gt 128 1 used for sale

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

Pinion Drwaing No. 14272 - 167 C1 z=20

Pinion Drawing No. 14821- 167 C9 z = 23

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Semi-automatic/hydraulic Hacksaw Manufacturer: machine tool factory Silistra Type: OH 163.01 Serial No.: 970 Year of construction: 1972 Technical data: E supply: 380 V, plug 16 A

Break

Fessmann cooking and smoke system Turbomat T 1900, 1 trolley smokehouse, gas powered, cooking, baking, smoking, with cooling battery, DP 11 control, smoke generator RZ 325, measurements smoke trolley: 168 × 91 × 80 cm (h/w/d), smoke stick length 90 cm. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Working width: 1040 mm sheet thickness: 12 mm rear gauge: hand up to 500 mm power: 380 V, 11 kW space: 2500 x 2150 x 1900 mm weight: 4100 kg

Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

Tip height: 300 mm centre distance: 1500 mm gr. Turning diameter over bed: 625 mm spindle bore: 105 mm spindle retainer: Gr. 8 mm taper of tailstock Quill: 5 MK spindle speed: 6.6-2000 RPM elect. Supply: 400 V, 15 kW space: 4400 x 2050 x 1820 mm weight: 5200 kg

Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm

Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...

New machine Stainless steel model 24-month warranty Benefits: + mobile machine, with locking wheels + completely made of stainless steel + Manufacture and preparation of burnt dough, baking cream, chocolate, fondant, fruit jam, coating, filling, as well as for any product that requires uniform heating and mixing + Thermal oil circulates in the double tank wall, which is designed for safe and easy use + Triple wall for optimal thermal insulation + with side and floor wipers + electronic thermostat for adjusting the cooking temperature + with timer + manual / automatic operation possible + digital temperature display + Boiler is simply tilted over crank wheel for emptying (optional: with outlet valve) + two working speeds + Safety switch in case of over-switching + fast spare parts supply within 1-2 business days SPECIAL accessories, optionally available at an additi ...

Drilling capacity in steel/GG: 50/60 mm spindle retainer: 5 MK projection: 400 mm table size: 700 x 600 mm Quill stroke: 275 mm spindle speeds: 32-1030 rpm feeds: 4: 0.1 ? 0.4 mm drive motor: 380 V, 2.2/3.7 kW space: 700 x 1200 x 2700 mm weight: 1240 kg

Make: Küba Type: CAV N10-1X1B Pipe capacity: 0.1 litres Price on request

New machine Stainless steel model 24-month warranty Benefits: + TOP value for money + powerful planetary stirrer with digital control + Housing made entirely of stainless steel + complies with the strictest hygiene regulations + 10 speeds with constant power transmission + with ingredient shakeand stainless steel safety grille + when lifting the grid, the machine switches off immediately + Machine stands on 4 vibration-absorbing adjustable feet + no ground anchorage necessary + Boiler stroke with lever + Planetary gearbox made of stainless steel + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: - 1x 10 litre stainless steel boiler - 1x whisk for 10 litres boiler - 1x flat stirrer for 10 litres boiler - 1x kneading hook for 10 litres boiler SPECIAL accessories, optionally available at extra charge, prices on request:  ...

Precision ball screw drive, KGT 40mm, Gewindelg 1735mm, Steinmeyer, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw / ball roller spindle with nut - Nominal thread diameter 40mm, pitch 10mm, - total length: 1920mm, 17kg, - ball screw length: 1735mm shaft end 1: 115mm lg - D22 x 40mm lg, thread M30 x 1,5 x 21mm lg, D30 x 54mm lg shaft end 2: 70mm lg - thread M25 x 1,5 x 20mm lg - D25 x 50mm lg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device  ...

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Make: RC GROUP Type: 142.F2 C7 Power: 140 kW refrigerant: R407C Built: 2000 2 pcs. compressor DWM Copeland semi-hermetic a 30 hp electric. Performance Compressor type: D4DJ300X Price on request

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

Unused. New.

Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank - 1 piece of direct 1/2" fresh water connection via float switch and solenoid valve for connection to the customer's side Fresh water network - Tub overflow - drain pipe DN50 for connection to  ...

Diesel engine industry interest as a complete gene set very good condition over BRA on rapeseed oil 6900 with Leroy Somer generator for sale. If intrested the genset as a complete CHP incl. heat exchangers can be ordered all components year 2009 CHP manufacturer was the company Würz energy GmbH

Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Three-point gripper, HGDD-63-A-G2, 1163048, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

Three-point gripper, HGDD-63-A-G1, 1163047, Festo, new We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. 4 - 8 bar Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Dosing pump, diaphragm dosing pump unused Seko 3 head diaphragm dosing pump Stainless steel pump housing Built: 2016 Engine 7.5 kW 380/660 V Pumps Temperature range: -20/30 °C Type 1T10N12FB Capacity: max 11.4 l/h Pressure max 60 barg Speed. max 117 SPM Type: 1T30N12FB Capacity: max 108 l/h Pressure max 60 barg Speed. max 117 SPM Type 1T50N32FB Capacity: max 598 l/h Pressure max 60 barg Speed. max 117 SPM Actuators: Seko SRE.40AA2000 Rotork R-250 with pulsation damper and accessories as shown in photos Shipping dimensions: approx. 1800 x 1800 x 1800 mm Sale also possible in parts! The pump comes from a research facility and has never been used. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.

automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx. 23.0 t Machine will be dismantled in January 2021. Subject to errors in the technical data!

Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

SABROE PAC 163 HR-A Brand:SABROE Type:PAC 163 HR-A Stock number:M21-4474 Cooling capacity:1,437 kW Application:Cooling / Heating Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:175 kg Voltage:400 Volts Power consumption:126 kW Motor power:160 kW Dimensions:5800 x 2660 x 2850 mm Weight:8,800 kg Year:2007 Number in stock:2 piece(s) Price:Quotation request Description: A very well maintained complete Sabroe water-cooled water chiller/heat pump. This water chiller is equipped with a frequency-controlled Sabroe SAB163HR compressor (up to 6,000 RPM), a Schorch 160 kW electric motor, an Alfa Lava evaporator and condenser, a complete control cabinet with a Vacon frequency controller and a Unisab II compressor/chiller controller. All necessary documentation is available. The stated capacity is for water +12/+7°C in/out. Visit also our website: used-refrigeration

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...