gto 46 used for sale

Transnorm conveyor belt GF 4600-700-600 RA2243 Technical data: Conveyor length (NL): 4600 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4600 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spee ...

Height 2000 mm Width 1900 mm Length 3150 mm Capacity 2396 l Power supply: 400V 50Hz 3N Total power 60 kW Main Material: Galvanized Steel Number of strollers 2 pcs. Steam power supply Type: Autoclave Horizontal

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg

cutting diameter: 460 mm saw band length: 0/ mm table height: 0/ mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, belt pulley -Diameter: 460 mm -Total width: 265 mm -Straps: 10 -V-belt width: 22 mm -Take: Ø 160 mm -Number: 1x pulleys available -Price: per piece -Weight: 78 kg -other pulleys in stock

V-belt pulley, pulley -Diameter: 460 mm -Overall width: 278 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 95 mm -Pulley: balanced -Weight: 144 kg -other pulleys in stock

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Three-phase motor, electric motor, brake motor -Manufacturer: Kobold, electric motor brake motor type KOD 467 ma -Power: 0.12 kW -Speed: 920 rpm -Shaft: Ø 11 x 20 mm -Design: B14 -Protection class: P 33 -Brake: 0.37 kpm -Dimensions: 245/160/H115 mm -Weight: 6.0 kg

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4650 N -Voltage: 230 V 8 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4656 N -Voltage: 230 V 19 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel with grooved profile -Outside: Ø 460 mm -Width: 80mm -Receptacle: Ø 203 mm -Total weight: 18.9 kg

Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm -Art.No.: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464S Serial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 465 mm -Piston rod: Ø 40 mm -Holes: Ø 35 mm / distance retracted 795 mm -Dimensions: 860/86/H127 mm -Weight: 24.6 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L -Item No.: 32 466 -Number: 2x adapters available -Dimensions: 70/55/H200 mm -Weight: 0.4 kg

Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters, load break switches, terminal blocks, load disconnectors, fuse load disconnectors -Manufacturer: Rittal, OM adapter -Type: SV 9340.460 -Quantity: 1x adapter available -Dimensions: 70/55/H210 mm -Weight: 0.3 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGC -Stroke: 460 mm -Quantity: 1x sled available -Dimensions: 650/50/H70 mm -Weight: 2.4 kg

Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7900 ( 4600 + 3300 ) Nominal / outside wid ...

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 184 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 70 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -other sizes also available in stock -Number: several engines available -Weight: 70 kg

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 196 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 78 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 74 kg

floor-plate length: 4600 mm floor-plate width: 1620 mm floor-plate height: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun

Conveyor belt rollers - transport rollers 14 pieces of conveyor belt rollers Steel pipe - welded - coated - red Diameter 80 mm Roll length 460 mm Installation length 460 mm Axle length 490 mm Wrench size 15 mm Weight approx. 5.3 kg -Unit price-

There are four Pfaff sewing machines available: 1) Industrial sewing machine Pfaff 461. 2) Industrial sewing machine Pfaff 463. 3) Industrial sewing machine Pfaff 1445. 4) Industrial sewing machine Pfaff 3337.

Builder: WILLIBALD Model: MZA 4600 Engine: MAN 460 HP Data: L. 10.700 x W. 2.500 mm x H. 3.800 mm Year: 2003 Operative Hours: 7.750 h Hourly Production: 160 m³/h Shredding System: 48 HAMMER Rotor Data: D. 1.000 mm Fuel Tank: 450 L Weight: 16.000 kg NOT OVERHAULED !

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1500 mm spindle bore: 55 mm faceplate: 550 mm steady: 140 turning speeds: 40-1800 U/min digital readout: Haidenhain bed width: 340 mm steady: 140 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mm turning diameter over slide rest: 240 mm turning length: 1500 mm spindle bore: 55 mm faceplate: 400 mm turning speeds: 40-1800 U/min digital readout: Haidenhain bed width: 340 mm 3-jaw chuck: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5334 mm cutting width: 1,3 mm cutting range - square -: 320 x 320 mm cutting range - flat -: 500 x 320 mm control: minipos 807 cutting speed: 16 - 80 m/min dimensions of saw-band: 5334 x 41 x 1,3 mm feed length: 580 mm feed length: multiple: 5800 mm total power requirement: 8 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Klöckner Möller AMX Frequenzumrichter, Type: AMX3-460-16-400, FREE TEXT: ULN:460 F:50/60, Free text 1: UN: 460V , Free text 2: IN 16 Ampere,

Description

Description

new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...

Benchtop centrifuge cooled Manufacturer: Hettich Type Rotanta 460 R Year of construction 2017 Rated voltage 220-240 V 1 Connected load 1,800 VA Max. capacity 4x 1,000 ml Weight approx. 141 Kg Temperature control, infinitely variable from -20 to +40 °C Including 6-fold angle rotor Dimensions: 770x706x456 mm, weight 141 kg Documents available

Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000

Technical data for push-through protection: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Push-through protection, used Material color: RAL5001 blue Profile: 50 x 50 mm Type: SKAC- 4,610 mm Clasp: 2 HK (hooks) Clear width: 4,610 mm Total depth: 150 mm Overhang: 100 mm Weight: approx. 12.12 kg | Pcs. 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Turning diameter over bed/face slide/crank: 460mm/258mm/785mm, center width: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000rpm, diameter lead screw/quill: 35mm/65mm, quill adjustment: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025.

cutting diameter: 320 mm saw band length: 4670 mm cutting width: 580 mm total power requirement: 7,4 kW weight of the machine ca.: 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. Infinitely variable settings of sawing feed with display of the current cutting speed. Workpiece counter: Number of workpieces can be preset. Selection swi ...

A total of 17 robots and 4x axes (7-axes) in mint condition and in their original packaging are available. 1) 1x industrial robot ABB IRB 6700-300/2.70, year of manufacture: 2023. 2) 7x industrial robots ABB IRB 7600-340/2.80, year of manufacture: 2023. 3) 9x industrial robots ABB IRB 4600-20/2.50, year of manufacture: 2023. 4) 4x 7-axis ABB IRBT 7004 and IRBT 4600 for IRB 7600 and IRB 4600. Documentation available. On-site inspection is possible. Individual sale is possible.

Key data: 1250

KRAUSS MAFFEI 125 T Reference: 125-460 C1 Condition: good Technical Specifications: Clamping force: 125 T / 1250 KN Tie bar spacing: 470 x 470 mm Mold thickness (Min/Max): 300 - 600 mm Platen dimensions : 770 x 750 m Opening stroke: 580 mm Injection weight : 195 gr Injection pressure: 2112 bar Screw diameter: 40 mm L/D ratio: 20 Interface robot EUROMAP 12 Dimensions & Weight: Weight: 4 100 kg Overall dimensions (L x W x H): 4,50 x 1,50 x 2,20 m

Leroy Somer LSA 461 M3 - Used - 150 kVa - Generator End

Working widths: 4600 mm Roller width: 4800 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 24 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely overhauled before delivery. We supply with guarantee. (Photo shows a similar machine after overhauling) • New drive can be designed according to case of operation, • extra charges: EUR 10,000.00 to 12,000.00 • Guarantee period: 6 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit

Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...