gt 128 1 used for sale

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog output module -Manufacturer: Siemens, Simatic S7 Analog Output Module -Type: 6ES7 135-6HD00-0BA1 -Quantity: 1 module available -Dimensions: 70/15/H55 mm -Weight: 0.1 kg

Matrix Stripper "E" 145 system one stripper Matrix plasma Asher Plasma descum semiconductor equipment Applications Photoresist Stripping Matrix System One The Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment represents the Industry Standard in single-wafer photoresist removal and the mainstay of the highly successful System One family. Developed in cooperation with many of the world’s leading IC producers, the Matrix System One Stripper plasma Asher Plasma descum semiconductor equipment has been designed for optimum performance and Cost of Ownership. Find more here - / Contact us at -

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 120 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Dimensions: 120/75/H105 mm -Weight: 4.5 kg

SMG 320 cold forming press for sale. Year of build 1981 Model HPU 315-1300/1150 The machine has a crack in the head piece. Drive power: 2 x 55 KW Oil volume of one tank filling 3800 liters Maximum ram force: 3200 KN Drive cylinder: 3 pieces Cylinder 1: 2000 KN Cylinders 2+3: 600 KN each maximum adjustment: 310 mm Find more here - / Contact us at -

HolzHer Cut 110 for sale. the complete computer has been exchanged and the software has been updated (2022) the guides of the material pusher and saw carriage have been exchanged (2023) A second blower for the air tables has been installed and an additional table has been added. mint condition dismantling is buyer 1 shift operation run and not really loaded. The machine is "freshly" made. Gear stems from the slider + guides have recently been replaced. Bearings and guides are new and computer is new. the whole rebuild cost 40k to 50k Technical data and description: Basic machine pressure beam saw Design: fence right Sawing cycle: away from fence Cutting length: 5850 mm Cutting width: 5850 mm Saw blades Main saw blade Ø 400 X 4,4 X 30 mm, Z72, FZ/TZ (not included!) TCT scoring saw blade Ø 180 x 4.4/5.4 x 30 mm conical (not included!) Cutting height Cutting height: 110 ...

10X Genomics GCG-SR-1 The Chromium Controller is in very good condition Find more here - / Contact us at -

Manufacturer Mathis Year of construction 2005 Roller applicator BA RRC 15004” Infrared dryer IR 5104” Find more here - / Contact us at -

The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Length: 250 mm -Width/Height: 65/155 mm -Dimensions: see drawing in the photos -Weight: 7.7 kg

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

2004 Wagner WDSP II 10000 Press Find more here - / Contact us at -

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW -Shaft: Ø 40 x 80 mm -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 1000 x 660 mm -Dimensions: 1015/660/H70 mm -Weight: 18 kg

Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm -Accuracy level: 2 -Quantity: 5x angle brackets available -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc.

2004 Kuka KR 125L90-2 TJ Operational hour: 36.700 Controller: KRC1 KR 125 L90-2 TJ | KR C1 Year of manufacturing: 2004 Controller type: KR C1 Maximum reach: 2.410 mm Payload: 125 kg External axes: Spare parts: robot type discontinued, spare parts availability limited Find more here - / Contact us at -

2003 Reichenbacher Eco 1419 B CNC portal milling machine Year of construction 2003 Number of spindles: 8 drilling spindles Tool places: 12 Speed range: 1500-24000 rpm Find more here - / Contact us at -

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 1000 x 660 mm -Number: 2x flat angles available -Price: per piece -Dimensions: 1000/660/H12 mm -Weight: 10 kg/pc.

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 1000 x 500 mm -Quantity: 4x flat angles available -Price: per piece -Dimensions: 1000/500/H9 mm -Weight: 5.3 kg/pc.

2021 Videojet 1520 TubeWriter 360 and Videojet 1520 Labels can be damaged or even peel off altogether when exposed to storage conditions or machinery, disrupting experiments when unidentifiable samples need to be replaced. Any tube, any vial, any size: The TubeWriter 360 prints on anything that fits underneath the inkjet printhead, including the side or top of any tube, vial, histology cassette, microscope slide, cryovial and much more with clear labels that ensure you ensure that they are easy to identify and reduce the risk of confusion. This machine, after installation, was only used for training purposes and never for operational purposes. So it can be seen as a brand new machine. The photo below shows different molds/holders that may contain different materials that you want to label. Find more here - / Contact us at -

Coil line with 4 tonne coiler incl. coil turner HS Automation Conveyor system with 4 tonne decoiler incl. coil turner type MS41OL, year of manufacture 2015 Technical data decoiler: Max. Coil weight: 4000 kg Standard strip width: 500 mm Spreading range: 450 - 550 mm Outer ring diameter max: 1900 mm Spreading process Decoiler drive: hydraulic, three-phase motor 400V 50 Hz Decoiling speed: 30 m/min Tape loop control: Pull-off via preset pressure or via loop control Coil stop arms: 6 pieces with quick clamping system Protective device: andes Reel structure and function The reel consists of a solid structure of electro-welded and machined elements. The expanding mandrel can unwind to the left and to the right. Spreading is performed hydraulically via operating elements from the control panel. The reel is equipped with a three-phase motor with which the reel crown can be wound an ...

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 300 x 180 mm -Quantity: 1x angle stop available -Dimensions: 305/180/H20 mm -Weight: 0.6 kg

Square, locksmith square, hair square, precision hair square -Angle stop: Leg length 250 x 160 mm -Quantity: 1x angle stop available -Dimensions: 255/160/H22 mm -Weight: 0.5 kg

Angle bracket, locksmith square, flat angle -Flat angle: Leg length 400 x 195 mm -Quantity: 1x flat angle available -Dimensions: 400/195/H10 mm -Weight: 2.2 kg

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

Angle bracket, locksmith square, flat angle, control angle -Flat angle: Leg length 190 x 120 mm -Quantity: 1x flat angle available -Dimensions: 190/120/H5 mm -Weight: 0.3 kg

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -

2008 KRAUSS MAFFEI 650-1000-520 CZ Injection moldin machine Missing electrical and mechanical parts. Find more here - / Contact us at -

Stop square, locksmith square, control square -Manufacturer: Holex, stop angle DIN 875/1 -Type: 452510 100 x 70 mm -Accuracy level: 1 -Dimensions: 105/70/H20 mm -Weight: 0.3 kg

PLC control, digital output, digital input, digital input module -Manufacturer: Siemens, SIMATIC S7, Digital Input Module with Base Unit -Type: 6ES7 131-6BF01-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0BA0 -Number: 8 modules available -Price: per piece -Dimensions: 140/20/H75 mm -Weight: 0.1 kg/pc.

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - / Contact us at -

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch -Manufacturer: Hirschmann, Ethernet Switch Rail Switch -Type: SPIDER 4TX/1FX EEC -Dimensions: 115/80/H25 mm -Weight: 0.1 kg

PLC control, digital output, digital output module, digital input -Manufacturer: Siemens, Simatic ET 200SP Digital Output Module with Base Unit -Type: 6ES7 136-6BA00-0CA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BA0 -Number: 3 modules available -Price: per piece -Dimensions: 140/20/H70 mm -Weight: 0.1 kg/pc

PLC control, digital output, digital output module, digital input -Manufacturer: Siemens, Simatic ET 200SP Digital Output Module with Base Unit -Type: 6ES7 136-6BA00-0CA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0DA0 -Number: 4 modules available -Price: per piece -Dimensions: 120/20/H75 mm -Weight: 0.1 kg/pc

XVAC 1450 furnace system Sintering furnace up to 1,450°C, XVAC series Technical data: Design type Cold wall system, top loader, retort furnace charging rack. Three substrate levels made of perforated aluminum oxide Lid procedure Manually Heating elements Molybdenum disilicide Usable space size Ø 60 mm, height 200 mm, max. temperature 1.450 °C (N2, Ar, Ar+H2) 1,400 – 1,450 °C (Vacuum) gas lines 1 The gas species Nitrogen Argon (option) Argon + max. 5 % H2 (alternatively) vacuum pump Rotary vane pump Agilent DS40M final pressure

PLC control, digital output, digital output module, digital input -Manufacturer: Siemens, Simatic ET 200SP Digital Output Module with Base Unit -Type: 6ES7 136-6DB00-0CA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0BA0 -Number: 4 modules available -Price: per piece -Dimensions: 120/20/H75 mm -Weight: 0.1 kg/pc

PLC control, digital output, digital output module, digital input -Manufacturer: Siemens, Simatic ET 200SP Digital Output Module with Base Unit -Type: 6ES7 136-6RA00-0BF0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP20-0BF0 -Quantity: 1 module available -Price: per piece -Dimensions: 120/20/H75 mm -Weight: 0.1 kg

1984 Schlüsselbauer Magic 1211 Manufacturer Information: Name: Maschinenbau Schlüsselbauer Machine Details: Model: Schlüsselbauer Magic 1211 Year of Building : 1984 Voltage : 380 V Control Voltage : 24 V Connected Wattage : 50 kW Frequency : 50 Hz Weight Total : 16,000 kg Country of Manufacture: Made in Austria 1984 Ernst Wagner KG Reutlingen HGU 3000 Type: HGU 3000 Load capacity: 3,000 kg Year of construction: 11 / 1984 Weight without battery: 4,410 kg Weight with battery: 6,410 kg Battery weight: min 200 kg / max 200 kg Find more here - / Contact us at -

PLC control, digital output, digital output module, digital input, Base Unit -Manufacturer: Siemens, Simatic ET 200SP Base Unit -Type: 6ES7 193-6BP20-0DA0 -Number: 20 modules available -Price: per piece -Dimensions: 140/20/H35 mm -Weight: 0.1 kg/pc

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 682 mm / 1x 505/177 mm each -Transport dimensions: 682/143/H28 mm -Total weight: 13 kg

This shredder for plastic waste is an essential tool for efficient recycling operations. Designed to handle various types of plastic, it offers reliable performance for reducing waste volume. Perfect for recycling facilities and manufacturing plants, this machine ensures effective plastic waste management. By integrating this equipment into your operations, you can enhance your sustainability efforts and streamline your recycling processes. Ideal for businesses aiming to improve their environmental impact, this solution for plastic waste is a must-have for modern recycling needs. Power: 22 kWVoltage: 380/660 VCurrent: 43.5/25 AFrequency: 50 HzSpeed: 1465 rpmDrive: VDE 0530Efficiency: cos 0.85Protection Class: ISO B Find more here - / Contact us at -

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Dimensions: see drawing in the photos -Length: 490 mm -Dimensions: 490/144/H30 mm -Weight: 10.8 kg

Rippert HL9-630/1070-Bex Extraction system Type : HL9-630/1070-Bex Position : LG 0 Volume : 27,500 m³/h Pressure Increase : 3,750 Pa Density: 1.2 kg/m³ Power Input : 39.0 kW Temperature max: 40°C Temperature Medium: 40°C Motor Capacity : 45.0 kW Speed : 1,450 1/min (RPM) Max. Speed: 1,450 1/min (RPM) Special Speed: 1,450 1/min (RPM) Capacity: 100,000 m³/h Filter hoses: 462 pcs., 4190x140 mm Ø, PE – needle felt 400 g/m², antistatic, calendered, with test certificate class M, the filter hoses were only completely replaced in 12/2022 Support type: Spiral springs for hanging in tabs of the filter hoses Find more here - / Contact us at -

Model : 41-SERIE-1350-WRDW Weight of Machine Parts - Machine: Approx. 7,000 kg - Conveyor table: Approx. 1,050 kg (without motor) - First contact rollers: Approx. 160 kg - Tension roll: Approx. 75 kg Find more here - / Contact us at -

Model: MH 1200 S Manufacturer: MAHO Type of machine : Milling machine Condition : Used Find more here - / Contact us at -

electric motor, three-phase motor -Manufacturer: Caenaho, electric motor from milling machine Stankoimport 6P/2 -Type: 4AM 132 M2 Y3 -Power: 11 kW -Speed: 2900 rpm -Shaft: Ø 38 x 80 mm -Design: B3 -Protection rating: IP44 -Dimensions: 520/290/H340 mm -Weight: 82.1 kg

Power converter, power supply, power supply unit, switching power supply, power supply module, DIN rail power supply -Manufacturer: Mean Well, switching power supply -Type S-100F-24 -Output: 24 V 4.5 A -Dimensions: 200/10/H40 mm -Weight: 0.7 kg

PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit, compact CPU -Manufacturer: Siemens, Compact device CPU 214 -Type: 6ES7214-1AC01-0XB0 /6ES7 214-1AC01-0XB0 -Quantity: 1 module available -Dimensions: 200/80/H65 mm -Weight: 0.4 kg