet metal parts according to a template - Apply cut sheet metal parts to the template - Flanging and folding sheet metal parts - take over the edging after completion - The raised back part prevents the roof tiles from tipping over Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 300 - 1200 mm Sheet thickness max. steel: 0.8 mm Machine Number: 129 Weight: 70 kg Dimensions: 1340 x 1160 x 1100 mm Colour: blue

Rheon VX is a series of stress free dividers, which can divide most of doughs - even extremely moist. From rye tin bread to italian ciabatta flat bread (see photos for examples and our test products). The machine has been fully renovated in 2020 and is ready for work! Weight range: One row: 100 - 2000 gr two rows: 30 - 1500 gr Length range: 75 - 999 mm Max. cutting speed per row: 20 cuts per minute. If you find the machine interesting, let me know via phone, mail or whatsapp!

In good condition Koma KTR-1-240-2400 Turbo runner tunnel freezer on Freon. Designed to be highly efficient and for continuous rapid freezing of fresh products like bread, meat, pastries, fruit and more. The quick freezing makes sure that the quality and structure of the food stay in perfect condition. The freezer consists of 8 modules of each 3 meters in length. These modules make it easy to expand or adjust the Koma to the needs of the customer. The Koma tunnel freezer comes with infeed/outfeed, compressor sets, condensers, electric cabinets and a Koma Multicell controller. This freezer is originally used to freeze 1-kilo packages of lasagna. The food is placed on the infeed belt that has a height of 950 mm and then goes into the Koma Turbo Runner. The food gets transported through the Koma on a plastic transport belt with a length of 24 meters and 2,4 meters wide. When the product  ...

Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. This tunnel freezer is currently assembled in our warehouse, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Brand: Koma Type: Multi-Deck KM ...

Cutting length: 4300 mm Cutting height: 2150 mm automatic: , ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length ...

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Configuration: ·       Unwinder ·       Teknek web cleaner ·       Corona treatment ·       6 Flexo Print Stations 6 × IS UV dryers ·       Cold foil module ·       Cold foil unwind/rewind ·       Lamination module ·       Laminates unwinder ·       Die-cutting section with 3 stations ·       EL camera system ·       Rewinder Tooling included: ·       Print cylinders + magnetic cylinder + varnish roller: o Sizes: Z87, Z96, Z110, Z132, Z140 o 5 print cylinders of each size o 1 varnish cylinder for print station 6 ·       16 anilox rollers Additional information:  End of 2024: full revision of the printing units and related tools completed

offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg

Used Sabroe PAC 202 LM-A water cooled chiller on R717 (Ammonia). Complete with 1 Sabroe SAB 202 LM screw compressor, Schorch KN7315L-AX01B-Z electric motor - 50/60 Hz - 315/360 kW - 2965/3565 RPM, Sabroe OHU 4131 oil separator with a volume of 610 liter, Sabroe GHEA 083002-C separator with a volume of 1650 liter, Alfa Laval MK15-BWFGR plate heat exchanger, Alfa Laval MK15-BWFDR plate heat exchanger and a control cabinet with a Siemens TP700 Comfort controller. The chiller has a capacity of 1668 kW at a water inlet of 12°C and outlet 6°C. Specifications: Brand: Sabroe Type: PAC 202 LM-A Product type: Water cooled chiller Capacity kW: 1668,0 Capacity tons: 474,3 Refrigerant: R717 Weight: 10,700 kg Sizes: 5700x2330x3100 mm (LxWxH) Compressors: Sabroe SAB 202 LM Display: Siemens TP700 Comfort

We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h

Diosna D 240a plus with 2 boilers Tipper Diosna HK 166 - after general overhaul

; Gross weight [kg]: 13000; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500

; Gross weight [kg]: 13000; Engine: DC13 072A/02-12; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 2500

; Gross weight [kg]: 5000; Engine: DC09 72A/02-11; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 1200

; Gross weight [kg]: 5500; Engine: DC09 072A/02-13; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, , - Stage V version available: DPX--21008, + €34.500; Water Tank Volume [l]: 1200

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

; Gross weight [kg]: 22100; Engine: Perkins 4016-TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

; Gross weight [kg]: 8950; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1360

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG