130,507 used machines on RESALE, but how to find them? Machine Search
Paper drilling machine Hang 114-30-4; good condition; cleaned and tested; 4 drill heads; drill lubrication; drilling cooling; speed regulation; Table lifting speed adjustable; Drilling distance 36-260mm; Insertion depth 6-130mm; Insert height max.65mm; endless drilling tape; Table size 600x480mm; new table; new hood; new belts. Paper drilling machine 114-30-4; good condition; cleaned and checked; four heads; drill cooling; lubricating device; variable drill speed; table lift speed adjustable; adjustable drill offset 36-260mm; insertion depth 6-130mm; stack height 65mm; cardboard band under drill; table size 600x480mm; new table; new cover; new belts.
Stx MAN 16V32/40 Crankshaft 4 Pieces available in our stock in Istanbul Turkey Crankshaft is in good condition standard sized Tests are done for: Measurement Hardness Crack Bending For more information please contact with us: info@fin-marine
turning diameter: 555 mm turning length: 1500 mm turning diameter over slide: 290 mm 3-jaw-chuck diameter: 315 mm make: Röhn control: Monforts MTCK quick change tool holder: Multifix C steady: turning speeds: 2-2800 U/min transmission ratio: 3 face slide travel: 235 mm spindle passage: 70 mm tailstock quill taper MT: 5 total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,9x1,6x1,8 m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Warranty:, 1 year for continuous use, 2 years for standby use, Surplus unused 2022 generator., 2 similar units in stock; Gross weight [kg]: 1057; Engine: Cummins X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 71
Surplus unused 2022 generator set.; Gross weight [kg]: 6345; Engine: Cummins QSK23-G3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
QC11K 18×6000 hydraulic guillotine shears were built in 2018. This highly efficient machine is designed for precision cutting of sheet metal made from e.g. steel, non-ferrous metals, as well as selected plastics. Workpieces with a maximum thickness of 18 mm are machined by means of high-quality cutting knives with four cutting edges. All process parameters, on the other hand, are programmed on the intelligent DELEM CNC control with an intuitive interface and many useful functions. The QC11K 18×6000 guillotine shears weighs 40000 kg. Technical specifications of the QC11K 18×6000 guillotine shears - maximum cutting length: 6000 mm - maximum sheet metal thickness (Rm=420 N/mm2): 18 mm - maximum sheet metal thickness (Rm=700 N/mm2): 12 mm - work table height: 900 mm - back stop stroke: 1000 mm - adjustable gap between blades and cutting angle - motor power: 21 kW - power supply ...
Technical parameters Laser power 1000 W Laser source type optical fibre Source manufacturer MAX Photonics Length of laser waves 1064 nm Weldidng speed 0-120 mm/s Input current 230V 50Hz Kit includes: - Automatic wire feeder -Cooler 24 month warranty You will find no hidden costs with us We always present the final amount on sales quotes if the contract is signed within the quote valid period. We always evaluate shipping costs from our warehouse in Poland. B8a32e7mlf Laser welder LWH-1000-N The kit includes: - laser welder with cooling system - welding gun with adjustable focal length and set of accessories - fiber laser source MAX Photonics - Automatic Wire Feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 H ...
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
Dreh-Øüber Bett: 320 mm Dreh-Øüber Support: 185 mm turning length: 1000 mm Spindelbohrungs -Ø/ Aufnahme: 32 mm mm spindle turning speed range: (12) 85 - 2000 U/min feeds - longitudinal: 0,006 - 1,77 mm/min feeds - cross: 0,003 - 0,888 mm/min thread - mm pitch: 0,1 - 28 mm thread - module: 0,1 - 1,75 mm thread - inch: 2,5 - 75 inch. voltage: 400 V / 50 Hz power capacity: 2,2 kW weight of the machine ca.: 0.8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kneader Kemper F125 SL Kneading Machine Menger -Lifting kneader with fixed boiler -for max. 200 kg dough or .max 125 kg flour -with 2 speeds -Stainless steel boiler and lifting arm -with flour dust cover -Boiler diameter inside 90cm -Boiler height inside approx. 50cm -can be used on wheels with 2 locks
; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm
Tipo de máquina Laminado y recubrimiento (laminating & coating) Procesos Preparada para laminado WET y DRY Probhvzbzjx N Ucxezjf Sistema de corte Sistema de cuchilla para poliéster (blade cutting system for polyester) Alimentador Mabeg feeder Formato mínimo de hoja 32 × 29 cm Formato máximo de hoja 106 × 142 cm Velocidad mecánica máx. 70 m/min Velocidad de producción máx. 65 m/min
Spiral Kneader Diosna SP 120 AF Spiral kneader Diosna SPV 120 AF extendable - Spiral kneader extendable - for max. 120 kg dough or .max 75 kg flour - 2 speeds -Membrane keyboard - with 1 extendable stainless steel boiler - Spiral made of stainless steel - with pliers locking - Boiler is with friction wheel drive - Head hydraulically raising and lowering - Vat capacity 180 litres
IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...
Herbort 159D Homogeniser Serial: 1 Stainless homogeniser, 150l stainless hopper, 3Ph
Spiral kneader Kemper ST 125 A + 2 boilers used spiral kneader Kemper ST 125 A extendable with 2 stainless steel boilers immediately available in the warehouse in Bielefeld. Trade-in and shipping costs on request. Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Boiler diameter 90cm -Bott capacity: 300 litres Boiler drive by friction wheel Boilers are manually locked extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Stainless steel spiral and tools Boilers are also made of stainless steel Machine is anchored in the ground with 2 screws Machine head moves up and down when the boiler is retracted and extended 400 volt power supply robust and stable machine Tested for function
BTB TRO 8S 14U ISO 40 CNEL Transfer Machine (2017) Basic Information: Manufacturer: BTB Transfer SPA, Italy Serial Number: BB 881-2017 Year of Construction: 2017 Mass: 23,000 kg (23 tonnes) Machine Analysis: A high-precision rotary transfer machine A specialized type of automated manufacturing equipment used for high-volume production. Multi-station automated production Complex part processing with multiple operations Technical Specifications Stations: 8 machining stations Units: 14 machining units Control System: CNC-controlled (likely Siemens or Fanuc) Tooling Interface: ISO standard, facilitating compatibility with various tools Machining Capabilities: Simultaneous multi-axis operations, including drilling, milling, tapping, and turning Workpiece Handling: Automated loading and unloading systems Coolant System: Integrated high-pressure coolant delivery ISO 40 ...
20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll 10 Looms working and 10 looms are stopped Each loom can be tested before shipment.
Key data: 11200 , 14000 , 10500
5 nos. Sulzer 16ZAV40S HFO fired generator complete power plant available in China. Running hour : 10,000-11,000 hrs , may be converted to Dual Fuel Generator Speed at 500 RPM
weight of the machine ca.: 7.800 kg dimensions of the machine ca.: 3.380 x 3950 x 3015 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 1237; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 219
Spiral dough mixer with fixed stainless steel kettle for max. 120 kg dough. Vat cover with swivelling lid part, motor protection by overcurrent relay, electrical switching and control unit in the machine. Kneading process over time with 2 timers and synchronous motor, with automatic switching and switch-off. -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough- -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor -Locking by 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -8 kW 18A -Weight of the machine approx. 550 kg -Condition "very good" as good as new
Deck oven Miwe Condo CO 5.1208 Bakery oven Electric -5 floors each 120x80cm -each floor with Miwe FP control -each floor separately controllable -Top and bottom heat can be controlled separately -each floor with separate steam function -with proofing cabinet -with steam capacitor -with exhaust hood -Floor entrance height 17cm Internal height 16cm -Power: 49,1 kW -Year of construction 2010 -External dimensions Width: 150cm Depth without hood: 132cm with hood +40cm Height without hood: 238cm with hood +20cm
We sell a Sinmag spiral kneading machine incl. 3 tank cars (suitable for max. 120kg dough). The machine is in good bakery condition.
Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit
We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Meta The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.00 mm Drill hole Ø: approx. 11 mm Hole spacing (measurement center – center hole): approx. 90 mm Weight: 0.45 kg | Piece Your contact person in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Heidelberg Stitchmaster ST 100 Year of construction.: 2004 6 Investors 1x Turnaround feeder Trimmers with central groove Stacker
Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...
We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
spindle diameter: 130 mm x-travel: 6000 mm y-travel: 1750 mm z-travel: 600 mm w-axis: 800 mm spindle taper: SK 50 control: Siemens 8M type: 8M mm table surface area: 1500x1300 mm Table load: . kg turning speeds: . U/min spindle motor: . kW feed: . m/min chip conveyor: coolant: x-travel: mm total power requirement: . kW weight of the machine ca.: 75 t dimensions of the machine ca.: . m Tool magazine: 60 toolsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of ...
properties: Used belt conveyors curve 90° Transnorm Condition: Fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. motor 0,55Kw and side guide Feet to be ordered separately Color: Silver/ Yellow 1 pc in stock specifications: Dimensions of the belt conveyor curve 90° Type: 1600-105 Total outer width: 1,820 mm Total width inside: 750mm Total width incl., motor: 870mm Curve angle: approx. 90° degrees Belt width: 500mm Strap Type: Gripp Frame height: 220mm Material: Aluminum / Steel Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, Schraegfoerderer or telescopes for loading and unloading your goods, we ar ...
Kneader Diosna S 120 Plus Kneading Machine -with 1 timer -with stainless steel boiler and lifting arm -with flour dust cover -2 speeds slow and fast -Machine is mobile on castors with lock -400 volts
-Model UW-105-0 -Serial number: 86.131.711 -380 volts -13.7 kW Dimensions: 64x72x190cm (WxDxH)
General Manufacturer: Spinner Type: U5-1520 Year of Make: 2012 Control: Heidenhain TNC 620 Travel X/Y/Z: X 1,520 mm Y 520 mm Z 460 mm Travel C-axis: 360° B-axis travel: -5°(-50°)/+130° Rapid traverse: 48 m/min Spindle Spindle speed: 12,000 rpm Tool changer: 32-fold Work table Table load: Max. 300 kg Table dimensions: 720×540 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Portable Handwheel HR410 TNC620 Option "Software option 2" TNC620 Option "Software option 3" Glass scales in X/Y/Z Preparation for high-pressure flushing Preparation of the interface for Blum infrared probes
Pre-welding flange diameter DN 1200 pressure stage PN 6, stock goods, 2 pcs. new, primed, shipping possible worldwide, price per piece ex stock. Other dimensions can also be offered.
diameter: . mm Cutting (quantity): . 0 weight: . kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 1522; Engine: Caterpillar C7.1; Accessories: Control Panel, Double walled fuel lines, Keelcooled, Voltage (V): 24
Kubota V 1902, 4-cyl. Diesel engine, water-cooled, 1861 cc displacement, used machine, from 200 operating hours, several available. Other diesel engines 1-6 cyl., various makes: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Output from 4.5 – 100 kw, used, partly as good as new. Gasoline engines: 1-2 cylinders of 3-15 kw from B&S, Honda, Kohler, Robin, Wisconsin. Various radiators, starters, alternators and silencers in stock, various hydraulic pumps and hydraulic motors. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
Dough Kneader Spiral Kneader Diosna SP 120 F -Type: SP 120 F -with membrane keypad -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Stainless steel spiral and boiler -Boiler diameter 75cm -Boiler capacity approx. 180 litres -Machine mobile on castors with a swivel castor - 2 locks -with plastic flour dust cover -400 Volt Frequency 50 Hz -Weight of the machine approx. 550 kg -Condition "good"
This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty ...
PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW
DALEX 50Hz AC welding transformer 160kVA Rated Power: 160kVA/50%ED Voltage Prim.: 400V50Hz Voltage sec.: 6.25 to 9.75V in 4 steps Weight: 223kg
maximum number of results exceeded
please refine your search
