129,510 used machines on RESALE, but how to find them? Machine Search
new rear light, incorrectly ordered, from stock
Stainless steel centrifugal pump Alfa Laval, type SOLTDC 2/140 SSS, 4,0 kW, used, price ex works
Bezner Siebmaschine | Flat screening machine type BSM-50/1750W reinforced version Screening machine especially for the use of mixed construction site waste (commercial waste, mixed construction waste) used, very good condition - Make: Bezner - Type: BSM-50/1750W - Year of construction: 1995 - Condition: very good condition (used) - Screening capacity: up to approx. 50 - 70 m³/h (for mixed construction waste (commercial waste, mixed construction waste)) - Screen area: approx. 6.0 m² (approx. 2.25 m² for D = 8 mm // approx. 2.25 m² for D = 25 mm // approx. 1.5 m² for D = 60 mm) - Fractions: 4 Crswvwqsw I E H Rsy Eog - Screen decks: 1 piece - Drawer side: up - Drive power: 5.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 7,800 kg - Machine colour: RAL 2001 red-orange Suitable for screening the following bulk materials, among others: - Constr ...
; Gross weight [kg]: 6600; Engine: Cummins KTAA19-G6A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 975
Unimog Mercedes - many more bodies/attachments could also be provided. Price ex works, in 2007 the Unimog was retyped.
I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.
Year of manufacture 2019, top condition, only approx. 300 hours Machine housing: solid stainless closed base plate Screw housing : stainless Working auger : stainless Feeder auger: stainless, horizontally extendable Lock nut: stainless Cutting device : included incl. cutting set for fresh meat and insertion rings Perforated disc diameter: 130 mm with main switch / 2 speed / push button Motor power: 12.5/15 KW / Voltage: 400V / 50Hz incl. the following additional equipment : +Safety cover for cutting set - +Separator device incl. SEP cutting set and Sep support cross with adjustment and discharge tube +Z-agitator: 1.5 KW (can only be used for FF), enlarged Hopper capacity approx. 355 I incl. machine elevation and safety step mech. Ejector (of the working screw) by means of lever on machine, microprocessor-controlled (PLC) Membrane keypad and control cabinet stainless st ...
An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional
An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional
Vötsch VTU 100/150 Heating and drying oven Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Rated current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weights: 780 kg Microprocessor-controlled temperature and program controllers Jumo Two-Point Controller Digital display of setpoint/actual value of temperature, plain text display Easy loading of the equipment floor via foldable drive-on ramp Dimensions Inside: (W x H x D) 1000 x 1500 x 1000 mm Outside: (W x H x D) 1840 x 2389 x 1450 mm More items - new and used - can be found in our shop! International shipping costs on request!
Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m
Prior sale reserved - errors possible Internal Reference Number: D-1143-2
Technical data for the footplate: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: Footplates, new Material colour: sendzimir galvanised Type: PNABG0018 f. Frame profile: 100 mm Material thickness: 8.00 mm Total width: 120 mm Total depth: 144 mm Height: 76 mm Number of drill holes: 03 pcs. Drill hole Ø: 13 mm Weight | Pcs.: 1.34 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...
CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...
High-pressure pumps are used to clean plants and apparatus, allowing containers, filter cloths from filter presses and pipelines to be cleaned. Name: High Pressure Pump Used Manufacturer: Uraca Type: KD613 Year of construction: 1991 Material: Normal steel Drive motor: 54 kW Dimensions: L 1800 x W 1000 x H 750 mm Empty weight: approx. 2000 kg Speed: 468 rpm Flow rate: 270 liters / min. Condition: Used Tech. Documentation: Yes Price: On request
; Gross weight [kg]: 5259; Engine: Volvo TWD1644GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Inclucing: battery charger and coolant heater; Water Tank Volume [l]: 897
; Gross weight [kg]: 17500; Engine: Cummins KTA50-GS8; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1000
; Gross weight [kg]: 11430; Engine: Perkins 4008TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1460
Complete the accessory package for your extraction / extraction system Hoses, sockets, flex arm and suction nozzle have always been part of our standard range. From now on we complete this package with the hose feedthrough Available now: Hose feedthrough machine wall for suction Dimensions: 150 x 150 mm Ø 76 nozzles on both sides Article-No. MA-201150
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
Key data: 176 KW, 220 kVA, 230 V
Generator Set Specifications: Model No.: EQ-H22060 Emergency power output: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Hyundai Engine Model: DP054CC Charging: Turbocharging & Intercooler Fuel System: In-line Injection Regulator Type: Mechanical Alternator Specifications: Alternator Brand: WEG Alternator Model: AG10-250SI10AI Generator dimensions (closed): Length: 3300 mm Width: 1220 mm Height: 2000 mm Weight open: 2250 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine WEG Alternator (Model: AG10-250SI10AI) ABB Circuit Breakers Protection system in manual operation Flexible oil pipes and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically painted, welded steel chassis Fuel tank housed in the chassis Silencer in industrial d ...
Machine Details Warehouse number 1105-03571 Machine Type Machining Center - Vertical HARTFORD brand Type VMC 1020 Year of construction 1999 Control type CNC Control FANUC OMD Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight base EX WORK Technical details x-travel 1020 mm y-travel 510 mm z-travel 510 mm Table clamping surface 1200 x 600 mm Speed range - milling 8000 rpm Control FANUC OMD Drive power - Milling spindle 11 kW Tool holder BT 40 Number of tool magazine slots 24 stations Feed range 1 - 10000 mm/min Rapid traverses: 20 m/min Total power requirement 25 kW Machine weight approx. 5500 kg Space requirement approx. 2300x2200x2600 mm Accessories Full protection - fairing Complete machine documentation Information very nice MACHINE CONTROL FANUC O MD SPINDLE BT 40 8000 RPM
CSAT printing system for blister film coloured printing. Unit is suitable for printing counterfeit-proof solutions for pharmaceutical packaging. Resolution: 1,200 dpi, output: 0.5 to 20 m/min.
WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...
Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp
- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)
Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm
Hobart Dishwasher FXS-10A Year: 2014 External dimensions: 60x60x126cm
aschinella details Warehouse number 1105-03375 Machine type Milling machine - Universal CmE brand Type FC 1100 Year of construction 1991 Control type NC Storage location FRANCE Country of origin spain Delivery time immediately Freight base from stock Technical details x-travel 1100 mm y-travel 700 mm z-travel 500 mm Receiving cone of the main spindle 40 SK Motor power 10.6 kW Table clamping surface 1400 x 450 mm Speed 40 - 1800 rpm Dimensions L-W-H 2.4 x 2.15 x 2.1 mm Machine weight approx., 3800 kg Information Equipment: - Heidenhain - Control model TNC 124 - Universal milling head "Huron" design - 2 counter holders for horizontal milling - autom. Tool clamping - Lighting - Central lubrication
Bread cutter Model: Varia Pro 1000 easy operation 200 discs/min Cutting width/bread length 490mm Circular knife machine manual operation Disc thickness adjustable from 4 - 30 mm Dimensions: 990 x 746 x 1080 mm, WxDxH Bread dimensions max: 490 x 340 x 160 mm L x D x H DGUV V3 called Connection 230V,1 kW New machine with 24 months warranty Option: - Stainless steel version - Automatic claw - Bag holder - Special colours - front bread tray Visit our large bakery machinery exhibition!
Breast pump stainless steel with housing, manufacturer MKT Malmi, vario gearbox Lenze, electric motor - Elektrokovina T 90L4, power 1.5 kW/220/380 V, special feature: Vario gearbox Lenze
SPECIFICATIONS: Mobile welding fume extraction with suction arm for welding fumes Installed capacity KW: 1.5
Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.
front mowers; Intermediate axle mower John Deere tractor for 2000 PTO
High-performance flue gas fan very good condition closed wing for high pressure 15kW V-belt transmissions
maximum number of results exceeded
please refine your search
