gto 52 2 used for sale

Inv. Num. : 8956 Type: Easy Cut 6001.20PG Producer: MicroStep Created: 2006 Parameters: Control system: MSNC 500 Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 38 mm Plasma source: Formica 163 W Machine weight: 2700 kg

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

Key data: 65 mm, 660 mm

Control: SIEMENS Spindle passage: 65 mm Max. speed: 6,000 1/min Sub-spindle Z= 700 mm TOOL CARRIER 1 with milling spindle Milling spindle: 7,200 1/min B-axis 360° 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 230 / Y= +- 65 / Z= 845 TOOL CARRIER 2 14 stations with powered tools Speed Tools 7,200 1/min Travel: X= 140 / Y= +- 45 / Z= 810 Chip conveyor Filter Bar feeder INDEX MBL

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Presse à injecter BILLION 200T Bi-matière HERCULE H260-470/200 Commande Dixit 500 Année : 1998 Nombre d’heures: 23 000 heures Caractéristiques des 2 groupes d’injection : Groupe H260 : diamètre 32 mm - volume injectable de 116 cm3 Pression d’injection : 2205 bars Groupe H470 : diamètre 38 mm - volume injectable de 198 cm3 Pressions d’injection : 2327 bars Diamètre bague du plateau : 100 mm Distance entre colonnes : 610 x 610 mm Dimensions des plateau : 870 x 870 mm Course d'ouverture : 560 mm Epaisseur du moule min/max : 280-580mm Capacité du réservoir d’huile : 500 litres Interface robot Robot STAR 1000EMIII 3 Course en X : 2100 mm / Course en Y : 750 mm / Course en Z : 1000 mm

Working width: 2350mm, min. slitting knife spacing: 110mm, slot width: 5mm, slot depth range: 0mm-400mm, binding edge area: 45mm, max. material weight: 2000g/m². Documentation available. An on-site inspection is possible.

cutting diameter: max. 225 mm saw band length: 2.480 mm width of saw-band: 27 mm dimensions of saw-band: 2.480 x 27 x 0,9 mm cutting angle: 0 - 60 ° band speed: 20 - 90 m/min Cuttingrange 90°: max. 225 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 150 x 245 mm capacity 60 degrees: round: 90 mm capacity 60 degrees: square: 90 mm capacity 60 degrees: flat: 120 x 90 mm capacity 45 degrees: round: 145 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: flat: 190 x 150 mm total power requirement: 1,5 kW weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,5 x 1,2 x 1,6 m Documents: Saw Bands: 1x Coolantsystem: Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Trumpf TrumaBend V230 8 assen: Y1 / Y2 / X / R / Z1 / Z2 / V / W bovenste en onderste Willa hydraulische gereedschappen met Trumpf ACB-optie; hoekmeetsysteem 3 beweegbare plaatsteunen aan de voorzijde veel gereedschappen inbegrepen Capacity: 230 ton x 3100 mm Backgauge: CNC Control: Delem Passage between uprights: 2690 mm Max stroke: 365 mm Max distance between table -- ram: 535 mm Depth of throat: 410 mm Table width: 200 mm Locking speed: 200 mm/sec Working speed: 1 > 10 mm/sec Returning speed: 135 mm/sec Electric motor (power): 30 kW Length: 3660 mm Depth: 2120 mm Height: 3095 mm Weight: 17,7 ton

This 3 axes Wele RB - 212 was manufactured in 2016. It features an impressive X-Axis travel of 2120 mm, Y-Axis travel of 1200 mm, and Z-Axis travel of 800 mm. The machine is equipped with a Heidenhain iTNC 530 CNC system and can support a maximum weight of 3500 kg on its 2000 mm x 1100 mm table. Consider the opportunity to buy this Wele RB - 212 vertical machining center. Contact us for further details.

turning diameter over bed: 440 mm turning diameter over slide rest: 270 mm turning length: 1.500 mm center height over bed: 220 mm digital readout: FAGOR 3 Achsen turning diameter in the gap: 620 mm centre distance: 1.500 mm bed width: 280 mm spindle bore: Ø 52 mm turning speed range: 30 - 2.360 U/min 3-jaw-chuck diameter: 250 mm quick change toolholder: KLOPFER Typ GX2B drive capacity - spindle motor: 6,3 kW taper in tailstock-quill: MK 4 dia. of quill: 60 mm quill stroke: 200 mm coolant: voltage: 380 V total power requirement: 6,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. tool trolley with tool set 272 pieces. See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used extruder in good condition. Complete with motor, gearbox and heating bands

Key data: 4850 , 1768 , 80

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air blow gun 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m

USED TETRA PAK TBA 19 250ML EDGE FILLING LINE FOR SALE YEAR 2009 Item #: Usm-217 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 250ml edge Filling line for sale. 1-TBA 19 250ml edge filling machine, version 30v, year 2009, working hour 35000 2-Cap Applicator 30, Cap Flex 30, Year of manufacturing 2017, Working Hours 17000 3-Maak Packer Turner 4-Tetra Pak Easy ride and conveyors control system 5-paper trolly and conveyors Condition: excellent condition and still on production.

PreviousNext USED TETRA PAK A3 SPEED 200ML SLIM FILLING LINE FOR SALE YEAR 2010 Item #: Usm-221 Category Tetra Pak A3 Speed Used Tetra Pak A3 Speed 200ml Slim Complete Filling Line For Sale A3 Speed 200ml Slim Filling Machine, Year 2012, version 300v, Speed 24000 Packs Per Hour Helix Accumulator Straw Applicator TSA 22 Cardboard Packer 30 Speed Conveyors and Paper Trolly Condition: Line Still on production, can be seen on production. Tetra Pak maintained.

USED TETRA PAK TBA 19 250ML BASE 30v FILLING LINE FOR SALE Item #: Usm-234 Category Tetra Pak TBA 19 One used Tetra Pak tba 19 250ml base filling line for sale. 1-TBA 19 250ml Base filling line, year of manufacturing 2007, Version 30v, working hours 11900 2-Straw applicator tsa 21 3-tetra pal shrink tts 51 4-20m Tetra Pak conveyors and easy ride 5-Paper trolly Condition: Good

USED TETRA PAK TB 19 250ML BASE 20V FILLING LINE FOR SALE Item #: Usm-235 Category Tetra Pak TBA 19 Used TB 19 250ml Base Filling Line available for sale 1-TB 19 250ml Base Filling Machine, Year 2003, Version 20v, Non Aseptic 2-Straw applicator TSA 21 3-Easy ride and conveyors 4-Shrink TTS 51 Paper trolly and spare parts

REFURBISHED TETRA PAK TBA 19 200ML SLIM 30v FILLING LINE FOR SALE Item #: Usm-237 Category Tetra Pak TBA 19 Refurbished TBA 19 200ml Slim 30v Filling Line for sale 1-TBA 19 200ml Slim Filling Machine, Year of manufacturing 2007, Version 30v, Working hours 30000 2-Straw applicator TSA 21 3-Multi Shrink wrapper 65 4-20meter conveyors and Paper trolly Condition: refurbished and test run approved.

USED TETRA PAK A1 TCA 200ML FILLING MACHINE FOR SALE YEAR 2013 VERSION 900v Item #: Usm-238 Category Tetra Pak A1 Used Tetra Pak A1 TCA 200ml Filling Machine For Sale. Year of manufacturing 2013c version 900v, speed 14000 packs per hour. Working hours 5920 Conversion to 65ml available.

Centrifugal pump, diesel fuel Pressure 6 bar, Pump capacity 200 m3/h el.mootor Siemens 55 kw , 2940 rpm , 100 A 6 pcs.

USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 Item #: Usm-240 Category Tetra Pak TBA 19 USED TETRA PAK TBA 19 250ML SLIM FILLING LINE FOR SALE YEAR 2003 TBA 19 250ml Slim Filling Machine, Year of manufacturing 2003, Version 10v, With ASU Straw Applicator TSA 21 Multi Shrink 65 Conveyors and Paper Trolly Condition: Refurbished and Test Run Approved. Excellent Condition.

USED TETRA PAK TBA 9 200ML SLIM FILLING LINE FOR SALE YEAR 1993 Item #: Usm-243 Category Tetra Pak TBA 9 USED TETRA PAK TBA 9 200ML SLIM FILLING LINE FOR SALE YEAR 1993 TBA 9 200ml Slim Filling Machine, Version 130v, Year 1993 Straw applicator TSA 36 Shrink TTS 51 Conveyors and Paper trolly Condition: Good

Fabricante DMG-MORI Modelo DMF 260 Año 2011 CNC SIEMENS SINUMERIC 840D Mesa Superficie de la mesa 2.900 x 700 mm. Peso máximo sobre mesa 2.150 kg. Recorridos y avances Longitudinal (Eje X) 2.600 mm Transversal (Eje Y) 700 mm Vertical (Eje Z) 700 mm Avance rápido de los ejes (X,Y,Z) 40 m/min Avance de trabajo de los ejes (X,Y,Z) 40 m/min Aceleración de los ejes 4 m/s2 Cabezal Revoluciones 14.000 mm/min Cono cabezal SK 40 DIN 69872 Potencia motor principal 18,4 / 14 kW Cargador automático de herramientas Nº Herramientas cargador 30 Longitud máxima de herramienta 300 mm Peso máximo herramienta 6 kg. Diámetro máximo herramienta con posiciones adyacentes libres 130 mm Diámetro máximo herramienta sin posiciones adyacentes libres 80 mm Equipamiento Refrigeración 40 Bar / 600 l. INCLUDO Evacuador de viruta longitudinal INCLUDO Pistola de limpieza tala ...

Güntner S-GFD 080A/2x7-L Manufacturer: Güntner Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 1900kW Air temperature: 35º C. Fans: 14 pieces, 0.8kW, 3 wires, 400V, 50Hz Dimensions: LxWxH = 8400x2200x2220mm Weight: 3050kg Sound pressure level: 52 dB(A) 10m distance, Condition: Good , Tested for leaks and fans Test run Jenbacher, Dry cooler, Dry Air Cooler, Emergency Cooler, Dry Cooler.

Height 1550 mm Width 2950 mm Length 1750 mm Weight 4100 kg Capacity 200 l Electrical Supply: 400V 50Hz 3N Total power 78 kW Main Material Stainless Steel, Acid Resistant Cutter type Vacuum bowl cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 8 pcs. Vacuum cutter. Additional functions for heating or cooling the bowl

KRAZ 255 V1A, 1989 model year, 176 kW, diesel. OPTIONAL EQUIPMENT: FORESTER 2012TH HYDRAULIC LIFT. Registration in the EU, number, registration certificate.

Injection moulding machine Battenfeld TM 4500/2800 BJ 2002

- 2 matching pieces availebel - Cast iron not fabricated with welded construction - Made in ITALIA grey cast iron very ridged

2007 5 Color Counter: 74 million Max. Size: 520 mm x 740 mm Kersten unloading system Register system Bacher Powder sprayer: Grafix 72 Digital Plus Smart R 200 Online Remote control: ink and register - RCI Plate loading: EPL ColorPilot Smart Automatic wash up device: Ink rollers, impression cylinders, blanket cylinders Electronic sheet feeding control Nonstop delivery Control panel in delivery JobCard Reader ProfitPlusPremium package Carton device In production Located: Germany Available: immediately

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - / Contact us at -

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kW Condition: used, completely overhauled, with warranty Specification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit - New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for EMERGENCY STOP - Stainless stee ...

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 2x 132 kW Condition: used, completely overhauled, with warranty Specification: Pluridrive rolling mill 650 x 2100 mm - used External gearbox model - motor placed on the side of the machine - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - 2 new AC motors: Power 2x 132 kW - 400V, 50 Hz - Cardan joints between gearbox and rolls - New drive gearbox - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushes - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circu ...

Key data: 3000 mm, 4000 mm, 1500 mm

Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.

In excellent condition, shaft drive.

Twist Drill Bit Grinding Machine DAREX SP 2500 -Grinding diameter 1.5-26mm -3x tool holders -1x spare grinding wheel -Machine substructure -Documentation Dimensions: LxWxH 0.5x0.5x1.6 meters / Weight 80Kg

General SKU364X858 MakeBühler TypeDBZD-205R3S: DSAA-05ML LocationBarneveld Specified Features - Roll breaker MaterialStainless steel 1.4305 (303), Stainless steel 1.4552 Roll breakercheck Teeth height5 mm Roll sizesø 140 x 490 mm: ø 250 mm x 504 mm Fluted rollscheck Smooth rollscheck With hoppercheck Inletø 150 mm Outlet480 x 510 mm Motor7,5 kW 380/660 V 960 rpm Roll speed7.4—37 rpm With roll feedingcheck Motor0,37 kW 220 — 380 V 1380 rpm With variable speed drivecheck Information No.20 351 998: 20 306 807 Year of construction1985 Floorspace1,10 x 1,5 m Total height1,3 m Weight1200 kgRoll breakersNew arrivalsBühlerBreakers > Roll breakersNew arrivalsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the m ...

General SKU322X551 LocationBarneveld CEcheck MakeGero Main Features Materialstone Max.temp.1100 °C Specified Features - Drying oven Drying ovencheck Max. temperature1100 °C Number of compartments:1 Internal width500 mm Internal depth250 mm Electric capacity6 kVA, 400 V Number of doors:1 With fancheck Motor0,25 kW, 230/400 volt, 2850 rpm MaterialGlass, stone Information TypeDRSR-A-200-500/11 No.200801042Drying ovensNew arrivalsGeroDryers > Drying ovensNew arrivalsBrand > Gero What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X944 MakeCollin LocationBarneveld Type20x20 D Main Features Motor4.5 KW Inlet diameter30 mm L/D20 Specified Features - Single screw extruder Single screw extrudercheck Working hours:1324 Screw diameter20 L/D20 Number of heating zones:4 Electric heatingcheck AC-motor4,5 kW, 3x 380/220 V Inlet30 x 20 mm Feeding with hoppercheck Number of temperature controllers:4 MaterialStainless steel Information No.32000892 Year of construction1992 With switchgearcheck Floorspace1,60x0,60 m Total height0,80 m Extra SpecificationsWith Collin granulator, 0-1400 rpm, 220/380 volt :Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU362W985 MakeProdima Type2CC No.0500021 Year of construction2000 LocationBarneveld Main Features Motor1.5 KW Width1100 mm Specified Features - Lump breaker MaterialStainless steel 1.4301 (304) Lump breakercheck Double shaftcheck Rotor sizes⌀ 250 mm Teeth height100 mm Roll sizes ⌀ 250 x 1100 mm Inlet430 x 1100 mm Outlet430 x 1100 mm Motor1.5 kW, 230 V, 1449 rpm With variable speed drivecheck Rotor speed40 rpm Information Floorspace0.58 x 2.0 m Total height0.3 m Weight300 kg CEcheck Extra SpecificationsWith new motor and drive. :Lump breakersProdima SABreakers > Lump breakersBrand > Prodima SA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld  ...

General SKU388X982 MakeHermann Waldner No.787 Year of construction1984 Mounted on legscheck and wheels Pressure Working pressure0 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselcheck Capacity200 l. Vessel sizesDia. 800x900 mm Dished bottomcheck Dished top sidecheck With coverDN600 Manholecheck Top connectionscheck Outletcheck DN40 with ball valve With jacketcheck volume 25 l. Max. temperature90°C With propellor stirrercheck Motor1,1 kW, 230/400 volt, 915 rpm, (Ex) Speed mixing shaft915 rpm. Information LocationBarneveld Floorspace0,80x0,80 m Total height2,20 m Weight350 kg Extra SpecificationsWith ball cleaning, : John Crane, thermo syphon vessel, volume 5 l. Stirring vesselsHermann WaldnerStirring vessels  ...

General SKU388X980 MakeSeitz Enzinger Noll TypeTerra 60125 CWF Mach.No.14102 Year of construction1983 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.26 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4571 (316Ti) Nutsche filtercheck Filter surface0,26 m² Capacity143 l. Vessel sizesDia. 600x500 mm Plate sizesDia. 580 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletDN30 With jacketcheck volume 6,8 l. Max. temperature165°C Motor9 kW, 380 volt With hydraulic unitcheck Information Mounted on legscheck LocationBarneveld Mounted on wheelscheck Floorspace1,40x0,95 m Total height1,90 m Weight830 kg Extra SpecificationsWith hydraulic bottom opening and closingNutsche filtersSeitz Enzinger NollFilters > Nutsche filtersBrand > Seitz Enzinger Noll What  ...

General SKU390X1017 MakeZeppelin TypeHDS 200/5 SS/SS/AC No.82131346 Year of construction2017 Mounted on framecheck Main Features MaterialStainless steel Motor0.75 KW Inlet diameter213 mm Specified Features - Rotating valve MaterialStainless steel Rotary valvecheck Capacity10 l. Inlet213 mm Inlet flange sizesDN200 Outlet213 mm Outlet flange sizesDN200 (with valve) With hoppercheck 0,5 m³ With motor0,75 kW (500 V, 1435 rpm) Rotor speed21 rpm Information LocationBarneveld With switchgearcheck Floorspace0,7 x 0,74 m Total height0,53 m Weight190 kg CEcheck Extra Specifications Pressure: 1.5 bar: test pressure: 3.5 bar Maximum product temperature: 50°C Bulk density: 695 kg/m³Rotating valvesZeppelinRotary valves > Rotating valvesBrand > Zeppelin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

General SKU298X414 MakeNetzsch TypeCUM-250/SP LocationBarneveld Main Features Motor11 KW Inlet diameter95 mm Width250 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size50 mm Grinding room sizeDia. 250 mm Number of pins on house side:85 Number of pins on door side:108 Pin diameter8 mm Without sieve cagecheck Housing dimensions Dia. 400 mm InletDia. 95 mm Motor11 kW, 380 volt, 990-2955 rpm, (Ex) With variable speed drivecheck Speed990 rpm Information No.7297 Year of construction2000 Year of construction2000 Floorspace0,70x0,90 m Floor space0,70x0,90 m Total height1,33 m Weight400 kgPin MillsNetzschMills > Pin MillsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU242N157 MakePharmix sro TypeCislo 134 No.Type 23-D-2 Year of construction2004 LocationBarneveld Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2225 Ltr. Motor3 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity2225 Ltr Vessel sizesdia.1400mm x 1400mm Dished bottomcheck Manhole+/- 780x400mm Top connectionsdia.85mm, 4x50mm Outletdia.65mm With jacket375 Ltr Max. temperature143,6 gr.C. With propellor stirrercheck Motor3 KW, 400 Volt Speed mixing shaft85 rpm MaterialStainless steel 1.4301 (304) Information Floorspace2,1x2,1 M Total height3,3 M Weight1500 KGStirring vesselsPharmixStirring vessels > Stirring vesselsBrand > Pharmix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU437W1415 LocationBarneveld Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity20 l. Vessel sizesDia. 550x600 mm Dished bottomcheck OutletPneumatic valve With jacketcheck With propellor stirrercheck Motor0,37 kW, 220/380 volt, 1410 rpm Information MakeMedimex TypeMED 265 Mounted on legscheck With switchcheck Floorspace1,10x1,0 m Total height2,20 m Weight850 kg Extra SpecificationsWith ToolTemp temperature controller, type TT400, stainless steel vertical pressure vessel, volume approx 30 l. Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

General SKU430W1388 MakeAMS Type312 l., (200 l.) LocationBarneveld CEcheck Specified Features - Pressure vessel Material finishMirror polished Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume200 Ltr. Pressure6 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4539 (904L) Notified bodyClosed Capacity312 l. Vessel sizesDia. 800x850 mm Dished bottomcheck ManholeDia. 245 mm Top connectionscheck OutletDN50 Max. temperature-20°C/+200°C Information No.2709 Year of construction2014 Mounted on legscheck Floorspace0,80x0,80 m Total height2,30 m Weight400 kg Extra SpecificationsWith pressure gauge, window, ball sprayPressure vesselsAMSTanks > Pressure vesselsBrand > AMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

General SKU366W1294 LocationBarneveld MakeKHS TypeEFA 60.125CW12 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume150 Ltr. Pressure6 Bar Surface0.28 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,28m² Capacity150l Vessel sizesDia. 600x600 mm Plate sizesDia. 600MM Top connectionscheck DN25 Liquid outletcheck DN25 With jacketcheck Max. temperature-25°C/+200°C Nutsche filters Capacity150 l. MaterialStainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) Information No.963182 Mach.No.963182 Year of construction2000 Mounted on legscheck Floorspace1,20x1,15 m Total height1,90 m Weight860 KG Extra Specificationsthe bottom can be opened hydraulically by hand pump Technical specs Ex ...

General SKU330W719 LocationBarneveld Main Features MaterialStainless steel Volume200 Ltr. Motor0.75 KW Specified Features - Stirring vessel MaterialStainless steel 1.4552 Closed stirring vesselcheck Capacity200 ltr Vessel sizes⌀ 640 x 630 mm Dished bottomcheck Dished top sidecheck With covercheck With propellor stirrercheck Motor0.75 kW, 230 V, 1390 rpm, (Ex) Speed mixing shaft258/1807 rpm Information MakeMirap Mounted on legscheck With switchcheck Floorspace1.00 x 0.80 m Total height1.80 m Weight160 kg ATEX compatiblecheckStirring vesselsMirapStirring vessels > Stirring vesselsBrand > Mirap What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more m ...

General SKU351W929 LocationBarneveld MakeAubema Main Features Motor18.5 KW Width200 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills Hammer millcheck Rotor size340 mm Grinding room size200 x 600 mm Moving hammerscheck Hammer width190 mm With grinding platenscheck With hoppercheck Inlet200x300 mm Motor18,5 kW, 380/660 volt, 1460 rpm Speedinvullen Information Type2506/2 No.8227 Year of construction1993 Mounted on framecheck With switchcheck Floor space2,6 x 1,1 m Total height2,5 m Weight1000 kg Technical specs Extra informationOutput: 200 x 900 mmHammer MillsAubemaMills > Hammer MillsBrand > Aubema What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU243W302 MakeHosokawa Nauta TypeMBXO-20R No.M.19065.B Year of construction± 1982 LocationBarneveld Main Features MaterialStainless steel Volume2000 Ltr. Motor4 KW Specified Features - Conical mixer Conical mixercheck Capacity2000 Ltr. Largest cone diameter1924 mm Cone height2700 mm ManholeDN400 Top drivecheck Motor0,37 kW, 220/380 volt With variable speed drive63 rpm Motor4 kW, 380/660 volt With variable speed drive1500 rpm Bottom bearing pintle bearingcheck Bottom dischargecheck 2x Dia. 200 mm Outlet with sliding valvecheck MaterialStainless steel 1.4301 (304) Information Floor space1,93x1,93 m Total height3,80 m Weight3000 kg Extra SpecificationsInput diam. 500mmConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...