gto 46 used for sale

turning diameter over bed: 460 mm turning diameter over slide rest: 274 mm turning length: 1000 mm spindle bore: 58 mm turning dia. in gap: 690 mm spindle taper: Größe 6, DIN 55029 spindle turning speed - stepless: 30 - 2000 U/min feeds - longitudinal: 0,031 - 1,7 mm/U thread - mm pitch: 0,1 - 14 mm thread - inch: 2 - 112 Gang / inch. tailstock quill diameter: 60 mm tailstock quill taper metric: MT 4 tailstock quill stroke: 120 mm max. workpiece weight between centres: 500 kg voltage: 400 V / 50 Hz spindle motor: 5,5 kW total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,9 x 1,2 x 1,5 m • stepless adjustable turning speed via frequency converter, digital display, 2-axe-DRO, Made:NEWALL The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 460 mm : 460 mm : 460 x 460 mm saw band length: 5450 x 41 x 1,3 mm table height: 800 mm band speed: 20 - 100 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,2 t dimensions: 2,675x 2,15 x 2,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.:  ...

The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtra ...

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Leroy Somer LSA 461 M3 - Used - 150 kVa - Generator End

Indramat RAC 3.1-150-460-A0I-Z1-220 Spindle Drive Drive Controller For sale is an Indramat / Bosch Rexroth RAC 3.1-150-460-A0I-Z1-220 AC Main Spindle Drive Controller – used, but in good, functional condition Technical details: Supply voltage: 3 × AC 380–460 V Control voltage: AC 230 V Weight: approx. 49 kg Continuous current: approx. 92 A Max. output power approx. 55 kW Ambient temperature: +5 °C to +45 °C (operating), −30 °C to +85 °C (storage) Max. operating altitude: up to 1000 m above sea level Protection class: IP 10, humidity class "F" according to DIN 40 040 Integrated cooling via fan Integrated emergency stop system Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can  ...

Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46025 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Key data: 762 mm, 460 mm, 460 mm

Vertical machining center Okuma MB-46UAE Year of Make: 2004 Control OSP U100M Machinery ▪ Spindle – speed 8000 rpm. ▪ High-speed machining (Hi-Cut) ▪ Spindle load monitor (load monitoring) ▪ Thread milling (Herical-Cut) ▪ Workpiece zero points 50 pieces ▪ 200 Tool Corrections ▪ Manuals available (documentation) ▪ Tool changer with 32 positions ▪ Internal coolant supply Technical details ▪ Travel X-axis (column right-left): 762 mm ▪ Travel Z-axis: (table forward-backward): 460 mm ▪ Y-axis travel (spindle up-down): 460 mm ▪ Distance table surface to spindle nose: 150~610 mm Table ▪ Table size: 1000 x 460 mm ▪ Distance from the floor to the table surface: 800 mm ▪ Max. load capacity: 700 kg Spindle ▪ Spindle speed: 8,000 rpm ▪ Number of gears: infinitely variable ▪ Front bearing diameter: 70 mm ▪ Spindle: 11/7.5 kW � ...

Carruthers Six-pak 46000 Six station volumetric filler Serial: 46026 Stainless, Six station rotary volumetric filler, HMI touch screen controls, designed for cans or jars, 3Ph

Height pliers, parallel pliers, height transfer gauge, height transfer measuring device -Manufacturer: Hommel Werke, height transfer theory -Type: 4626 DBP -Dimensions: 165/140/H430 mm -Weight: 7.6 kg

Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor Manufacturer: Siemens, air damper actuator -Type: SQN70.464A23 -Quantity: 2 pieces available - Price: per piece -Cardboard dimensions: 150/100/70 mm -Weight: 0.4 kg/piece

format 46 x 66 cm Year of construction 2003 Flat stack feeder Vacustar 1st station: 4 folded sheets downstream knife shaft Noise insulation hood Counting device MS-Control without display Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator -Manufacturer: Opel, water cooler -Type: unfortunately not known -Hole spacing: lengthways 280 mm/crossways 445 mm -Dimensions: 460/165/H450 mm -Weight: 5.1 kg

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Side walls pair -Price: complete -Dimensions each: 1395/460/H15 mm -Total weight: 16 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, webbing, flat belt, drive belt -Width: 50 mm -Length: 4620 mm -Price: per piece -Quantity: 12 pieces -Dimensions: 260/210/H50 mm -Weight: 1.7 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 3 pieces -Dimensions: 192/27/H27 mm -Weight: 0.15 kg/piece

offer 12001 Specifications: - Material thickness 1.25 mm - radius 180 mm - Roller center distance 63 mm - material thickness at 40 kg/mm² strength 1.25 mm - Working speed approx. 6 + 12 m/min - Drive 400 V / 0.7 / 0.85 kW - Space requirement approx. W 550 x H 1250 x D 1000 mm - Weight approx. 120 kg - with: - E - foot button

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 60 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 202/27/H27 mm -Weight: 0.25 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 465 mm -Piston rod: Ø 25 mm -Dimensions: 235/160/H705 mm -Weight: 28 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm -Material: sheet steel -Dimensions: 765/440/H630 mm -Weight: 12 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 460 x 400 mm/405 x 305, Ø 250 mm -Material: sheet steel -Dimensions: 1255/440/500 mm -Weight: 30 kg

Replacement blades for cutting machines -Knife size: 127x25.4x1.1mm -Urschel: 46097 -Number: 33x available -Price: per piece -Weight: 25 g/piece

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg

V-belt pulley, pulley -Diameter: 460 mm -Overall width: 278 mm -Belts: 10 -V-belt width: 22 mm -Hole: Ø 95 mm -Pulley: balanced -Weight: 144 kg -other pulleys in stock

MBO T 460 folding machine; good condition; cleaned and tested; new folding rollers; new warehouses; new straps; 4 folding pockets; shed display; .max. Format 46x66cm;, min.15x17cm; MS control; knife shafts; Flat stack feeder. Folding machine MBO T 460; good condition; cleaned and checked; new rollers; new bearings; new belts; four pockets; stream delivery; max.size 46x66cm, min.15x17cm; MS counter; slitter shaft rollers; Folding Pile Feeder.

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.

Three-phase motor, electric motor, brake motor -Manufacturer: Kobold, electric motor brake motor type KOD 467 ma -Power: 0.12 kW -Speed: 920 rpm -Shaft: Ø 11 x 20 mm -Design: B14 -Protection class: P 33 -Brake: 0.37 kpm -Dimensions: 245/160/H115 mm -Weight: 6.0 kg

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4650 N -Voltage: 230 V 8 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Derinder Weber Type: ASC 460 Engine power : 1.1 kW Connected load : 400V/50 Hz/16 A Weight: 315 kg Dimensions: Width 910 x Length 890 (with bands 1800 mm) Thickness adjustment : from 0 - 15 mm Spring-loaded cutting system Pressure roller automatically adjusts to the cutting height Max. product setting 90mm Feeding and discharge conveyor with quick-release device Cleaning : Disassembly/assembly of all product-carrying parts without tools Integrated crate support Request a quote INTER-WIBA Sp.j. Ul. Krakowska 263 Pl 43-305 Bielsko-Biała NIP PL547-17-47-669 Phone 0048/33 812 58 60

Automatic hardcover counter strainer equipped with: • Automatic Cover Feeding • Automatic carton feeder from 1 to 5 pieces • With servo motors and 3 photoelectric sensors for the registration of the sheet on the side and diagonal cardboard • Automatic viscometer • Touch screen for convenient and quick adjustment of the machine It allows cardboard lining with window and cardboard lining with some irregular shapes (such as some non-straight side). Maximum format size of 900 x 460 mm

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4656 N -Voltage: 230 V 19 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel with grooved profile -Outside: Ø 460 mm -Width: 80mm -Receptacle: Ø 203 mm -Total weight: 18.9 kg

Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm -Art.No.: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 465 mm -Piston rod: Ø 40 mm -Holes: Ø 35 mm / distance retracted 795 mm -Dimensions: 860/86/H127 mm -Weight: 24.6 kg

- Pallet feeder FP110 - MBO Navigator Control - 1. Station 4 buckles - 2. Station 960/6 buckles - 3. Station (Herzog Heymann) 52/4 buckles - Mobil Cross Fold Z2 - Mobile delivery S BAP 82 ME - Mobile delivery ASP 66-2ME

TO WHOM IT MAY CONCERN ;