gt a3 used for sale

Offset GTO 46 Plus , good condition

HEIDELBERG GTO 52 • Year: 1988 • Size: 36 x 52 cm • Serial: 694596 • Counter: 45.396.545 • Size: 36 x 52 cm • Bacher Register 22 cm • Speed: up to 8.000 sheet/h • checked • cleaned • new rollers Good Working Condition test possible Please ask for quotation: send us an email

- single sheet feeder - conventional dampening units - perfecting 2/0 or 1/1 - standard powder spray - Plusversion

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

Sideloader ICEM GTE 20/502-4 d Four way forklift Strength 12500 kg Forks 800 mm Masch. No. 17346 Lifting height mm 5020 Height 2300 mm Free stroke 1200 mm Electric motor Batteries good Battery charger available Built in 2005 Weight without battery 2000 kg L x W x H: 240 x 180 x 220 cm The machine is in perfect condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

CNC carousel lathe with tool changer.You Ji GTH-35/45 ATC-I. Built 2012.Fanuc 0i-TD CNC Control.Planchime diameter 3,500 mm.Hydrostatic table - Max load 50 t.swing diameter max. 4,500 mm.Turning diameter max. 4,000 mm.turning height max. 2,200 mm.Stoesselplanweg X -1.750/+2.160 mm.Stoesselsenkrechtweg Z 1.500 mm.Table drive 60/75 kW.Speed 2 x 75 mm.Torque at the table 67,330 Nm.Tool magazine with 16 places.Tool holder 7/24 BT 60.Place requirement 12,375 x 8,210 mm.Machine height 7,920 mm.Full cladding.3-colors Signal lamp.NEW - 200 operating hours ! Immediately available;; As good as new

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

CNC Vertical Lathe VTL with Tool Changer.You Ji GTH-35/45 ATC-I.Year of manufacture 2012.Fanuc 0i-TD CNC Control.Face plate diameter 3500 mm.Hydrostatic table - Load max. 50 t.Swing diameter max. 4500 mm.Turning diameter max. 4000 mm.Turning height max. 2200 mm.Ram cross travel X -1750/+2160 mm.Ram vertical travel Z 1500 mm.Table drive 60/75 KW.Table turning speeds 2 ~ 75 mm.Torque at the table 67330 Nm.Tool magazine with 16 positions.Tool taper 7/24 BT 60.Floor space required 12375 x 8210 mm.Machine height 7920 mm.Full guarding.3-colour signal lamp (tower).AS NEW - 200 run hours !Available immediately.; As new

Lateral Perforating Unit GTO 46 (EXTRA TOOLS) • incl. numbering shaft • 2 extra perforating knives (unused)

Very well maintained GTO 52 with UV, yoc 2002, only 11 mil print number. comes CTP topseter 52 and developers

ID3420 Geotec Rotomax XL GTCi year/Baujahr 2012 approx. 10,000 hours/hours 15 t Crawler drilling rig, Flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective piping (178 mm) Crawler drilling rig, flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective casing (178 mm)

OFFSET PRINTING MACHINE HB GTO 46 + Vers. WITH N&P UNIT (numbering & perforating) M. No.: 676411N // Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000

146 MW - 50 HZ

GTO 46 z N+P Mojado Aquaprint

Impressions=33 m, Condition= Good , Availability= 2026-03-19, Stream feeder CP-Tronic! Alcolor dampening Baldwin cooling + Version Straight machine Checked and ready to move

max. format 34 x 46 cm Year of construction: 1954 Hot foil stamping machine 1 Slide preference 1 heating plate Delivery date: immediately Price on request. We deliver and install worldwide!

Gear motor, electric motor -Speed: 60 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Brake -Number: 1x geared motors available -Price: per piece -Dimensions: 415/170/H120 mm -Weight: 37 kg

Key data: 2613 , 3194 , 6300

2613 KW KKK condensing steam turbine Twin AFA46 GT6 from 2004 in good condition, used for sale. Manafacture: KKK Model: AFA 46 GT6 Type: Steam Condensation Serial Number: 4.746.137 Power [KW]: 2.613 Pressure inlet [bar]: 29 Temperature inlet [°C] 360 Pressure outlet [bar]: -0.8 Year of construction: 2004 Weight [kg]: – Dimensions LxWxH [cm]: – More information here: stromerzeuger-discount.de/angebote/dampfturbinen/2610-kw-kkk-twin-afa4 6-gt6/

Product number: 2734 Project number: 920239 Year of construction: 2002 Kettle: 280 litres, double jacket Heating: steam Weighing cells: Tedea-Huntleigh max 300kg Pump: Unibloc-PD displacement pump Flow meter: Endress + Hauser promass F Indicator: Ian Fellows LUCID-76711 Recorder: Eurotherm Chessell paperless graphic recorder Measuring device: Knick Stratos 2401 Cond Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 1200 x 2000 mm

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Gefran, power controller power regulator -Type: GTF-25-480 -Number: 5x power controllers available -Price: per piece -Dimensions: 150/60/H135 mm -Weight: 0.9 kg/pc.

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

Cavagnino & Gatti labeller Mod. GTC5/2 3XPSPSFGMP Year 2013 minimum length of the labels: 15 mm maximum length of the label: half the circumference of the bottle long/short label length difference: min 5 mm empty space between labels: min 15mm

Heidelberg GTO ZP 1990 standard water dumping very good condition in our warehouse 67269 Grünstadt in Germany

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

impressions: 41 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Alcohol numbering unit: optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. 468 • Heidelberg GTO 46 N+P • Year of construction 1986 # • Serial: 687883 • Size: 33 x 46 cm • Humidification: Aquatron • Including indentation mechanism and perforation • 4 sets of numbers • Tested and printed The machine can be viewed in our house. Please make an appointment with us. We specialize in supplying machines for printers of any size, and we are happy to help you.

Plus Version, Alcolor Dampening with Baldwin Cooling Circulation

Drive motor for Heidelberg GTO 46 From 1979 Model Ma No.: 665369 With pulley HDM: 42.101.051 1.5 KW Driving motor for Heidelberg GTO 46 From 1979 model / serial: 665369 HDM: 42.101.051 1.5 KW

Heidelberg GTOFP-S 52 Age: 1994 Format B3 (36 cm x 52 cm). Impression:101 mio pefector (2/3) never used in this printshop CPC 1-03./ CPTronic Powder unit Baldwin With all belonging equipment/tools/accesories/ books & manuals. In very good condition-free of damages on cylinders and gears. In production and can be tested. Available: immediately

Key data: 250 mm, 604 mm

CNC Double Spindle Turning Center 8-Axis Goodway GTZ-2600Y Year of construction 2015 First commissioning at the end customer in 2018 Siemens 828D CNC Control 8-axis Turning diameter 250 mm Turning length 600 mm Main spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Sub-spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Counter spindle longitudinal travel B: 690 mm. Tool turret I 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Perpendicular travel Y: +/- 50 mm (for off-center machining) Tool Turret II 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X2 : 210 mm Longitudinal travel Z2: 620 mm.  ...

Year of construction unknown suitable for GTO 52 2 numbering machines, 7 digits, counting forward Perforating device vertical Delivery date: immediately from stock Price on request. We deliver and install worldwide!

M. No.: 701 235 Counter: 54,356,348 Format (cm): 36x52 Dampening: Stenz-Dampening-System

one used offset printing machine Heidelberg GTO 52 2 Year of manufacture 1997 Format 36x52cm DDS dampening system

Reference Num.: 4116 Brand: Heidelberg Type: GTO 52 Construction year: 1991 Impressions: 20 mio Size: 360 x 520 mm Available: directly Status: In production Location: Deutschland Sheet size: min 105 x 180 mm, max 360 x 520 mm Printing speed: max 8,000 sheets/hour Printing units: 1 Machine size: Length: 1,350 mm, Width: 1,400 mm, Height: 1,550 mm Total weight: kg 1,370 / lbs 3,020 Power: KW 2 / hp 2