gto 52 2 used for sale

Manufacturer: SR, Type: TM 2000, Year: ca.2000, Lifting power kg: 1000, Length mm: 1500, Width mm: 540 Gabel aussen, Lifting hight approx. mm: ca.150, FREE TEXT: Preis 120 Euro.zzgl.Mwst, Year :ca.2000

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 250 mm -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Quantity: 2x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 250 mm -Weight: 2.3 kg/pc.

Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 240 mm -Flange: Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: 240/75/H75 mm -Weight: 2.2 kg

Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg

1. Combined Cycle 2. Manufacturer: Mitsubishi (Japan) 3. Commissioning year: 2007 4. Output: 248MW 5. Frequency: 50Hz 6. Pulverized Coal consumption: 1700 ton/day 7. Type: Gasification Furnace/Air Blowing Dry Feed System 8. Gas purification: Wet gas purification＋ Gypsum recovery 9. Gas Turbine １200℃ class 10. Total Running hours: approx. 32,000 hours 11. Design Thermal Efficiency: 12. Power Generation End４8(46)％ / Transmission End ４2(40.5)％ 13. (Thermal efficiency is based on high-level heat (HHV), 14. Low heat (LHV) standard in parentheses) • • -Gasification Furnace • -Pulverized coal Machine • -Heat Exchanger • -Gas purifier • -Booster • -Gas Turbine • -Steam Turbine • -Generator • -HRSG (Heat Recovery Steam Generator) -Transformer

Manufacturer: Nolting, Type: NRK 220, Year: 2010, Control: Automatic, Heating power in kW: 234, Fuel type: Späne, Bulk firing: no, Flue gas fan: yes, Heating medium water: yes, Oil/gas additional unit: Ölbrenner, Underfeed stoker: yes, Bunker discharging: nur Schneckenförderer, Boiler system can be separated for transportation: yes, Year :2010

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Siemens SIMATIC MP 277 10" Touch Panel HMI The Siemens SIMATIC MP 277 10" is a high-quality industrial HMI operator panel designed for demanding automation applications. It features a large 10-inch color touchscreen, providing clear visualization and intuitive control of machines and production processes. This panel is part of Siemens' SIMATIC HMI series and is widely used in industrial environments for monitoring, control, and data visualization. It supports multiple communication interfaces, making it compatible with a wide range of Siemens PLCs and automation systems. Key Features: 10" color TFT touchscreen display User-friendly interface for machine operation and monitoring High performance and reliable operation in industrial environments Supports MPI / PROFIBUS / Industrial Ethernet communication (depending on version) Configurable with Siemens WinCC Flexible / TIA Po ...

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: Höcker Polytechnik, Type: S 200, Year: 1985, Volumenstrom m3/h: 2850, Fan kW: 3 kW, Year :1985

Key data: 500 mm, 200 mm, 77 mm

Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Manufacturer: Hackemack, Type: KTR 2061, Year: 1997, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Number of lamps: 1, kW power 1 lamp: 10, kW power all lamps: 11,75, Lampen gerade eingebaut: 1, Power per lamp watt UV: 80, Conveyor lenght mm: ca 2000, Feeding speed m/min: 5 - 25, Drive power kW: ca. 1,5, Working height in mm: 980, Year :1997

Manufacturer: Perske Umrichter, Year: 1996, Type: 2004 neugewickelt, Year :1996

; Gross weight [kg]: 803; Engine: Perkins 404D-22TG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Case Maker Co-pilot system with touch screen for automatic size setting, menu guided make-ready and fault indication. Twin board pre-loading conveyors Twin board magazine feeders Central soft spine feeder with double reel holder for auto-splice and cutter for waste Magazine feeder of pre-cut cloth with miss control Mobile hot-melt gluing unit Heated glue application roller with scraper roller Cloth cylinder with grippers & exchangeable plates for rubber pad Counter shingle delivery with roller conveyor External glue application adjustment Glue viscosity device for automatic water supply control Pressing roller for crease-free cover to board application Single case request for operator set-up Variable DC drive Automatic lubrication Including accessories & manuals.

Manufacturer: Cefla, Type: UV 2000, Year: 2020, Work piece width min-max mm: 1300, Number of lamps: 2+1, Lamps inclined installation: yes, Lamps from below: 1, Conveyor lenght mm: 6500, Working widht mm: 1300, Conveyor lenght mm: 6500, Working widht mm: 1300, Required space L x W x H mm: L-6500, Year :2020

Manufacturer: Fischer Rückle, Type: FLA FDQ 2850 FCA, Year: 1993, Working width mm: 2850, Veneer thickness min mm: 0,4 , Veneer thickness max. min: 2, Feeding speed max m/min: 24, Year :1993

2K52-1 radial drilling machine was built in the 80s in the USSR. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as drilling, reaming, countersinking and threading in workpieces of various sizes. All these machining processes are performed by means of a reliable, tiltable spindle with an optimised speed range. This solution enables the machining of workpieces at different angles, without the need for repositioning them. The work head with spindle moves along the arm, enabling precise setting of the drilling point. The arm, in turn, moves vertically and horizontally along the rotating column, providing great flexibility during operation. The machine column rotates around its own axis, allowing the arm to be repositioned relative to the base. The 2K52 radial drilling machine is also equipped with, among others, a work tab ...

Manufacturer: Italpress, Type: GL 260 PS 5, Stages: 1, Lateral press: yes, Anzahl der Etagen: 1, Zylinderhub mm: 450, Beschickungsseite: Quer, Heizplatten aus Stahl: yes, Heated by: Elektro, Spezifischer Druck: 700 Tonnen, Anzahl der Presszylinder: 5/Durchmesser 300 mm, Schliessgeschwindigkeit mm./Sek: 2 Stufig, Press length mm: 1600, Pressing width mm: ca.600, Press power kg /cm²: 40-50,

Manufacturer: Böllhoff Membranenpumpe, Type: 001-200-DP, Year: 2009, FREITEXT1: Födervolumen 125 L/min, FREITEXT2: 8 Bar, FREITEXT3: Temperatur max 80 Grad, FREITEXT4: Übersetzungsverhältnis 1:1, FREITEXT5: geprüft ausgeliefert, Year :2009

Manufacturer: Weber , Type: KSV + KUV 2250, Year: 2005, Double sided sanding line: yes, Sanding width mm: 2250, Sanding hight mm: 120, Number of sanding belts: 2, Walze 3 Shorehärte : 2, Band 1 Kombiaggregat: no, Band 2 Gleich und Gegenlauf: ca.40, Band 3 Kombiaggregat Walze/Schuh: ca.40, Band 4 Kombiaggregat Walze/Schuh: ca.2,5, Band 4 Leistung kW : 1, Band 4 Drucklammellenband: yes, Combi unit roller/shoe: yes, Year :2005

Manufacturer: Telemecanique, Type: TSX DMF 242 A,

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve -Manufacturer: Bosch, Directional control valve -Type: 0 810 091 288 -Pmax: 315 bar -Quantity: 1x valve available -Dimensions: 215/46/H75 mm -Weight: 1.9 kg

LIKON 200C Horizontal Baler Machine Technical specifications: Engine power - 22 kW Year of production - 1994 With oil cooler Horizontal binding x 4 times Press force - 30 t Overall dimensions of the baler: 10000 x 2000 x 2750 mm Press weight: 10 t Loading opening dimensions: 1400 x 700 mm Bundle dimensions - 700 x 1100 x 1000-1200 mm, variable length With hydraulic oil No binding wire It worked in a printing shop without a conveyor belt, only with dry-shredded printing waste! Motorcycle hours - 62639 The baler is in good condition, ready for operation PRICE ON REQUEST! ----- Horizontal Baller Paal LIKON 200C Technische Daten: Motorleistung - 22 kW Produktionsjahr - 1994. Mit Ölkühler Horizontale Bindung x 4 Mal Presskraft - 30 t Gesamtabmessungen der Presse: 10000x2000x2750 mm Eigengewicht der ...

Manufacturer: Bütfering, Type: Vega 213 CE, Year: ca.1995, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: ca.2120 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Band 1 Leistung kW : 12 gleich und gegenlauf, Band 2 Kombiaggregat Walze/Schuh: 15, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 6-20, Feeding engine kw: 1,2, Intermediate sanding of lacquer: no, Vacuum table: yes, Segment sanding shoe: yes, Bürstaggregat : yes, Durchmesser/ Bürstenbesatz: 125, Year :ca.1995

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter<CRLF>vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Manufacturer: Höcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004

Manufacturer: Indramat Achscontroller, Type: KDV1-3-100/220/300 W1/220, Seriennummer: 758606-060 385 991, Gebraucht: yes,

Manufacturer: Hackemack, Type: KTR 2061, Year: 1999, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Working width min min mm: 1, Lampen Schräg eingebaut: no, Lampen gerade eingebaut: 1, Lampen von unten: no, Power per lamp watt UV: 80, Conveyor lenght mm: ca. 2000, Year :1999

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1-220, Seriennummer: Mod 9/11008-140, war verbaut inMaschine: IMA,

Manufacturer: Hackemack, Type: KTR 2040, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-60, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 10, Lampen gerade eingebaut: 1, Position of lamps: gerade, Power per lamp watt UV: 80, Working widht mm: 1350, od distance mm: 120, Conveyor lenght mm: 2000, Feeding speed m/min: 10-25, Conveyor: Stange, Drive power kW: 1,2, Working widht mm: 1350,

Manufacturer: Sorbini, Type: VS/32-BT-S 2000, Year: 1999, Number of units: 2, Working widht mm: 1350, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 80, Axle-diameter: 60, Engine power - kW: 1,5, Required space L x W x H mm: 2500 X 1200 X 1600, Type of use: Reinigen oberflächen, Year :1999

Manufacturer: MSK, Type: 290, Year: 1989, Cycles approx.: max ca. 240 / h, Electrical power shrinking tunnel kW: 366 kW - Gas, Through running hight mm: 2200, Working width mm: 800, Länge max 1200 mm, Year :1989

Manufacturer: IST, Type: UV Lignocure 200, Year: ca.1995, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Working widht max mm: 1350, Number of lamps: 1, kW power 1 lamp: 10, Lampenlänge mm: 80/60, Lamps straight installation: 100, Lamps from below: ca.2800, Elektronische Leistungregelung: 950, Automatische Werkstückerkennung : 5-25, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: Stange, Year :ca.1995

Transnorm belt conveyor GF 2000-1250-1100 RA2390 Technical data: Conveying length (NL): 2000 mm Framework width (NB): 1250 mm belt width (GuB): 1100 mm Framework width including Motor (MB): 1700 mm height (BH): 210 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.5-1.5 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 1120 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,4-1,3 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...