gt 128 1 used for sale

max. plate size: 41,4 cm max. speed plates: 29 /h incl. Rip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston Ø: approx. 80 mm -Piston rod: Ø 32 mm -Stroke: 148 mm -Number: 2x available -Price: per piece -Dimensions: 600/135/H135 mm -Weight: 13 kg

EAGLE eVision 1530 F4.0 4kW fiber laser was built in 2016 in Poland. The machine has been maintained and upgraded on an ongoing basis throughout its service life. In 2021, the cutting head and modules in the laser source were replaced. The laser cutting machine is designed for machining sheet metal made of, among others, stainless steel and aluminium. The state-of-the-art 4kW fibre beam cutting technology, combined with a stable work table and a specially designed cutting head, achieves excellent dimensional and shape precision over the entire workpiece area, regardless of the cut material. The low cutting edge and small heat-affected zone additionally ensure that the workpiece geometry is not altered during machining at the edges of the material. The eVision 1530 F4.0 fiber laser is offered with equipment consisting of, among others, an intuitive BECKHOFF CNC controller and a DONALDS ...

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 18 mm -Length: 35 mm -Dimensions: 215/153/215 mm -Weight: 6.8 kg

MALMEDIE DIE Adjustable drawing speed with inverter • Minimum worked diameter 15 mm • Maximum worked diameter 25 mm • External dimension coils 1,250-1,300 mm • Internal dimension coils 800-900 mm • Length 700-1,300 mm • Weight 1.500 Kgs • Wire surface treatment bonderized with soaped • Tensile resistance approx 500 N/mm2 The drawing machine normally work the raw material over mentioned with the follow specification: • Number of drawing passage 1 • Drawing die sizes 120x45 mm • Lubricant now used oil • Max area reduction 6 to 8 % • Drawing speed adjustable with inverter

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 101 mm -Dimensions: 85/123/H118 mm -Weight: 4.5 kg

- 6 bottle lines - WITHOUT OZONE GENERATOR - Machine in working order - Machine available immediately - Video available on request

: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

live point, live center, live morse taper, live -Manufacturer: Röhm, live center type 110 H -Barrel tip: shaft-bearing -Intake: MK5 -Number: 2x center point available -Price per piece -Dimensions: Ø 92/255 mm -Weight: 4.7 kg/pc.

Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 40 mm -Clamping depth: 190 mm -Machine vice: rotatable -Dimensions: 500/380/H170 mm -Weight: 43 kg

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -for discs: Ø 50 mm -Speed: max. 18,000 rpm -Case with: accessories -Dimensions: 430/360/H90 mm -Weight: 2.2 kg

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 50 mm -Clamping depth: 105 mm -Dimensions: 480/250/H160 mm -Weight: 49 kg

Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.

Key data: 1 t

Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co.  ...

Transnorm belt conveyor 1200-600-500 RA1987 Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1200 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW-Eurodrive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,6 m/s Weight: 60 kg Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 1,6 scope of de ...

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -Short taper: 5 -Through hole: Ø 42 mm -Weight: 8.7 kg -Scope of delivery according to pictures

Blume transfer roller conveyor slider 90° 1880-610-580 RA2045 Make: Running direction: both directions Roller width (RB): 580 mm Nominal/outer width frame (NB): 610 - 670 mm Length: 1880 mm Roller distance: 75-80 mm Ejector side: both sides Motor: drummotor Interroll 24V Lifter: pneumatic cylinder Currently set high: 875 mm Conveyor speed: freely adjustable with frequency converter between 0.275 and 0.667 m/s Optionally available: Light barrier scope of delivery: supports Features: condition: very good (used) Construction year: 2012 nominal voltage: 24V angle: 4x 90° Conveying length in mm: 1880 Nominal / outside width in mm: 610, 680 Roll width in mm: 580 Roll division in mm: 75-80 Driven: YES Engine type: Interroll Trommelmotor Conveyor speed m / s: 0,275 - 0,667 scope of delivery: including supports without side guides For individual, expert advice, simply get in touch with us. ...

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -both sides: different height adjustable -Steel frame: solid -Dimensions: 1100/510/H780 mm -Weight: 64 kg

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Shears: 200 mm -Dimensions: 350/100/H710 mm -Weight: 17.6 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 450 mm -Piston diameter: 40 mm -Dimensions: 600/75/H108 mm -Weight: 4.8 kg/piece

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...

Clamping clamps, pointed filing clamps, hand filing clamps, screw clamps, steel construction clamps, clamps, clamping tools -Inside diameter: 104 mm -Dimension: Ø 155/30 mm -Weight: 2.1 kg

Drill stand, drill stop, drill press stand, drill jig, drill bushing jig -Quick release device -Max. Height: 100mm -Dimensions: 400/240/H220 mm -Weight: 22 kg

Three-phase motor, electric motor -Power: 2.2 kW -Voltage: 220/380 V -Speed: 915 rpm -Shaft: Ø 34/28 mm -Length shaft: 120/60 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 495/240/H275 mm -Weight: 28 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 40 mm Truss Type: TRV1-290-124-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,100 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the pla ...

weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 120 x 50 mm Truss Type: TRV1-290-125-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,200 kg, with the same weight Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on th ...

USED TETRA PAK A3 FLEX 1000ML PRISMA FILLING LINE FOR SALE Item #: Usm-193 Category Tetra Pak A3 CF/Flex A3 Flex 250ml Slim and 1000ml Prisma Filling Line For Sale A3 Flex 250ml Slim filling machine with 1000ml Prisma Volume change kit, Version 100v, Speed 7000 PPH Straw applicator TSA 21 Cap applicator 45 for stream cap Tetra Pak packer TCBP 70 Tetra Film wrapper 67 eady ride and conveyors paper trolly Condition: Good

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet -Adjustable -Support surface width: 125 mm -Price: per piece -Number: 17 pieces -Dimensions: 278/125/H78 mm -Weight: 8.1 kg/piece

Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Workbench, work table, assembly bench -Width: 1500 mm -Depth: 700 mm -Height: 840 mm -Work top thickness: 40 mm -Lockable drawer: 1 -Weight: 74 kg

Switchgear, control system, UV light, automatic burner control -Honeywell: 7800 Series Base Layer Panel -Price: per piece -Number: 8 pieces -Dimensions: 145/150/H70 mm -Weight: 0.3 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 190 mm -Cone: Ø 88 mm -Dimensions: Ø 190/H23 mm -Weight: 3.6 kg

Kemper Spiral Kneader Type: SP 125 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 198 mm -Hole circle: Ø 105/4 x M10 -Hole circle: Ø 172/Ø 16 mm -Dimensions: Ø 198/H21 mm -Weight: 3.3 kg

Technical data of the pallet rack crossbeam: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbeam, second choice Material colour: RAL 5010 blue Box profile: 140 x 40 mm Truss Type: TRV1-290-144-30 CE Agraffe: 5 HK (hook) Clear width: 2,900 mm max. load per pair of trusses 3,750 kg, with the same weight. Distributed Load 02x Locking pins, new Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting Note: The trusses are as good as new, but will be offered as second-choice trusses. Due to the storage, scratches or paint chips may exist. General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the plac ...

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 110 mm -Drawing: in the photos -Dimensions: 180/95/145 mm -Weight: 4.2 kg

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

Bosch alternator -Nominal voltage: 14 V 70 A -Type: 028 903 028 C -Dimensions 158/184/H145 mm -Weight: 5.5 kg

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Tires, solid rubber tires, tractor tires, forklift tires -Tire size: 18 x 7 - 8 -Rim: 4.33 R-8 -from forklift: Still type EFG 1.0/5002 -Number: 2 pieces -Price: complete -Dimensions: Ø 440/152 mm/piece -Weight: 25 kg/piece

Alcolor Vario continuous dampening Autoplate (semi automatic plate loader) Ink unit temperature control (Technotrans Beta C) Cooling and recirculation Impression-cylinder washing device - automatic Ink-roller washing device - automatic Blanket washing device - automatic Non-stop feeder Powder sprayer (WEKO AP 110) Preset Plus feeder Prinect Press Center AirStar Pro - Central air supply cabinet Prinect Easy Control - Color Measurement

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: adjustable from 75 to 180 mm -Recording: MK2 -Dimensions: 275/240/H260 mm -Weight: 22.5 kg

Bosch alternator -Type: 1100827 22A 76E 3 -Voltage: 12 V -from forklift: Still type EFG 1.0/5002 -Dimensions: 187/165/H140 mm -Weight: 4.6 kg