gt 128 1 used for sale

Henkellikator COMAG Power 100 + 100 Pack/min The machine is double lane

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CV-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Storage tanks 19.160 liter outside marbled for wine, water, fruit juice, schnapps UNI-NIED Measurement and Weight: Total Height: 4600 mm Cyl. Height: 3600 mm Diameter: 1650 mm Weight: kg Material: V2A Surface: Outside marbled, inside 2B=IIIC Upper body: With dished bottom With thread connection Cylinder tank: With 1 manhole With zapf clape With level indicator with bar and scale Lower bottom: With dished bottom With outlet pipe pulled forward with butterfly valve With 6 feet Can be combined with 10.600 liter storage tanks (cat-no. EUBA18-0047).

all stainless steel max. load 1.000 kg (depending on the product) with new control Variotronic with new vacuum pump Busch 63m³ 3 speed engine : 1 / 2,8 / 3,4 rp/min dimensions (l x dpt x h) : ± 2.080 x 1.560 x 1.920 mm

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115 Delivery time: 10 working days after advanced payment

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.

NEW JOB CENTER! 480 HOURS TO POWER ON! COURSE AXIS X MM 1,000 COURSE ASSE Y MM 550 COURSE ASSE Z MM 500 TAVOLA DIMENSIONS MM 1.100x502 TAVOLA PLAN: 130-630 MM MAXIMUM LOAD ALLOWED: 700 KG ATTACK: BT40 GIRI/MIN VELOCITY SPEED 12,000 TOOL WAREHOUSE: 24 FANUC CONTROL 0i-MF COMPLETE OF TAVOLA 4/5th ASSE LEHMANN SOO EDITION 3

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Graule ZS 170NF Cutting and miter circular saws Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 430 mm (at 90°) Cutting height 170 mm (at 90°) Miter range: horizontal 45°-90°-25° Miter range: vertical 90°-45° (left) Saw blade s. 420 mm Suction nozzle 100 mm Weight 120 kg

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Stock# UG6276 Used vertical disc agitator/dissolver by Test SA (PL) type MP-11/1000Ex. Machine can work on 1000 l mixing pans and is equipped with disc agitator. Driven by motor 11 kW, 1440 rpm. Working rotation of agitator adjusted in range from 0-1000 rpm. Mechanical rising and lowering of agitator up to height 1250 mm. Dimensions: H 3180 mm x W 800 mm x L 1200 mm. Ex proof design - ExII2GcIIBT3. Includes technical documentation. New 2014. Mixing pan not included.

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm

Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.

S. No.: 2802048 M.No.112-PM-1 Bind Machine Plastic Comb Binder Model 16-DB s.- No: 2831384

Dear's Sale, used 2 complete engine Wartsila 12V32 Also, cover, piston, liner, conrod new/used, fuel pump, 12cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

Scale with conveyor belt Brand Sartorius Built in 2006 Type: WM6FDP-1000Q Up to 6 kg Conveyor belt speed: 15-36 m/min Bandwidth: 300mm - Calculation and display of weight values (RS-232C) - 100 product storage - Fixed weight values in dynam. Operation - TCP | IP, RS-422 and RS-485 can be used via external cartridges

For sale a used milling head of a Gleason Genesis 130 H

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CV-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Storage Tank / Flat Bottom Tank with Outlet Discharge 20.100 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge year: 1983 manufacturer: Defrancheschi Measurements: Width: 1780 mm Depth: 3700 mm Height: 4000 mm weight: approx.. 1,5 tons

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-110 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

MARINE GENERATOR SET Mitsubishi STAMFORD ALTERNATOR 295 KVA / 1500 RPM

DAEWOO/DOOSAN MARINE ENGINE V 158 TI V type, direct- injection, water cooled with wet turbo charger & inter-cooler

REINTJES MARINE GEARBOX - WAV 550 B - 5.158:1

Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-C1-CVE-185 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Boiler lifting tipper Diosna Model: HK 115 For planetary boilers Stainless steel 2 tipping heights DGUV V3 tested Y.O.M. 2010 Device mobile with fixed device Connection 400V, 16A-CEE plug Used machine inawhichandy and tested with 6 months warranty

1 pcs videojet inkjet printer untested, sale as spare dispense partr no nice optical condition 170i Excel

Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

PAGO 15/120E-x side labeler from 2011 Label height: 120mm Can be used for many purposes such as; carton labeling, adjusted to label bottles and other products Attached with a Thermic Transfer printing module Delivered with documentation Condition: good Dimensions: 650mm x 420mm & 570mm (LxW&H)

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

optional with 2 to 10 stainless steel boilers with pliers lock with control cabinet Boiler capacity approx. 190 litres for max. 120kg dough or for a maximum of 75 kg flour with Eaton PLC control Machine is in very good condition

SKF pendulum ball bearing 11206 with steel cage

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

used Rheon Free Divider VX 111 from 1998. With a long spout tape and a large funnel. We will be happy to send you further pictures and information on a request for comment. Stainless steel cladding mobile on wheels Flour bestuber digital control 380V - 50Hz - 3.5A Dimensions: Height: 180 cm Width: 445 cm Depth: 105 cm

TRUMPF TruPunch 3000-1300 (S11) punching machine was built in Germany in 2013. The reliable machine with extensive equipment and modern components offers its user unparalleled precision and accuracy in machining both thick and thin sheet metal. In addition to standard punching and marking, the punching machine also allows fast grooving, surface embossing, forming and chipless threading in stainless steel, structural steel and aluminium. On the machine’s sturdy and welded C” shaped structure, sits a specially designed brush table with integrated balls, designed to facilitate the loading and unloading of workpieces. The use of this type of table prevents scratches and nicks from appearing on the surface of the sheet, which results in a significant increase in the quality of the machining. During the entire production process, the sheet is held rigidly by hydraulic clamps fixed to th ...

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system