130,439 used machines on RESALE, but how to find them? Machine Search
Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1300 Belt width in mm: 1100 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive ...
Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece
Universal CNC cycle separation machine of the brand Pinacho suitable for tooling, fixture construction, training and mold making Circumferential diameter 360mm Center width 1000mm Control Fagor 8055 Tailstock MK 3 Tool station Barufaldi 6-fold Speed 1-4000rpm Connection 380V - 5.5 KW
Transnorm spiral helix belt curve conveyor left 90°-1300-1100 IR900 - Showroom machine RA2319 Technical data: Frame width (NB): 1300 mm,1450 mm with Motor belt width (GuB): 1100 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 500 mm / 90° = 2000 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2020 Incl. supports, current height from 300mm to 800mm Optionally available: adjustable up and down with frequency converter Supports, if deviating from the currently installed Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guides Driven: Y ...
Key data: 95 KW, 1500 1/min
DEUTZ BF6M-1013 Engine, 7.2 L Diesel, 95 KW, 1500 rpm engine, 6 cylinder diesel, German Machine, Year 2003 - Engine was built into generator. Since the generator is defective the engine is sold. Engine runs very well, - Video available
Key data: 1100 mm, 1 , 150 mm
Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm
Ref. no.: 16369 Manufacturer: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: very l ...
Steel Plate Length: 3800 mm Width: 1400 mm Thickness: 130 mm 17 T-slots T-slots dimensions: 42 x 27 mm x total height 40 mm External Slots spacing: 300 mm Internal Slots spacing: 200 mm Holes diameter: Ø 40 mm Weight: 5 T
Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1995 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 Conveyor speed m / s: 0,175 scope of delivery: without supports and side ...
Riggs 1000 Three head filler Serial: TT1737 2014, Stainless, Three head filling machine, with 200L stainless tank with level detection, comes with a spare set of pistons so can fill from 25ml - 5L, height adjustable filling heads, with boxes of spare parts, manuals and drawings
Transnorm curved belt conveyor left bend 90°-1400-1200 IR2500 RA2334 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 1400 mm belt width (GB): 1200 mm innerradius (IR): 2500 mm overall height (BH): 260 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,55 kW Conveying speed: contact us for an individual convoying speed Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 2500 Nominal / outside width in mm: 1400 Belt width in mm: 1200 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: ...
Oil filter, filter cartridge -Ecoair BN: 16013 -Identical: with Atlas-Copco 1202835300 -Dimensions: Ø 140 x 300 mm -Number: 42 pieces available -Price: per piece -Weight: 2 kg
pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Equipment: - Controlled axles: Y1, Y2, X, R, Z1, Z2, X1 - Fully dynamic, hydraulic crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
MHG pressure blasting machine SMG 100-100 incl Dust Extractor 1703-1,5
Clamping angle for workpiece clamping -Dimensions: 210/160/H200 mm -Clamping width: 40 mm -Surface: milled -Weight: 6 kg
Key data: 520 mm, 520 mm
Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg
Key data: 318 t, 318
Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg
Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg
Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg
Key data: 318 t, 318
Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg
Power supply unit, DIN rail -Type: TCL024-112 -Weight: 0.3 kg
Inductive sensor, electronics sensor -Manufacturer: Schmersal -Product type: BNS 180-02Z -Number: 3x packages available -Price: per package -Weight: 0.2 kg
Engine: diesel engine Cummins F3.8 - Stage 5 Power: approx. 114 kW / 154 hp Shafts: 7/7 discs with 8 knives per discs & breaker bar with combs Version: track system with hopper with vibro chute Permanent - OVERBAND Magnet remote control Weight: approx. 11 t
Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 29000 ( 25000 + 4000 ) Nominal / outside widt ...
Safety switch, safety switch, TZ -Type: AZM 161CC-12/12rka-024 -24VAC/DC IP67 -Number: 6x available -Price: per piece -Weight per package: 0.5 kg
T-slot plate, clamping plate with T slots, plate field, welding table, welding table -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg
Specifications: - Load capacity (vertical) 100 kg - Face plate diameter 400 mm - Passage opening 60 mm - Face plate manually infinitely tiltable 0 - 135 ° - Rotational movement infinitely variable mot. Adjustable 0.05 - 5 m/min - E.- Footswitch for start - stop - Table height in horizontal position without castors approx. 750 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 450 x H 850 x D 650 mm - Weight approx. 60 kg
PLC control, SIMOTION MOTION controller C240, central assembly -Manufacturer: Siemens -Type: 6AU1240-1AB00-0AA0 -Number: 20x controls available -Price: per piece -Dimensions: 200/125/H120 mm -Weight: 1.3 kg/piece
plastic shaft, plastic material, plastic shaft, plastic shaft material, polyamide -Solid material -Diameter: 335mm -Length: 1055mm -Weight: approx. 110 kg/piece -Quantity: 9 pieces available -Price per piece -Total weight: 1120 kg
1x CNC Table Boring Machine Manufacturer: TOS Type: WHQ Year of Make:1997 Control: Heidenhain TNC 426 in 5-axis X-axis 2000mm Y-axis 1400mm Z-axis 1250mm W-axis. 710 mm B-axis 360 degrees Spindle diameter : 112mm Spindle mount: ISO 50 Spindle speed max: 2000 rpm Table clamping surface: 1400x 1600mm Tool changer: 60 places Chip Conveyor: Yes
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Admission -Drawing with the photos -Dimensions: 250/122/H155 mm -Weight: 9.5 kg
Chuck flange, flange mount, lathe chuck flange, driver flange -Chuck flange: for three-jaw chuck, four-jaw chuck, face plate -External: O 270 x 110 mm -Inside: O 240 x 81 mm -Mount: Camlock short taper 8 (139 mm) -Bolt circle: O 171 mm -Number: 1x disks available -Price per piece -Weight: 16.6 kg
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 129-131 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 240/120/H150 mm -Weight: 11.3 kg
Shore: , shore convenient to (producer): Gubisch 0 Wheel diameter: 140 mm Wheel width: 30 mm New Gubisch feed rollers --------------------------- 7 pieces 140 x 30 mm -------------------------- Price per piece: 126.00 euros Total price from stock: 882.00 plus shipping and VAT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed under pressure: 2,7 mm/sec pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm feed down: 4,25 mm/sec feed up: 8,22 mm/sec oil pressure max. in the work cylinder: 385 bar oil volume: 26 l diameter of piston: 125 mm column daylight: 920 mm voltage: 400 V/ 50 Hz total power requirement: 4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjust in height, • Cylinder Ø 175 mm, piston base Ø 125 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tailstock, counter bearing for dividing head, dividing head -Peak height: 120 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 170/100/H130 mm -Weight: 6.4 kg
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 112 mm -Recording: MK2 -Drawing with the photos -Dimensions: 155/120/H115 mm -Weight: 4 kg
Key data: 4300 mm, 2200 mm
EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)
REIS TUS 115 OK 100 Die Spotting Press pressure 100 t table surface area 890 x 1280 mm ram surface 1000 x 1200 mm distance between columns 1250 mm stroke 1035 mm distance table/ram, max. stroke up, adjustment up 1035 mm side window 700 mm table height over floor 630 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11 t Dimensions (WxDxH): 2,1 x 3,8 x 3,9 m swiveling ram movable table table - tiltable ram interlocking hydraulic ejector in table
pressure: 150 t quantity of oil: 480 l tracking travel: 30 mm safety distance: 180 mm dimensions: 1440x1690x2800 mm total power requirement: 18,5 kW weight of the machine ca.: 4200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1300 mm, 4 , 150 mm
WIDE BELT GRINDING AND CALIBRATION MACHINE Technical details: Working width: 1300 mm Max. workpiece thickness: 150 - . 4.0 mm Sanding belt dimensions: Circumferential mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive 219 kW Year of construction 1992/2004 For woodworking! Other features: - Pneumatic belt guide - Height adjustment by handwheel - EMERGENCY STOP switch - Grinding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed per L: 2800 x W: 1700 mm with 6 rollers each) motor-driven - Control panel operation - Workpiece thickness min./max.: 4.0/150mm - Sanding belt belt width 1300 mm (belt circulation) - Sanding belt support lengthxwidth: 1700/1350 mm
Specifications: X-axis 1,600 mm Y-axis 700 mm Z-axis 800 mm Spindle power 25 kW Spindle speed 100 – 14,000 rpm. Tool holder HSK 63-A Control: CNC SIEMENS Sinumerik 840D Table dimensions 520 x 700 mm Max. table load 800 kg B-axis 360 A° Weight approx. 17,500 kg
Cross-cut saw motor 1.8 kW Milling motor above 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix hand clamp Saw blade 2 slotted discs
Air bellows, roller bellows, air cushions -Manufacturer: Goodyear -Part-Number: 1R11-700 566222709060000 -Weight: 7 kg
Bezel, stick, lynette -Max. Passage: Ø 110 mm -Tip height: 220 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 440/320/H80 mm -Weight: 13.6 kg
maximum number of results exceeded
please refine your search
