gt 128 1 used for sale

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 103/38 mm -Height: 20 mm -Hole circle: Ø 76/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 2x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.2 kg/piece

Seydelmann mixing grinder MG 160-B meat mincer with 160 mm hole plate diameter almost completely made of solid stainless steel including loading device 2-speed working worm 1-speed mixing paddle with 2 mixing arms forwards and reverse, approx. 300 liters hopper capacity approx. 150 kg mixing capacity including brand new cutting set including separation unit

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer diameter: 168 mm -Height: 20 mm -Delivery of: steel/stainless steel cover plates possible -Number: 2x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.5 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 197/124 mm -Height: 20 mm -Hole circle: Ø 164/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 122x pillows available -Price: per piece -Weight: 0.5 kg/piece

Treif Felix 100-CE dicing and strip cutting machine Performance max. 0.8 t/h Including one grid set for cubes (consisting of two single grids) Including cutting knife Max. cutting-off length 0.5-32 mm Click & go quick change gridset system Refurbished condition

number of heads: 2 drilling capacity diameter min.: 4 mm drilling capacity diameter max.: 12 mm serial no.: 26214 dimensions of press (L x W x H): 64 x 102 x 105 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 198/135 mm -Height: 20 mm -Hole circle: Ø 164/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 49x pillows available -Price: per piece -Weight: 0.4 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 200/142 mm -Height: 20 mm -Hole circle: Ø 171/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 192x pillows available -Price: per piece -Weight: 0.3 kg/piece

Seydelmann AE 130 Automatic Grinder / Mincer Year of manufacture 2007 130 mm hole plate diameter 2-speed working worm 2-speed feeding worm made of stainless steel Rectangular to the working worm Conical and extra wide Processing temp. up to -10°C Hopper capacity approx. 130 litres Separation unit optionally available Brand new cutting set

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 1400 mm -Piston rod: Ø 15 mm -Recording piston rod: M12 x 1.5 mm -Pressure: max. 12 bar -Dimensions: 1570/50/H50 mm -Weight: 8.1 kg

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of feeders: 6 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 190 mm -Bolt circle: Ø 122/Ø 12 mm -Dimensions: Ø 190/H23 mm -Weight: 3.5 kg

serial no.: 9174 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 1 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 10 mm serial no.: 14494 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm serial no.: 70010 Dimensions (L/W/H): 60x105x85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 188 mm -Hole circle: Ø 132/4 x M12, 4 x M14 -Hole circle: Ø 173/Ø 9 mm -Dimensions: Ø 188/H97 mm -Weight: 6.5 kg

Valve, control valve, emergency stop valve -Type: VAC-14 VIZ-3311-LOVB-125G -Number: 10 valves available -Price: per piece -Dimensions: 195/90/H60 mm -Weight: 1 kg

Welding rail -from: Röschermatic VM-19/S/CE vacuum unit -Length: 495/90/H 160 mm -Weight: 1.5 kg

number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 8 mm serial no.: 71479 dimensions of press (L x W x H): 185 x 110 x 80 cm bore depth: 70 mm Stack height: 50 mm voltage: 380 V frequency: 50 Hz weight: ca. 160 kg Electric capacity: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Drive motor of: a cylindrical grinding machine VEB SIP315x500 -Power: 1.5 kW -Speed: 935 rpm -Drive shaft: 28 x 60 mm -Design: B5 -Protection class: IP 44 -Dimensions: 360/250/H250 mm -Weight: 27 kg

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Copy part head, copy head, part head -Copy head rail for: lathe -Dimensions: 100/81/H1747 mm -Weight: 43 kg

Lightbus combination input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, input-output module -Type: M-1400 -Input voltage: 24V DC -Price per piece -Number: 9x available -Dimensions: 270/75/H70 mm -Weight: 1kg/pc.

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 315/120/50 mm -Height: 21 mm -Delivery of: steel/stainless steel cover plates possible -Weight: 1.5 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 685 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 360/230/H250 mm -Weight: 36 kg

Key data: 1650 mm, 850 mm, 790 mm

Machine Details Stock-No. 1105-03958 Type of machine Machining Center - Vertical Make kafo Type WMC 1675 Year of manufacture 1990 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time CALL ME Freight basis EX WORK Price Technical details x-travel 1650 mm y-travel 850 mm Z-Travel 790 mm Dist. Milling Spindle - Table Surface 150 - 760 mm Table dimensions 1900 X 850 mm table load capacity 1500 kg Spindle motor 15 kW spindle speed: 6000 2 STEEP spindle taper BT 40 Rapid traverse 20 m/min tool change unit 24 places Weight of tools max. 14 kg CNC Controller: Fanuc 15M total power requirement 30 KVA weight of the machine approx. 14 t Additional information - In Excellent condition - With machien documents - Rigid taping -fanuc oM

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-100-125 PPV -Piston: Ø 100 mm -Stroke: 125 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 126/126/H358 mm -Weight: 8.3 kg

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

120 m pallet rack Galler New & used goods very good condition, see pictures. Height 5 m Depth 110 cm, blue Capacity 12 tons Beam length 2.95 m yellow Carrier with ballast /compartment 2550 kg Negotiation price: € 14.990,-- net from stock Offer consists of: + 41 pcs. frame pre-assembled, depth 110 cm, height 5 m +240 pcs. beam, length 2.95 m, 2550 kg ballast/compartment +480 pcs. Suspension locks + 82 pcs. concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers. (Changes and errors in the technical data, information and prices as well as prior sale res ...

4. Qty. 1 Second-hand Monoblok Mfc.: Stork Bepak BV Type: VS 60/110/12LV Built: 1992 Carousel monoblock 60 pourers 12 closing heads Fill inspector Missing cap Capacity: 20 000 bottles/h Sizes: 250, 500, 700, 750 ml

2 finger parallel gripper with return spring, PGN+ 160-2-AS-SD, Schunk, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. 2 finger parallel gripper with return spring, external closing, PGN+ 160-2-AS-SD, Schunk, second-hand - the gripper has been tested and is fully functional - one piece is missing a cover plate which will be replaced by us. Used - top condition The part was purchased from a company's spare parts warehouse and is in very good and tested condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude w ...

Product number: 2854B Type: Combi 12110 TF Serial number: combi-121100102-tf Year of construction: 2002 Belt width: 1100 mm Cooking length: 11000 mm Heating: thermal fluid, 600kW Steam: 140 kg/h per valve Exhaust: 2 x 1000 m³/h Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 20kW Dimensions: 13500 x 1750 x 2400 mm With belt washer and belt tension device

Gebr. Slotted cutter for tenon cutters Carpentry joinery machine such as KRÜSI ZA-66 or REX ZA 800 SATURN 5.109 Tool diameter: 450 Tool height: 31-60 mm Aluminum From location. No shipping!

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 148/90 mm -Height: 20 mm -Hole circle: Ø 125/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 88x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.3 kg/piece

Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 195/98 mm -Height: 20 mm -Hole circle: Ø 163/7 mm -Dimensions see: sketch in the photos -Delivery of: steel/stainless steel cover plates possible -Weight: 0.4 kg/piece

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston rod: Ø 25 mm -Stroke: 100 mm -Dimensions: 95/95/H310 mm -Weight: 6.1 kg

Spare parts kit 1975863 consists of (see pictures) Errors in the technical data and prior sale excepted.

Hydraulic unit, 330 bar, 10 circuits, 2 servo motorised pumps, 130L, Niehues, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was only in operation for a few years and is in top condition. Technical data - Operating pressure 330 bar, 5.1 L/min per pump, 130 L, valve voltage 24VDC, Here are the most important, system-relevant parts of the system, the current new value of these parts is approx. € 32,000. - 2 pcs servomotors 1FK7084-2AC71-1HA0, Siemens - 2 pcs radial piston pumps R 3.6 Hawe + Rotex coupling - 1 pc Aluminium tank NG 13 - 2 pcs pressure relief valves RDM2PT35SVG, Parker - 2 pcs 4/2 way valve D1VW002ENJW, Parker - 10 pcs Check valve CPOM2DDV, Parker - 10 pcs 4/3 way valve D1VW004CNJW, Parker - 8 pcs pressure reducing valve PRDM2PP35SVG, Parker - 20 pcs pressure switches EDS 3446-3-040 ...

MIG/MAG hose package -Length: 4.2 m -Water cooled -Weight: 1.9 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 400 mm -Width: 100 mm -Inside diameter: 280 mm -EKW46/3/-K5-V30KE DCW -Price: per piece -Number: 1 pieces -Weight: 14 kg

Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 123/80 mm -Height: 20 mm -Hole circle: Ø 100/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 120x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.2 kg/piece

grinding wheel diameter: 150 mm no. of working stations: 2 Stück total power requirement: 0,25 kW motor speeds:: 2900 min 1 Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outside/Inside: Ø 100/42 mm -Height: 20 mm -Hole circle: Ø 76/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 3x pillows available -Price: per piece -Minimum purchase: complete -Weight: 0.1 kg/piece

Combination with the Intermac CNC Crease Grinder Groove 1500 (no. 23020) - Serial Number: 90147 Weight: 200 kg Power: 0,8 Kw + internal extraction Length mm: 900 Width mm: 1000 Height mm: 1700 Working height: 1200 Transport size L x W x H: 0,9 x 1,0 x 1,7 Number of spindles: 1 spindle Condition machine : Good Control type: Manually Electric. Connection: 16A 3P+N+PE - For more information, please mail us: salestecfort.nl

AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 6 Type: A06B-1006-B700 -Power: 5.5/7.5 kW -Speed: 1500/6000 rpm -Shaft: Ø 32 mm -Construction: B14 -Brake -Dimensions: 700/260/H250 mm -Weight: 65 kg