gt 128 1 used for sale

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Access ramp set -Driveway width: 170 mm -Height: 230 mm -Dimensions: 810/290/H270 mm -Weight: 10 kg

Key data: 1180 KW, 1910 1/min

TO WHOM IT MAY CONCERN WE VE MTU ENGINE 16V 396 TB 34D EX GEN SET ENGINE AT OUR STOCK. ENGINE WAS USED EMERGENCY GENSET ENGINE . IT WAS USED ONLY 267HRS SINCE NEW ... ENGINE IN VERY GOOD CONDATION . PLS FIND ENGINE DETAILS ON BELOW TYPE : 16V 396 TB 34D ENGINE NO. : 5591283 YOB. : 1993 POWER. : 1880 KW .RPM. : 1910 / 1500 1/min ENGINE AT OUR WORK SHOP READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 1020/320/H140 mm -Connection: 230 V DC 1x39 W -Number: 3x lights available -Price: per piece -Weight: 16 kg/piece

Control Rexroth System 200 BTV30 Circulation diameter over bed: 160 mm Circulation diameter over face carriage 250 mm Chuck diameter 160 mm Turning length 300 mm Spindle speed 8000 min-1 12-speed revolver with attached Competition. Workpiece conveyor belt Conveyor Various tool holders

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Hydraulic cylinder: tilt cylinder -Stroke: 135 mm -Piston rod: Ø 126 mm / mount Ø70 mm -Cylinder: outer Ø 155 mm -Hole: Ø 50 mm / Dimensions see photo technical drawing -Dimensions: 365/260/H175 mm -Weight: 39 kg

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: double-acting, stroke 100 mm -Piston rod: Ø 56 mm -Cylinder: outside Ø 95 mm -Dimensions: Ø 200 x 370 mm -Weight: 23 kg

Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOTN-150 -Grinding wheel: max. Ø 150 x 25 x 20 mm -Motor power: 0.35 kW -Speed: 3000 rpm -Operating voltage: 380 volts -Dimensions: 410/200 / H1045 mm -Weight: 33 kg

The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

A complete unit is offered.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke travel: 150 mm -Piston rod: Ø 25 mm -Dimensions: 440/75/H75 mm -Weight: 5 kg

Quick release device, quick release, quick release vice, drilling device, machine vise, drill vise, clamping sleeve, collet, clamping device -Manufacturer: VEB, clamping device type TGL30-10206 -Size: 100 x 60 mm -Clamping height: max. 70 mm -Dimensions: 180/160 / H135 mm -Weight: 7.2 kg

• Load capacity 125 kg • Drum holder for drums appr. diam. 430 mm, drum weight max. 100 kg • Lifting height of drum lower edge above floor max. appr. 1,400 mm • Two-speed remote control (50 % and 100 %) • Central brake bar • Mobile • Electrically rechargeable with battery charger 230V/50Hz

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Tailstock, counter bearing for dividing head, dividing head -Tip height: 125 mm -Design: Angle adjustment -Tip mount: MK2 -Dimensions: 260/114/H145mm -Weight: 10kg

Extrusion recycling line as good as new EREMA type "Vacurema" for processing rPET, 700 operating hours, Year of construction 2020, Capacity 600 kg/h, Delivery time: Immediately. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 485/53/H53 mm -Weight: 1.85 kg/piece

Central lubrication, oil circulation system, progressive pump -Drive: Dietz type DR 90 8/4n -Motor: 1.1 kW 1420 rpm -Dimensions: 460/460/H230 mm -Weight: 27 kg

Ham press Erhard approx. 120 liters capacity, completely in stainless steel, compressed air operated, with intermediate boards and stainless steel brackets, Dimensions LxWxH approx. 107x59x99cm, weight approx. 180kg, good used condition, works perfectly

Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA59220-0125 -Stroke: 125 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 290/55/H55 mm -Weight: 1.25 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA60300-0050 -Stroke: 160 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 2.7 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 345/47/H47 mm -Weight: 1.0 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 160 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 292 mm -Weight: 0.3 kg/piece

Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 125 mm -Piston diameter: 16 mm -Piston rod: 6 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 20 x 236 mm -Weight: 0.15 kg/piece

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 120 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 165/40/H40 mm -Weight: kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 75 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 4 pieces -Dimensions: 205/45/H45 mm -Weight: 0.95 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 412/54/H54 mm -Weight: 1.60 kg/piece

Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994.

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

Electric motor, three-phase motor -Lenze: GFT 100-2 (0.6 kW 800 rpm) -Power: 0.6 kW -Speed: 800 rpm -Lenze fan: S2E 170 (0.05 kW 2500 rpm) -Shaft: Ø x L 28 x 60mm -Construction: B3 -Dimensions: 710/260/H200 mm -Protection class: IP54 -Weight: 31.5 kg

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Dimensions: 1015/950/1830 mm -Material: stainless steel -Weight: 90 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Banding machine BVM 16040 L; good condition; Welding width 1600mm; Product height 400mm; product scanner; Labeller; Conveyor belt 5600mm; Intermediate belt 1500mm; Shrink tunnel SC 16060 SD; Link band; cooling fans; Outlet roller conveyor 2000mm. Banderoling machine BVM 16040 L; good condition; sealing width 1600mm; product hight 400mm; scanner; Labeler; infeed belt 5600mm; intermediate belt 1500mm; shrink tunnel SC 16060 SD; link belt; cooling unit; Outfeed Roller Conveyor.

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Pressure reducing valve, condensate drain, valve, check valve, control valve -Condensate drain made of: stainless steel -Gestra: UNA 15v -Use: vertical -Pressure: PN25 -Connection: DN15 -Dimensions: 145/100/H200 mm -Weight: 7.1 kg

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 1200 mm -Width: 800 mm -Height: 170 mm -Plate thickness: 30 mm -with: support ribs -Weight: 328 kg

spindle diameter: 120 mm x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm turning speeds: 19-1900 U/min table-size: 600x1200 mm table load: 2000 kg spindle taper ISO: 50 : Feed: 0,042-1,46 mm/U weight of the machine ca.: . t dimensions of the machine ca.: . m Tool holder: Steep taper No. 50 Din 2080 3.5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit