gt 128 1 used for sale

; Gross weight [kg]: 6185; Engine: Hyundai DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1090

; Gross weight [kg]: 2364; Engine: Hyundai P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

Reducer Concentric Reducer Concentric 160/90 SDR 1

THREE-PHASE INDUCTION MOTOR MANUFACTURER: EBERLE MODEL: B 130 - L8 No. 075/0106 15 HP 11KW 60 HZ 870 RPM INCOME: 90.0% COS 0.70 IP/IN 5.1 ISOL. F CAT. N REG SL IP 55 FS1.15 BEARING - INTERV. LUB - QT GREASE - TYPE OF GREASE LA 6311.03 20,000 HS 20 g POLYREX LOA 6311.03 20,000 HS 20 g MASS 134 KG

Model SC-120 Corn cutter provides maximum product recovery, high throughput, low maintenance and automatic corn removal from the cob at high speed. Each ear is placed on the feed through chain, tip end first. The stainless chain moves the ear of corn into the feed rolls. Two sets of feed rolls line the ear of corn up with the cutter head and move the earinto the cutter knives. The cutter knives are automatically openend for cutting by the feed roll gauging sytem. Kernels fall through the head and is discharged to a takeaway conveyor. A water spray is directed into the cuto-off corn area to minimize the starch build up.

ABB MOTORS 3 ~ ENGINE M2AA 112 M CT. FIP: 55 3GAA 112001 - HAD 27,145 Number: 9680260510002 V Hz R/min KW A 440 60 1725 4.6 8.5

Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm  ...

Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz

Handy hydraulic punching bracket with 70mm projection. Maximum punching capacity Ø24mm in 16mm steel. A double-acting hydraulic unit with a maximum printing capacity of 700bar. This new machine comes from a warehouse clean-up. Additional punching tools would be sold separately.

DEFUM WFM-100 boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of workpieces with complex geometry and high weight. All machining processes, i.e. drilling, milling, boring and thread cutting, are performed on a stable work table by means of a powerful spindle with a diameter of 100 mm. The WFM 100 horizontal boring machine weighs 11000 kg. Technical specifications of the DEFUM WFM-100 drilling and milling machine - feed in the X/Y/Z axis: 1200/1000/600 mm - work table dimensions (L x W): 1100 x 1100 mm - maximum workpiece weight: 3000 kg - maximum spindle rotational speed: 1600 rpm - spindle diameter: 100 mm - spindle drive power: 18.5 kW - dimensions (L x W x H): 4610 x 3620 x 3110 mm - weight of the DEFUM machine: 11000 kg

Wheel lathe Rafamet UBB - 112 , one side of the machine isn't working

Filter, for engine 28/32 Part number: 1613872000

Filter Parker Part number: HN2L-10CN

Filter Petrodiesel Part number: 60502-12S-0005

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2"  ...

Fixed bearing, for engine 28/32 Part number: 1403109-9

MANN Filter, for engine 28/32 Part number: CF 1000

Movable bearing, for engine 28/32 Part number: 1614971-6

2 Head Paper Drilling Machine

Spiral kneader Diosna SP 120 D Spiral kneading dough kneader from Diosna SP 120 D with solid stainless steel boiler for a maximum of 120 kg of dough.Kneading process over time with 2 timers, with automatic switching and shutdown.Trade-in and delivery on request. Type: SP 120 D mobile for max. 75kg flour or for max. 120kg dough with 2 automatic timers Spiral and boiler made of stainless material Boiler diameter 75cm Boiler capacity approx. 180 litres Machine can be driven on castors with a swivel castor Locking by 2 locks with plastic flour dust cover Stainless steel spiral and boiler 400 Volt frequency 50 Hz Weight of the machine approx. 550 kg Condition "good"

1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected

Stock number U2387-1 Used mixing station for liquids. Station consist of vertical stainless steel mixing tank with total volume 1300 l. Internal diameter 1170 mm x length of straight side of wall 1140 mm. Bottom elipsoidal, with central discharge outlet. Tank is mounted on three stainless steel legs, on tension cells. On side walls there are welded four baffles. Mixing is provided by homogenizing agitator by IKA (DE) model Turrax UTC TMP 150 / 2KT, driven directly by 11 kW, 2915 rpm, 380/660 V, 50 hz. Length of the shaft 900 mm x diameter of mixing die 150 mm. Agitator is mounted on stainless steel supporting frame. Discharge from tank is provided by sinusoidal stainless steel contact parts pump by Masosine Process Pumps model SP 25, working on pressure up to 15 bar. Working rotation up to 600 rpm. Pump is driven by 2.2 kW, 1400 rpm, 220-380 V, 50 hz. Working rotation of drive up to 2 ...

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

Process chiller / chiller air-cooled, Type: TAEevo Tech 602 P3-20 MTA S.p.A. TAEevo Tech 602P3-20 are compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, electronic expansion valve, buffer tank 500 ltr., built-in P3 circulation pump and winter package -20°C (condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 116 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 19.8 Available pump pressure (bar) 3.37 Ambient temperature °C 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 60.99 Max. current (A) 102.78 Starting Current Circuit (A) 218.51 Protection class: IP54 Dimensions: Length mm 3294, width mm 1255, height mm 2119, Weight kg 1773 Connection Rp 2" ...

Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

3 Chamber Press – Waste Press Strautmann MK 1100 used Features • Manufacturer: Strautmann • Type: MK 1100/3 • Condition: Used goods, see photos • Colour: Green • Dimensions: 3600 x 1000 x 2700 mm • Net weight: 2000 kg • Connection: 4 kW, 400 V, 50 Hz • Press force: 200 kN • Year of manufacture: 2000 Price € 4.900,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...

Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...

Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Reference ID: PP-53194 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 104-ER Year Built: 1996 Color:- Impression:- Working Hours: 64,000 Speed: 8,000 sheets/hour Max. Size: 1039 x 740 mm Min. Size: 399 x 350 mm Condition: Good Location: Europe Availability: - Machine Description Feeder & Infeed Non-stop (manual/automatic): Manual Non-stop infeed bars (mm): 18 Non-stop bars coating (Chrome/Teflon/Standard): Standard Non-stop bars equipped with air pressure (Y/N): No Non-stop bars with lateral shifting (Y/N): Yes Lateral register available (Y/N): No Register type (POWER/ACCU/LATERAL/MECHANICAL): n/a Register mark width (1 mm): n/a Reading from (Top/Bottom/Both): n/a Front margin – standard/light sensor: Yes Mechanical front margin (25, 60, n/a): 25 Upper transport belts on infeed (corrugated): No Detection sheet direct ...

Flake Ice Machine / Rotary Evaporator with Silo Manufacturer: MAJA Type: RVH 1500 CO2 The flake ice generators of the MAJA RVH series can be integrated into refrigeration concepts that are designed for environmental compatibility and sustainability. Specifications: Year of Make: 2019 Ice capacity approx. 1500 kg / 24h Dimensions of the entire facility: width 175 cm / depth 130 cm / height 230 cm Weight approx. 450 kg Electrical connection 3AC/50Hz/400V/PE0.28 kW Control: Maja Touch Panel (optional) Refrigerant required: R744 Function checked / machine ready for immediate use! Condition and accessories see original pictures! If you have any questions, email or call.

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...

Stock number: U2391 Used rotary tablet press by Killian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main compression force up to 65 kN. Machine has local control panel and electric cabinet with work recording computer and printer. Technical documentation included with machine. Toolings not included.

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Commercial dishwasher HOBART Model: UXT-A-SEF Type: UXT-10A/V, R Specifications: External dimensions WxDxH: 140 x 95 x 225 (242) cm Basket size WxD: 124 x 70 cm Insertion height: 86 cm Electrical connection: 400V 3NPE 50Hz 21.6kW Fuel tank capacity: 130 liters Water consumption: 7.5 litres/basket Program duration: 120/240/360 sec. and special programs Weight: 295kg Year of Make: 2019 Original price: EUR 50.722,- VISIOTRONIC control: One-button operation with remaining run indicator in combination with text and graphic display. SENSO-ACTIVE use of resources: The control system permanently monitors the ingress of dirt into the tank and adjusts the rinse volume individually and in real time to the degree of soiling. POWER wash: Guarantees the removal of the most stubborn dirt through increased washing pressure. CLIP-IN washing and rinsing arms: Both washing and ...

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

BUTTER CHURN EGLI CAPACITY TANK : 1700 L CREAM CAPACITY : 850 L BUTTER OUTPUT : 425KG

pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRODUCT DESCRIPTION MANUFACTURER: Westfalia TYPE: MSE 25-01-177 YEAR: 2011 CAPACITY: 2500 Lt/h MACHINE COMES WITH: Tools and instructions book.

8.10 Meters AR Racking Pallet Rack AR Racking pallet rack with a total length of 8100 mm, consisting of a base field and two attachment bays (2700 mm each). Each field has three levels (including floor space) with four trusses (2700 mm). Thrust protection and rear wall grilles ensure that your stored goods are securely held on traffic routes and in work areas 3 Euro pallets can be stored next to each other and 3 pallets (incl. floor space) on top of each other per field One field offers space for 9 Euro pallets Manufacturer: AR Racking Type: ARPA-S Total length: approx. 8100 mm Shelf height: 3500 mm Shelf depth: 1100 mm Clear field width: 2700 mm Pitch: 50 mm Number of storage levels: 3 (incl. floor storage space) Number of fields: 3 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 27 Year of manufacture: 2023 Stand The frames consist of two Om ...

Impressions=0 m, Condition= Good , Availability= 2025-11-03, Size Max 76 x 106 Size Min 450 x 450 mm cardboard thickness 250-2000 gr/m2 Max corrugated thickness 5 mm Speed 6000 sh/h Pressure 300 tonn

TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm

Machine Details Warehouse number 1105-03654 Machine Type Machining Center - Vertical Make ycm SUPERMAX Type wmc 1100 a Year of construction 1994 Control type CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1100 mm y-travel 600 mm z-travel 630 mm CNC control FANUC OM Table size 1200 x 600 mm Spindle holder ISO 40 bt Spindle speeds 45 - 8000 1/min Spindle drive motor 11 ( 30 min ) kW Tool changing device for 30 tools table load 1200 kg Projection 630 mm Operating voltage 380 V Rapid traverse speed 12 m/min Feed range 1 - 5000 mm/min Machine weight approx. 6.6 t Space requirement approx. 2.90 x 2.60 x 2.50 m Information - Control: FANUC o M - Coolant device MAGAZINE 30 COMPARTMENT DOUBLE ARM

DH Robotics RGI-100-22 Rotating Electric Gripper without Brake With the Rotary Electric Gripper-RGI-100-22-O you have precision and performance under control! Discover the exemplary performance of the Rotary Electric Gripper RGI-100-22, where precision meets performance. With a gripping force of 30 to 100 N, this gripper ensures a firm yet adaptable hold of your materials. Its IP40 device guarantees reliable operation in a wide range of environments. With a maximum payload of 1.5 kg, it is designed for versatility and strength. The 22mm stroke offers a wide range of motion, making it perfect for various applications. Despite its robust features, the gripper maintains a handy weight of only 1.4 kg, which ensures easy installation and operation. Improve your automation process with the RGI-100-22 and experience the future of gripping technology today. Item Attribute Weight (gri ...