gt 128 1 used for sale

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 5952; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1082

Control to clients specification., Control panel in pictures can differ from stock unit., Stock is DSE 8620 MK2; Gross weight [kg]: 17260; Engine: Cummins KTA50-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1640

Sterile/Aseptic Containers Manufacturer : Vogelbusch Capacity: 18100 liters Technical specifications : Cylindrical, upright stainless steel tank with double jacket Weight 3950 kg Loading room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Material 1.4435 Boiler room: Pressure- and vacuum-resistant +4/-1 bar Test pressure 6.5 bar Operating temperature 145 °C Capacity 230 litres Material 1.4404/316 l/ the container was used in the pharmaceutical industry for sterile water Insulating sheet outside is screwed would have to be partially replaced, since the container is insulated with glass wool, the sheet was deformed during transport. Equipment: Manhole Hand hole DN 200 Cip nozzle DN 50 2x sight glass Rupture disc Cooling/heating jacket inlet and outlet DN 25 GMP Various supports Manhole: DN 500 Documents: ...

power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kW volt: 0 V ampere: 0 A new motor with options G45 und K42 Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

This Rational Ultra Vent hood for Rational combi steamers, including connection kit, fits the combi steamers CMP, SCC 61/101 Electric from year of construction 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultra Vent hood is € 3,696 net. The price quoted is net, plus 19% VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or mo ...

Panel gluing line Drawing number: PVP-00-00-00-1165 ELECTRO-OIL-HYDRAULIC DESIGN with electric heating plates Clamping size: 3,000 x 1,300 mm Maximum wood thickness: 70 mm Minimum wood thickness: 4 mm Fed with: 10 pcs hydraulic cylinders ø35 x 95 mm stroke (Press force max. at 200 bar = 1,900 daN) with fold-up thrust pieces for narrow Workpieces 3 hydraulic cylinders ø60 x 250 mm stroke for operating the upper heating plate (Press force max. at 160 bar = 5,000 daN) 1 pc. pressure control valve for the upper heating plate 1 pc. pressure control valve for the press cylinders 1 infinitely adjustable timer for automatic opening of both the heating plate and also the hydraulic cylinder Technical data of the heating plates: ELKOM - Electric heating plate made of aluminium in sandwich structure Maximum usable temperature: 120°C Surface hard anodized Power consumption: ...

The vertical shelving system is a well-thought-out storage solution for the upright storage of long goods such as roof battens, strips, installation pipes or beams. It was specially developed for commercial as well as private use and offers a particularly space-saving alternative to classic horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or the self-service area in retail. The scope of delivery includes: 01x Vertical racking, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Projection: approx. 500 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with a ...

turning diameter over slide rest: 940 mm turning length: 10000 mm turning diameter: 1250 mm spindle diameter: 105 mm speed: 1,6 - 315 (x24) m/min voltage: 380 V total power requirement: 75 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw faceplate Power compound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture: 2021, Connector size: 6 Perrot Cardan, Technical condition: very good, Visual appearance: very good, Damages: none, Price: On request, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Friday between 7:00 a.m. and 6:00 p.m. Call, text, or email us, whichever you prefer., , Want to visit us? Yes, please!, , Our doors are open Monday through Friday from 7:00 a.m. to 4:00 p.m. On Saturdays, you are welcome by appointment.

Sheet Metal Shear, Power Shear, Hydraulic Shear, Strojarne Piesok CNTA 3130, Used Equipment Cutting Length: 3150 mm Maximum Sheet Thickness: 16 mm Dimensions (L x H x W): 4.15 x 2.65 x 2.65 m (measured as a whole, without disassembly) Weight: 16,300 kg Manufacturer: Strojarne Piesok Model: CNTA 3130/16A Electrical Data: 400 V; 50 Hz; 33 kVA

Side Channel Vacuum Pump, Side Channel Blower, Vacuum Pump, Busch Samos Si 1150 E1 Manufacturer: Busch Type: Samos SI 1150 E1 Condition: New, Tested Weight: 360 kg Year: 2020 Overall dimension : 2100 x 1360 x 1000 mm Housed in a soundproof enclosure, made of stainless steel. Pump Performance: Max. differential vacuum: -185 mbar, 828 mbar Max. differential pressure: +155 mbar, 1168 mbar Airflow rate: 1200 m?/h Electrical Data: 11/12.6 kW, 400 V, 50/60 Hz, 26-46 A

Simatic Multi Panel Touch Siemens Siemens MP 277 10 inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 pieces Condition: used Price per piece Width outside: approx. 330 mm Depth outside: approx. 275 mm Width inside: approx. 305 mm Depth inside: approx. 245 mm Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to make you an individual offer or advise you on the design or installation questions. Simply let us know your ...

Reference ID PP-47933 Category Flexo Printer Manufacturer Bobst Model 160 A-Matic and Flexo 160 Year Built 1994 Color 2 Speed 6500 sheets/h Max. size 1,600 x 1,100 mm Min. size 600 x 520 mm Condition Good Location Europe Availability - Machine Description BOBST 160 A-MATIC CUTTING MACHINE Sheet sizes: - Maximum cutting size: 1,600 x 1,100 mm - Minimum cutting size: 600 x 520 mm Cutting size with front waste: - Maximum cutting size: 1,600 x 1,075 mm - Minimum cutting size: 580 x 492 mm - Gripper margin adjustable: 15 +/- 3 mm - Thickness of corrugated board up to 9mm - Thickness of solid board from 1mm - Cutting force, maximum: (400 tons) 4MN - Production speed: up to 6.500 sheets per hour Construction year: 1994 Production country: SWITZERLAND Voltage: 480 V Frequency: 50 Hz 2 COLORS UNIT BOBST FLEXO 160 Sheet sizes: - Maximum cutting size: 1,600 x 1, ...

length: 300 mm width: 150 mm height: 90 mm voltage: 24 V weight of the machine ca.: t dimensions of the machine ca.: m Power connection 24V / 2,8 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 of used motion controller, make Mayr / Pilz, type Primo Compact P21.004.0, part number 0802930, version: 1.7.3.1 (592). Came from operational ZVT packaging machine.

Key data: 160 KW, 200 kVA, 400 V

MODEL: EQ-VP200160 GENERATOR ENGINE: Volvo Penta TAD732GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 200(kVA) / 160(kW) CYLINDERS: 6 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1700kg DIMENSIONS L/W/HEIGHT (MM): 252010601530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight pr ...

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

continuous grilling line suitable for frying, cooking or browning electric heating 400 kW 510A, 3 x 400V, 50Hz with bottom and top band : bottom and top contact frying Overall dimensions (L x W x H) : ± 7,700 x 2,300 x 2,400 mm Cooking time: from 10 sec. to 5 min. Useful length 6,000 mm Track width 1,060 mm max 260 degrees product height 250 mm Air: 6 bar - 100 l/min Water: 65 degrees - 2 bar - 30 l /min variable frying height infinitely variable speed pneumatically controlled tape Siemens PLC control with belt washing system

The RB135 and RB 150 are wheeled excavators engineered for high-efficiency digging and utility work in urban and semi-urban environments. Operating Weight: 15,000 kg or 13,500 kg Engine Options: Kubota V5009-T or Yuchai YC4D115 (EURO V) Power Output: Up to 157 HP (Kubota) or Up to 115 HP (Yuchai) Max Torque: Approx. 600 Nm at 1500 rpm (Kubota) or Approx. 380 Nm at 1700–2000 rpm (Yuchai) Displacement: 5.0 L (Kubota) / 4.2 L (Yuchai) Hydraulic Pump: Kawasaki PNM variable axial piston pump Hydraulic Valve: Parker high-performance control valve Swing Engine: Sunjin (South Korea) Tires: 9.00-20 industrial-grade tires Controls: Hydraulic-electric joysticks Cabin: Enclosed with heating, ventilation, and ergonomic seating Hydraulic Flow: High-capacity system for powerful attachments Max Travel Speed: Up to 30 km/h Max Digging Depth: Approx. 4,750 mm (d ...

Centrifugal pump Manufacturer: Siemen & Hinsch Type: AKHE 1202 Item #: BN 08424 Power: 1.75/0.8 kW LBH: 880 x 500 x 1050 mm 2 copies in stock

Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.

1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KR (control unit right), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.

grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steady Ø 145 mm

Steady Ø 195 mm

1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KL (control unit left), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: ICEM 402 total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The GB 180 crawler excavator is engineered for serious excavation, lifting, and heavy-duty operations. Operating Weight: 18,000 kg Engine: Cummins QSF3.8 (EURO-compliant) Power Output: 93 kW (125 HP) at 2200 rpm Hydraulic Pump: Hengli high-pressure hydraulic pump Control Valves: Husco precision control valves Swing Engine: Eaton or Sunjin (Korea) Traveling Motor: Eaton or PMP Hydraulic System Pressure: 28 MPa Bucket Capacity: 0.8 m³ Bucket Digging Force: 98 kN Arm Digging Force: 68 kN Swing Speed: 0–12 rpm Travel Speed: 2.8–4.2 km/h Gradeability: 30° Overall Length: 8,540 mm Overall Width: 2,720 mm Overall Height: 2,920 mm Undercarriage Width: 2,720 mm Ground clearance: 480 mm Track Width: 600 mm Maximum Digging Radius: 8,985 mm Maximum Digging Depth: 5,975 mm Maximum Digging Height: 9,430 mm Maximum Dumping He ...

spindle diameter: 100 mm x-travel: 1200 mm y-travel: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 5,6x3,4x3,x7 m Brand: Femco Type: WBT-100SR2 CNC brand: Mitsubishi CNC model: Meldas C3 Year of make: 1995-05 Facing support Table length: 1.440 mm Table width: 1.600 mm Spindle diameter: 100 mm ø Machine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mm incl. right-angle milling head type Huron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GERA Bottle Washing Machine – Arcade GEL 6 RV1-VL 362/110-30 (Year 2010) High-capacity industrial bottle washing machine designed for efficient cleaning of returnable PET and glass bottles in beverage production lines. The GERA Arcade GEL 6 RV1-VL 362/110-30 provides reliable multi-zone washing performance and high throughput, making it ideal for breweries, soft drink producers, and mineral water bottlers. General Information - Manufacturer: GERA - Model: Arcade GEL 6 RV1-VL 362/110-30 - Article Number: 1334 - Year of Manufacture: 2010 - Operating Hours: approx. 35,000 h - Condition: Excellent used condition, regularly serviced Technical Specifications - Production Capacity: approx. 30,000 bottles per hour (1.0 L format) - Control Range: 13,200 – 36,300 bottles per hour - Cell Pitch: 110 mm - Bottle Cells per Row: 30 - Total Bottle Cells: 7,860 Washing System  ...

spindle diameter: 160 mm x-travel: 15000 mm y-travel: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 560 mm turning diameter over slide rest: 355 mm turning length: 1500 mm spindle bore: 80 mm spindle turning speed range: 25 - 1600 U/min turning dia. in gap: 785 mm metric threading: 0,2 - 14 mm thread - inch: 2 - 112 inch. thread - module: 34 / 0,1 - 7 mm Whitworth-thread: 60 / 2 - 112 TPI adjustment of the upper slide: 140 mm dia. of quill: 130 mm quill stroke: 120 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 1,20 x 1,5 m A comprehensive range of quality centre lathes characterised by wide versatility,high accuracy and extremely rigid construction. The machines are well equipped with a multi-fix quick change tool post and 2-axis Newall digital readout fitted as standard and a variable speed option is available. Huvema lathes fully conform to CE regulations. Also available in: 1,5m 3 jaw chuck 4 jaw  ...

; Gross weight [kg]: 14470; Engine: Caterpillar 3516B; Accessories: Control Panel, Caterpillar 3516B Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

: 0554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1020 mm saw band length: 9500 mm cutting width: mm Control: total power requirement: 7,5 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 4500 x 1700 x 2750 mm Brand: BMSY Type: 1020C Year of make: 2019 Capacity round 90º: 1.020 mm ø Capacity square 90º: 1.020 mm Capacity rectangular 90º: 1.020 x 1.020 mm Mitre: 45 ° Working height: 535 mm Saw blade dimension: 9.500 x 54 x 1,6 mm Saw motor: 7,5 kW Machine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mm Machine weight: 6.950 kg Clamp: 1 x 45 ° adjustable Hydraulic clamping including top clamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine DECKEL MAHO DMG 125

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

1000 litre bottom flap mixer with ploughshares 3 kw-67 rpm Chain drive

As good as new measuring frame with X-ray radiation for basis weight measurement on web fabrics up to a maximum width of 1000 mm. YOC 2014, approx. 2 ́100 operating hours, fully functional X-Ray-Gauge in good condition, for meassuring coatings or material weights up to max. 1000 mm widht. YOC 2014, about 2 ́100 running hours, fully functionable

; Power [PS]: 272; Gross weight [kg]: 2800; Engine: Volvo TAD841GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 400