gt 128 1 used for sale

One used cutting machine Polar 115 XT Tochscreen photocells chromed table Air table

Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

4 pieces diode laser system, Limo Diocut 1300 – used - : Price per piece from location: 1.950.-€ (net)! Manufacturer: LIMO (Lisotchenko micro-optics) Type: Diocut 1300 Year of Make: 2013 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Frankenberg camp / Saxony

Throughput depends on material type, speed, and cutting set Capacity: up to 2.000 kg/h Electric power: 7,5 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 55 Length: 95 Height: 105

Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units

Gear motor, electric motor, electric gear motor -Speed: 7.5 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: 50 mm -Protection class: IP 55 -Brake: 24 V -Dimensions: 820/320/320 mm -Weight: 100 kg

throat: - mm tool adaptor: - power requirement: - kW weight of the machine ca.: 70 kg dimensions of the machine ca.: ? m Articulated spindle drill head with 8 spindles Maximum pitch circle diameter 200 mm, Minimum spindle distance 41 mm, Height connecting flange/spindle end : 570 mm, Gear ratio 1:2, Weight approx. 70 kg Drilling capacity 22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pile turner Rachner F 1800 PA/RS; Condition obsolete; Platform size 800x1270mm; Opening width 1800mm; Vibration function; Blowing air with extra large blower 7.5KW; Side ruler; Load capacity 1000kg. Pile turner Rachner F 1800 PA/RS; condition rebuilt; size 800x1270mm; max.pile hight 1800mm; jogging; airing with big blower 7,5KW; adjustable aligning gauge; carrying power 1000kg.

Gear motor, electric motor, electric gear motor -Speed: 200 rpm -Power: 0.055 kW -Construction: B5 angle -Diameter shaft: 14 mm -Protection class: IP 44 -Dimensions: 290/150/H135 mm -Weight: 5.3 kg

Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 19 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Length: 110 Height: 130

Key data: 150 mm

ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28

All stainless steel Hopper capacity: 1200 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 11 KW Installation dimensions of machines in cm: Width: 162 Length: 224 Height: 191

Open Spray Stand 2x2,1x2,2 The overspray during powdering is absorbed by the extraction unit. The powder spray stand is delivered on rollers and is therefore mobile. - The extraction system is equipped with a 60 L powder container (rollable). - As a 1st stage, there are 4 filters in the extractor. - Above the cab is the absolute filter. 1. Dimensions of the powder stand width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m³/h Electric motor 3.0 kW 3. Filter Φ 325x600 4 pcs Type Filter Cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type bag filter

TRUMPF Trumabend 125/3.1-DA24 hydraulic Press brake YOM 1994 Pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm total power requirement 15 kW column arm 350 mm ajustment speed 130 mm/sec work speed 1-10 m/min return speed 100 mm/sec back stop - adjustable 1000 mm Stroke 200 mm dayligth 400 mm Pressure power 280 bar dimensions of the machine ca. 3,6 x 2,3 x 2,8 m weight of the machine ca. 9,5 t Control unit CNC Maker of control unit DA24 4-Axis Control (y1,y2,x,r)

COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm

• This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) • Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. • The visible surfaces are made of stainless steel 1.4301 and are brushed (RA

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 450/295/H250 mm -Weight: 43 kg

power capacity: - kW tool adaptor: KOMET PKB 200-20-112 total power requirement: - kW weight of the machine ca.: 700 kg dimensions of the machine ca.: 1,6 0,7 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange for: drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 185 mm -Short cones: 6 -Quantity: 1x disc available -Weight: 4 kg

live center, live center, live morse taper, live center, live lathe center, live center -Tip: shaft mounted -Recording: MK6 -Quantity: 1 piece available -Weight: 8 kg

swing diameter: 370 - 800 mm weight of the machine ca.: 650 kg dimensions of the machine ca.: 20,41,3 m Open steady rest / setting block - fixed with 4 quills Bed width approx. 360 mm Total base width approx. 720 mm Centre height approx. 500 mm Space requirement approx. 1950 x 400 x 1300 mm Weight approx. 650 kg Working range: approx. Ø 370 - 800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 – used - : Price per piece from location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of Make: 2007 Q400.00m3/h H 14,00m N 1460 1/min Condition: good Available: immediately Location: Frankenberg camp / Saxony

8 boxes (16 rolls, 10,000 labels each) labels for label printers, Logopak, 170x75, – used - : Price for complete acceptance: 150.-€ (net). Manufacturer: Logopak Type: 170x75 Label rolls: 2 per box Labels on Roll: 10,000 pieces Per box 20,000 pieces Labels Condition: very good Available: immediately Location: Frankenberg camp / Saxony

Energy chain, cable drag chain -Manufacturer: igus -Type: 1880.10.12.BC -Type: 140020 B - Passage: 100 x 50 mm -Number: 10x screw-on bracket available -Price per piece

Connector, plug, sensor module, G2 flat module -Manufacturer: Lumberg -Type: 0976 PFC 101 -Number: 10x plugs available -Price: per piece -Weight: 0.06 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 11x spindle tools -Take: SK40 -partly with: CNC pull studs -different shaft sizes: 25-180 mm -Price: complete -Weight: 42 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 36x spindle tools -Take: SK40 -with: CNC pull studs -different shaft sizes: 30-125 mm -Price: complete -Weight: 86 kg

Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 130 mm -Length: 475 mm -Height: 100 mm -Number: 1x saver available -Price: per piece -Weight: 5.2 kg/piece

Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 150 mm -Length: 595 mm Height: 74 mm -Drawing with the pictures -Number: 4x savers available -Price: per piece -Weight: 5.6 kg/piece

Plastic protectors, impact protection, bollards, polyamide -Solid material -Width: 123 mm -Length: 330 mm -Height: 82/50 mm -Drawing in the pictures -Number: 19 protectors available - Price: per piece -Weight: 2.4 kg/piece

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 9x spindle tools -Take: SK40 -different shaft sizes: 85-125 mm -Price: complete -Weight: 17 kg

Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 135 mm -Admission: -Dimensions: 165/300/H190 mm -Weight: 8 kg

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 150 mm adjustable -Admission: -Dimensions: 250/130/H155 mm -Weight: 12.6 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 140 mm -Plating: brass -lower quill is missing -Tip height: 230 mm -Drawings with the photos -Price: per piece -Number: 1x available -Dimensions: 510/480/H110 mm -Weight: 22 kg

Slack adjuster manual, slack adjuster, brake slack adjuster, brake adjuster -Number: 5 pieces available -Price: per piece -Dimensions: 310/160/H50 mm -Weight: 3.6 kg/piece

Long link roller chains, transport chain, roller chain, drive chain -per chain length: m -Pitch: 160 mm -1x chain: 5.1 m available -Weight 60 kg -1x chain: 3.5 m available -Weight 45 kg -2x chain: 9.92 m available -Weight: 81.5 kg/pc. -Price: 55 Eur/m -Weight: 9.5 kg/m

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis: for forklifts -with: slewing ring -Wheel intake -Dwg. No:. 5.44.181 -1 piece Part No.: 01472 -1 piece Part No.: 01423 -Number: 2x landing gear available -Price: per piece -Dimensions: 290/290/H290 mm -Weight: 32 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Bicycle pump type: -with tank and control valve -Drive: 24 V -Dimensions: 285/280/H750 mm -Weight: 38 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 150 mm -Width: 25 mm -Number: 2x discs available -Price: per piece -Minimum purchase: complete -Weight: 1 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 170 mm -Width: 32 mm -Number: 1x discs available -Price: per piece -Weight: 1.4 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 143 mm -Width: 25 mm -Number: 1x discs available -Price: per piece -Weight: 0.9 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for all 2 pieces -Weight: 4 kg

Pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Festo -Type: -Piston rod: 20 mm -Cylinder mounting: Ø 16 mm -Piston rod mounting: M16 x 1.5 mm -Stroke: max. 1180 mm -Max.: 10 bar -Quantity: 1 cylinder available -Weight: 11 kg

Three-phase motor, electric motor -Motor: is unused -Power: 15 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Gear motor, electric motor, electric gear motor -Motor power: 0.25 kW -Speed: 26.5 rpm -Design: B3 angle -Drive shaft hollow shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 200/190/H400 mm -Weight: 10 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Three-phase motor, electric motor -Motor: unused -Voltage: 500 volts -Power: 11 kW -Speed: 2920 rpm -Shaft: Ø 38 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 1500 kg traversing speed: 200 m/min total power requirement: 55 kW dimensions of the machine ca.: 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT 4 servo motors for all axial movements CNC CONTROL PANEL 15 5” touch screen IPG laser sources and coolers integrated Precitec Procutter cutting head system AIR FILTER (compressed air filter) CONVEYOR BELT under cutting area Closed housing and specially coated filter protection windows LOADING / DISCHARGING SYSTEM PROPORTIONAL GAS AND PIPE SYSTEM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.