129,480 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 2950; Engine: Perkins 1706A-E93TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 385
roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...
Centrifugal pump Manufacturer: Hilge Type: Hygia SII/10B No.: HS2 10B 69 4553 Power: 3 hp with spare part LBH: 650 x 400 x 350 mm
- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg
; Gross weight [kg]: 6934; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1307
; Power [PS]: 598; Gross weight [kg]: 4860; Engine: Volvo TAD1346GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 900
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...
- Pressing force: 1000 kN pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1250 kg
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...
saw blade diameter: 1250 mm cutting diameter: 380 mm cutting range: 480x320 mm motor speeds:: 3000 U/min feed speeds: 1000 mm/min main drive motor: 112 kW chip conveyor: cutting speed: 10-265 m/min total power requirement: 125 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
220 V, 9.6 A, 2000 W MAXIMUM CHAMFER LENGTHS MAXIMUM CHAMFER LENGTH STEEL 400 N/MM² 15 mm MAXIMUM CHAMFER LENGTH STEEL 600 N/MM² 9 mm MAXIMUM CHAMFER LENGTH STEEL 800 N/MM² 6 mm RADII SMALLEST RADIUS 55 mm GENERAL WORKING SPEED 2 m/min STROKE RATE AT NOMINAL LOAD 370 1/min RATED POWER 2600 W SHEET THICKNESS 4 mm - 160 mm WEIGHT WEIGHT WITH HANDLE, WITHOUT CABLE 16.5 kg As good as new. Condition
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.
2 cloth press 1,0 m cloth width capacity: up to max. 4 t with top fruit
The scope of delivery includes: 01x Welding grate, used Material colour: hot-dip galvanised Total depth: approx. 2,460 mm (bearing rod direction) Overall width: approx. 1,130 mm (cross bar direction) Lifting rod: TS30/2.00 Frame height: approx. 30 mm Mesh size: approx. 35 x 40 mm Weight / piece: approx. 49.61 kg Internal designation: GR-126 Note: - 2 L-brackets welded on each side as a lock - The grating can be damaged, Have scratches, dents. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
used
Used first-class renovated extrusion recycling plant EREMA for the processing of polyethylene and polypropylene. Capacity of approx. 1,100 kg/h. WITHOUT DEGASSING. Processing of only CLEAN material; without printing ink. Auch Folien + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827
We offer formwork Peri Trio 270 x 120, 14 pieces with a 65% discount on a new value of €1,786.00/pc = special net price €625.10/pc. Frame top used condition, cleaned, primed and painted with zinc phosphate coating. The formwork is completely overhauled, with top used original Peri Finply formlining, checked and sorted. Sold individually, subject to sale! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Head type: 3-SH/60-125-PE/T (DeCo) Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm
This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, built in 2023. For the following Index series: Index H and I can also be used for DUO devices or individual devices. This hood not only binds escaping fumes, but also eliminates odors and smoke. You don't need an exhaust air path to the outside. An LED lamp automatically shows you when you need to change the filter. This version has stainless steel lamella filters, as well as a pre-filter mat behind it. In this way, the activated carbon filter, which is located in the hood as the centerpiece, is protected from too rapid contamination and offers optimal functionality. This Plus condensation hood can be used optimally in the front area, in closed rooms or for show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be retrofitted without much effort. The hood has been checked in our i ...
Head type: 2-BKD-51-125 (A 70) Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
Electric motor ALMO MTA 132 SX2 recon Ball bearings renewed from the rotor. Seals renewed. The engine has slight traces of smoke but is in an overhauled and installable condition. Data from the engine see pictures.
Bobst SP 1650 E Max.Size: 11501650mm Min.Size: 570850mm Max Speed: 4500sh/h Year 1970 In good production condition.
Bobst SP 130 E Year 1985 Max.Size: 920x1300mm Min.Size: 450x580mm Max Speed: 7000sh/h Max. Cutting force: 500T center line Immediately available.
used
Extrusion recycling machine EREMA 1514T for processing of CLEAN unprinted polyethylene and polypropylene, WITHOUT DEGASSING, no converting of printed materials. capacity up to approx. 1.100 kg/hr. The machine is refurbiushed in ecellent condition. Auch Folien + Technik e. Kfm. D-73723 Esslingen phone +0049 1577 5329827
PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T
press capacity: 148 to material: Hartmetallstangen quality: Extrusionspressvorgang 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures ...
This is an UltraVent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, built in 2024. For the following Index series: Index H and I can also be used for DUO devices or individual devices. This hood not only binds escaping fumes, but also eliminates odors and smoke. You don't need an exhaust air path to the outside. An LED lamp automatically shows you when you need to change the filter. This version has stainless steel lamella filters, as well as a pre-filter mat behind it. For example, the activated carbon filter (newly installed) located in the hood as the heart is protected from too fast contamination and offers optimal functionality. This Plus condensation hood can be used optimally in the front area, in closed rooms or for show cooking. Retrofitting and installation on the Rational SCC WE 61/101 can be retrofitted without much effort. The hood has been checked in our i ...
GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...
SPECIAL EXECUTION FOR CARBON OR TECHNICAL FABRICS ! WEAVING MC WITH CREEL & SUCTION UNIT , SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING TYPE : G6200 S 190 N8 SP - SPECIAL EXECUTION FOR CARBON OR TECHICAL FABRIC WEAVING 8 COLOR, WITH STAUBLI DOBBY 2617 WW : 190CM SERIAL NO. : 1056 ACCESSORIES : CREEL WITH 192 POSITIONS , BY CMG , YOC 2010 DUST SUCTION UNIT 4 FRAMES 4 PREWINDERS IRO ORION BATCHING MOTION
Reference Num.: 3604 Brand: Horizon Type: Collator AC-1200 Available: directly Status: Not in production Location: Deutschland
Key data: 160 KW, 200 kVA, 400 V
Generator Set Specifications: Model: EQ-I200160 Primary power: 200 kVA / 160 kW Standby power: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TM7 Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3150 mm Width: 1056 mm Height: 1900 mm Weight Open: 2000 kg (Note: Here it says "Weight Open" despite the heading "Dimensions of the generator set (Closed)". I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil ...
total power requirement: 38 kW degree: 500 Grad weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Burton 11 A knotting machine; good condition; cleaned and tested; engine overhauled; new frequency converter; with accessories. Knot machine Burton 11 A; good condition; clenaed and checked; motor rebuilt; new frequency converter; with accessories.
Prism jaw, 125mm wide for clamping round parts, type 1, D4-20mm, and 2x D6-40mm, Type 2, D4-20mm and D9-62mm
Key data: 16 KW, 20 kVA, 230 V
Made in the EU 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-P2016 Prime Rating: 20 kVA / 16 kW Standby Rating: 22 kVA / 17.6 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 404A-22G1 Bore x Stroke (mm): 88 x 110 Displacement (L): 2,216 Compression Ratio: 23.3:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1600 mm Width: 650 mm Height: 1250 mm Weight open: 560 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-co ...
SABROE CHILLPAC 106E Brand:SABROE Type:CHILLPAC 106E Stock number:M21-4529 Cooling capacity:538 kW Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:27 kg Voltage:400 Volts Motor power:132 kW Dimensions:3200 x 1000 x 2000 mm Weight:4,045 kg Year:2007 Number in stock:1 piece(s) Price:Quotation request Description: Very nice water-cooled ammonia Sabroe chiller with a Sabroe piston compressor, a 132kW e-motor and a Unisab II controller. Mentioned capacity at a water temperature of +12/7°C (in/out) and a condenser water temperature of +30/35°C (in/out). Visit also our website: used-refrigeration
Key data: 80 KW, 100 kVA, 230 V
Made in the EU 30 months warranty On hand! Only 2 pieces available Power Generator Specifications: Model No.: EQ-I10080 Prime Rating: 100 kVA / 80 kW Standby Rating: 109 kVA / 87 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine brand: Iveco Engine Model: NEF45TM2A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression Ratio: 17.5:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions unit (closed): Length: 2430 mm Width: 1056 mm Height: 1700 mm Weight: 1422 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-coated, weld ...
CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead
used
GEMA GP 100 semi-automatic pallet wrapping machine was built in 2012 in Poland by GEMA sp. z o. o. This highly efficient machine is an indispensable tool in various types of warehouses and logistics centres. This is because it makes it possible to wrap loads with a maximum weight of 1500 kg in stretch film, increasing their safety and stability during transport. The process is performed by the machine semi-automatically. The GEMA pallet wrapping machine weighs 500 kg. We have two of these machines for sale. The price included in this advertisement is for one unit. Technical specifications of the GEMA GP 100 stretch wrapping machine - maximum wrapping height: 2200 mm - maximum load diagonal: 1650 mm - maximum load weight: 1500 kg - maximum film roll diameter: 270 mm - film thickness: 7-30 μm - rotary table height: 70 mm - rotary table positioning accuracy (with 1000 kg load) ...
The diesel forklift with a load capacity of 10.0 tons (10,000 kg, 22,046 lbs) has been specially developed for the transport of particularly heavy loads. Equipped with a modern Cummins diesel engine, hydrostatic steering, pneumatic tires and a closed hydraulic system, it offers the highest performance and efficiency. For special requirements, we also have electric forklifts for zero-emission solutions, gas forklifts for versatile applications and four-wheel forklifts that are great for difficult off-road conditions. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 10,000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 175 x 80 mm - Total weight: 12,900 kg ...
maximum number of results exceeded
please refine your search
