gripper used for sale

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition and can be inspected at any time  ...

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on reques ...

Glass line consists of following machines: Bulk glass depalletiser BERCHI Rinser WAP with 60 grippers New bottle detector KRONES Lineatronic Pressure filler SIMONAZZI 80 fillers Crowner @ 20 Screw capper @ 10 Premix SIMONAZZI Cluster machine SMI Traypacker SMI Palletiser BERCHI Pallet wrapper Bottle conveyors Pack conveyors Pallet transport

Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997

Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990

Standard configuration Machine ? Solid machine frame with integrated laser resonator ? Feed station with self centering clamps ? Automatic tube support for raw material ? Feeder claws with self centering parallel collet chuck ? High-precision motors: Digital 3-phase servo motors with high precision of the drive axes. ? Part removal station PRS 3001 with brush table, finished parts up to 3000 mm long ? Tube support for finished parts with wheel-away guide rollers ? Enclosed beam delivery ? NitroLine ? FocusLine ? SprintLine ? Laser power control ? Programmable cutting gas pressure ? Automatic shutdown device ? Work area lighting TRUMPF laser ? CO2 laser TruFlow 2000 ? Radio-frequency excitation ? Maintenance-free radial turbine blower ? Laser control TASC 3 ? Laser log book function ? Chiller Cutting head ? Laser cutting head with 155 mm (6?) lens ? ControlLine Control ? Sinumerik ...

Automation SheetMaster ? Standard configuration ? Suction frame 3000 x 1500 mm ? Peeler cup ? Vacuum sensor ? Central lubrication ? Sheet thickness sensor for double sheet check ? Control TASC 100 ? Clamp closing automatically ? Peeling system ? Suction plate module GripMaster 3000 x 1500 mm ? GripMaster Standard / 1600 ? With the following configuration: ? GripMaster Standard ? Scissor table 400 mm ? Sheet skeleton grippers with sensor ? Scrap skeleton pallet tiltable, 3000 x 1500 mm ? SortMaster Box ? TooMaster with 40 stations ? Store interface ? Safety devices for connection to storage system incl. 1st light barrier circuit

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Horizontal panel saw SCM model SIGMA 90 General characteristics: -useful cutting length 4500mm -useful cutting depth 4300mm -blade protrusion 90mm -fluted pressor -pusher with 9 pneumatic grippers -side approach -front planes in bakelite and air veil: 1 fixed 2500x600mm 2 x 1500x600mm cabinets Blade group: -Independent blade group and engraver -main blade D=350mm -engraver D=160mm Programming: -control MASTER 124/S Machine according to CE regulations

various grippers/pliers in stock (see photos) each with adapter plates

Capacity: 100 t Stroke of each cylinder: 200 mm Width material maximum: 10 mm Distance grippers maximum: 710 mm Lauffer PT Hydraulic frame presses for metal forming; From 630 kN to 10.000 kN freely configurable for your application. Whether forming, punching, cutting or embossing, solid and variable press frame concept allows individual adaptation of the press size to your requirements. For smaller presses in monobloc design  R-PTFrame presses with column-guided ram, centric cutting shock-damping and fixed stop Capacity Kg:           100000 Distance between column:710mm Table Length:          710mm Table Width:           560mm Table Height:          450mm Ram stroke:            200mm Approche speed:         ...

PRODUTECH ALPI DECA N coil-fed punching machine which was built in Italy in 2010 is designed for precision punching, blanking and marking of sheet metal with a maximum thickness of 3 mm. The machine’s structure, made of thick electrically welded steel sheets, has all the necessary components to ensure the versatility of high-capacity mass production. One of these elements is the MultiTool head with punches designed for all types of machining, through which any shape can be punched. In addition, each of the punch holders and dies can be controlled independently, even during rotation. The machining process starts with the gradual unrolling of the sheet metal from the coil towards the punching station by the straightener and decoilers. A feed system consisting of rubber-coated and ground roller assemblies then moves the material during continuous machining without the need for stops or ...

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Salvagnini S4.40 punching machine with shear system  CNC control: Salvagnini SysCon Specifications: Working area: 4064x 1803 mm Max dimension of the sheet: 4064x 1803 mm Min dimensions of the sheet: 370x 300 mm Min and Max Thickness: 0.5 -5 according to the material used Maximum weight of the sheet: no limit Grippers for automatic positioning of the blehe: 13x Technology: Multi-press punching head with hydraulic drive Time for the replacement of the punching tool: 0 sec (each tool is ready for use= Simulation Possibility of activating two or more punching units Weight : 19000 kg Machine dimensions: 9967x6426 mm Power 63kW Air supply: 5 bar Punching Productivity & Cutting Productivity  Maximum material thickness: Alumumuim with breaking strength 200M/mm²: 5.0 mm Steel with breaking strength 410N/mm² : 3.5 mm Stainless steel with breaking strength 680 N/mm²:  ...

Capacity: ca. 4.500 Fl./St. with many format parts Direction: left-right 48 Grippers More then 300 machines new and second hand on our seema .de

System for packaging window sills, each in double pairs, x-axis: 10,000mm, y-axis: 1000mm, z-axis: 200mm, possible dimensions of window sills: 2500-4100x230-450mm, includes packaging unit, lifting beam with lateral swivel grippers and vacuum suction cups, surface gantry, scissor lift unit as z-axis, gantry frame, safety fence with doors, PLC control, an on-site inspection is possible.

Was used for toast rolls, includes 2x pick & place robots ABB FlexPicker IRB 360 for grouping, IRC with PC processor, PC, monitor and visualization, Komatec vision system, Siemens S7, remote maintenance, operation on swivel arm, picker 1&2 suction grippers, various belts for product transport and frame with protection system.

There are 4 Kuka robots with various grippers, control cabinets, housing and conveyor technology (Interroll) available. Designed for handling a power unit of wallboxes and handling the entire wallbox. KR120) Load capacity: 120kg, reach: 2700mm. KR50) Load capacity: 50kg, range: 2700mm. List with specifications of the accessories in the pictures.

Profile steel pliers, section iron grippers TAKRAF ZP 1 ( ZP1 ) load capacity: 1000 kg gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm

Grippers, drum grippers NEUMANN FSP K 1-36 H / SO load capacity: 360 kg Material: stainless steel ( 1.4301 ) Crane eye: Ø 56 mm, cross-section: 22 x 8 mm used, tested ! Dimensions: 800 x 640 x 310 mm

Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a selector mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire selector mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance  ...

turning diameter over bed: 32 mm spindle passage: 32 mm turning length: 450 mm Control: Fanuc 31i-Model B c-axis: 0,001 Grad gripping station: 32 mm speeds: 6000 U/min c-axis: 0,001 0 turret (x-stations): 2x16 Stationen worktool system: 16 Stirnseite worktool system: 16 Quer-Rückseite worktool system: 5 Drehmeißel/Turn total power requirement: 3,7/5,5 kW weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,6 x 2 x 1,9 m driven tools: 24 16+8 bar loader: FMB 3-36/3200 CNC Swiss type lathe Maier ML 32-F2, year 2019 with loading magazine FMB 3-36 Very good condition, few working hours # Vib Turn chip breaking software # FMB 3-36 is equipped with two channels 22 and 32mm. # Pick-up spindle is equipped with Forkardt chuck. Max. overlap diameter 9mm # Extended headstock stroke Z1 axis 450mm (main spindle) # Extended headstock stroke Z2-axis 340mm (pick-up spindle) # High pressu ...

Piston rod, 3 pieces FIBRO, LÄPPLE, FLT 0.121.00266 for parallel grippers 52.85.3-501 / 601 piston diameter: Ø 36 mm, length: 30 mm rod diameter: Ø 25 mm, length: 34 mm thread: M14 x 1.5, length: 20 mm Other quantities on request ! New ! Dimensions ( single piston rod ): 200 x 36 x 36 mm Dimensions ( packaging ): 200 x 180 x 40 mm

-Trolley speed 1-130 m/min -Trolley return 130 m/min -Pusher speed 1-60 m/min. -Pusher return 60 m/min. -Dedusting fi 200 mm, 115 mm. -Side loading -Elevator width 2200 mm -Total power 22 kW The PRISMATIC 301 SPT is an automatic loading version with lifting table and pusher with grippers. It is a machine that provides high speed in the execution of the cutting cycle, thanks to special double-sided grippers equipped with a lower retracting appendix (Giben patent), allowing the collection of a stack of plates from the lifter without the use of other devices.

Used production line for packaging juices. The line consists of: - TRIBLOCK ARROW PET 9/9/3, NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) STM 2014 - BUFFER TANK 1000L STM 2014 - CIRCULATION TANK 80L STM 2014 - PUMPS WPS 4 - 2 PCS, RETURN PUMP CIP WPS 6 1 PCS STM 2014 - NUT FEEDER BCF1 STM 2014 - AIR CONVEYOR SET STM 2014 - PLATE CONVEYOR SET STM 2014 - ROTARY COLLECTING TABLE STM 2014 - PET BOTTLE ORIENTATOR SB6000 STM 2013 - SCREW CAPPER ZB 6000, NUMBER OF HEADS 6, OUTPUT 6000/HOUR STM 2013 - PRINTER HITACHI INK JET UX HITACHI 2016 - LABELLING MACHINE EC-09/ LABELER EC-09 BIENKOWSKI 2018

- Trolley speed 1-130 m/min -Return of the trolley 130 m/min - Pusher speed 1-60m/min. -Push return 60 m/min. -Dust extraction fi 200 mm, 115 mm. -Side loading -Elevator width 2200 mm -Total power 22 kW PRISMATIC 301 SPT is the automatic loading version with a raised table and a pusher with grippers. It is a machine that provides high speed in the execution of the cutting cycle, thanks to special double-sided grippers equipped with a lower retracting tab /Giben patent/, enabling the collection of a stack of panels from the lift without the use of other devices.

Key data: 650 mm, 600 mm, 500 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany until week 49 / 2023 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar possible ( IKZ  ...

turning diameter: 65 mm turning length: 150 mm control: Fanuc 32i-B Number of working hours: 11028 h chuck diameter: 250 mm turning speeds: 4000 U/min turret (x-stations): 14 VDI 30 Number of axles: 3 (X-Y-Z) St. turret (x-stations): 7 VDI 30 Number of axles: 2 (X-Z) St. c-axis: 0,001 ° y-Axis min./max.: +/-75 mm chip conveyor: Knoll 400 S-1/335 Bj. 2013 total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4,7 x 1,72 x 2,16 m driven tools: 7 Handling system: FMB Unirobot M-10iA 12-7P Bj. 2017 CNC universal lathe INDEX IT600, year of manufacture 2014 - The following accessories would be supplied: o 2-jaw chuck Schunk ROTA 2B 200 o approx. 40 sets of clamping jaws o Approx. 45 tool holders (1x driven), but without cutting tool holder/ cutting tool o Compact handling system FMB unirobot M-10iA-12-7P o 12x 7 pallets each for various blanks - The b ...

Used labelling machine by Krones A. G. Herman Kronseder type Universella 723-931, new 1993. Specification: - number of discs: 15, - number of pallets in the aggregate: 8, - number of grippers in the cylinder: 6, - bander: large and small, - capacity 18,000 bottles/h, - several bottle formats, - side positioning of bottles.

Used Filling Triblock GAI 12 1 16 1 16 Valves 2500 Bph Rinsing machine with 12 grippers applying a single treatment of air blown on the bottle mouth before straightening Carousel grippers manually variable in height 1 1 head station for vacuum and gas injection before the filling machine with variable head in height 2 Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons 1 capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Head manually variable in height All frame made of stainless steel Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Year 1995 marked CE Production approximately 2 500 bph with the 0 75 Ml [...for more information send your inquiry to the seller.] refno: M121

Used Filling Monoblock GAI for Cans Year 2020 Introduction to the Filling Monoblock GAI The Used Filling Monoblock GAI model MLE6661 CAN 002 stands out as an advanced solution in automated canning technology Manufactured by GAI in 2020 this machine is renowned for its efficiency and technical precision Technical Specifications Designed for beer soft drinks sparkling water and sparkling wine the machine boasts a production capacity of 2 000 cans per hour Professionals in the sector choose the MLE6661 CAN 002 model for its reliability and high quality filling process Rinsing Component The integrated rinser in the Monoblock GAI features 6 grippers Furthermore its single treatment mode ensures effective can cleaning before filling This step is crucial to maintain the integrity of the final product Filling Component Equipped with 6 valves the filler operates using an isobaric system for preci ...

Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine How to build one isobaric triblock The isobaric filler c ...

Used Bertolaso Filling Monoblock PET 2014 This Bertolaso filling monoblock is composed of a rinser filler and capper The machine is really kept in excellent condition and was built in 2014 The rinser has 16 single treatment grippers the isobaric filler consists of 24 valves while the capper is a 3 head and handles types of plastic and aluminum screw taps The dimensions of the machine are 4300x1800x2800 and it has a weight of 4300 kg The machine works with 3 types of formats including 0 5 l 1 l and 1 5 l [...for more information send your inquiry to the seller.] refno: M212

Used Bottle Washer Procomac Linestar 1994 Discover the exceptional performance of the 1994 Procomac Linestar 1R 4 8 16 50 150 bottle washer With 50 grippers equipped with augers and stars this rinser can handle a variety of bottle sizes ranging from 0 20L to 0 75L with a maximum hourly production of 20 000 pieces The bottle entry is single and the rotation direction is from right to left The Linestar bottle washer is designed with advanced features for efficient cleaning It comes with a heat exchanger and a cleaning system that uses pulp The machine has 1 soda bath to ensure thorough cleaning Safety features are included to ensure the safe operation of the machine The bottle washer is in production and is designed to handle a minimum bottle diameter of 0 20 and a maximum of 0 75 All necessary manuals are included for reference Choose the Procomac Linestar bottle washer for your productio ...

Enoberg Bottle Filling Monoblock for still water This used Bottle Filling Monoblock model EVF 24 24 6 N S comes with an integrated rinsing filling and capping system and consists of A rotary rinser with 24 nozzles for the rinsing of bottles A rotary filler with 24 valves for the electronic volumetric filling A capper with 6 heads for the application of plastic screw caps or pressure caps Monoblock Bottling with a machine pitch of 150 72 mm Counterclockwise machine Neck Handling bottle conveying system Key features The Enoberg Filling Monoblock for still water distinguishes itself with its compact frame which considerably simplifies operations to manage clean and maintain the machine and ensures substantial savings on space Filling module equipped with electronic meters to ensure precision The working space of the machine is entirely made of stainless steel and glass ensuring a high stand ...

Used Filling Monoblock for Beer Comac 2014 For those in the market for a used filling monoblock for beer consider this Comac 6 6 1 model from 2014 This machine is capable of producing up to 700 bottles per hour and is designed specifically for glass containers The available formats for this machine are 0 33 L and 0 50 L and it is meant for filling beer The rinser on this machine features six grippers and a single treatment cycle which helps to efficiently clean and prepare the bottles for filling The filler has six valves and operates using an isobaric fill type which means that the pressure in the bottle is equal to the pressure in the filling tank This ensures that the beer is filled evenly and at the correct pressure The filler also features a fixed type of nozzle and a traditional isobaric valve The capper on this machine is designed specifically for crown caps and features one head  ...

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

Used Filling Monoblock Simonazzi Azzurra 120 48000 bph Used filling monoblock Simonazzi Azzurra 120 for glass bottles with maximum capacity up to 48 000 BPH current size 200ml Suitable for CSD products The used Simonazzi triblock glass is composed by Rinser 2002 SIG Simonazzi BLOKRINSER Filler 1987 Sarcmi Azzurra 120 24 update in 2002 Capper Krones Twist off 2011 Type of transfer Transfer star wheels Capper Brand Krones Twist Off Machine Pitch mm 110 mm Max container height 200 mm Used Filling Monoblock Simonazzi Azzurra condition now as it is or is possibly overhauled and guaranteed Warranty of the used Simonazzi triblock glass 6 months in case of revision option to be quoted separately Worktop height 1200 mm Pressure 7 Bar PLC Siemens Simatic HMI Siemens Simatic TP27 Complete of CIP Premix CO2 checker Used Filling triblock This used filling monoblock Simonazzi Azzurra 120 has an impres ...

In a highly competitive and ever evolving sector such as bottling and packaging having high quality equipment is crucial to ensuring efficiency and precision One of the bottling lines that has proven to offer these qualities is the complete Doypack pouches line with a capacity of 600 kg h In addition this machine could be described as approximately brand new as it has been used for only 1 000 hours to produce 5 million pouches With an operating speed of 600 Kg h this line is optimized for pouch containers and has a format capacity of 100g This makes it ideal for a wide range of products including dairy products juices ready to drink creams and sauces One of its distinctive features is the weight based filling type thus ensuring that each bag contains the exact amount of product The efficiency of the line is further enhanced by key components from renowned manufacturers Tetra Pak Contherm ...

Used Filling Monoblock for Beer Moravek 2016 The Mor vek 12 12 1 monoblock filling machine is an efficient and reliable machine used to fill beer at a high speed of 2500 bottles per hour It is equipped with 12 grippers for a single treatment and 12 valves with a fixed nozzle to fill beer in glass containers of 0 33L and 0 50L This is an ideal machine for beer production in any size of brewery as it offers a quick consistent and high quality output The machine is also designed with safety features and is easy to use and maintain It also comes with a crown capper with a head of 29 and a clockwise rotation direction Aside from that manuals are available to make the most out of your machine The Mor vek Tribloc 12 12 1 is currently in storage and ready to be used in any production line The reliable and efficient performance of the machine ensures that it can be used to produce high quality be ...

New Filling Monoblock Bertolaso 30 30 4 PET Glass up to 6500 bph Notice Brand NEW Bertolaso monoblock never used Zero working hours Pristine condition The perfect opportunity to purchase a new monoblock at a used price This new Bertolaso 30 30 4 monoblock emerges as an advanced technological solution specifically designed to optimize filling operations for syrups filling system Manufacturer and Model Produced by Bertolaso a benchmark name in the industry this monoblock stands out for its performance and build quality The model specification 30 30 4 combined with its production year 2021 provides crucial information on its current relevance in the bottling solution landscape Speed and Capacity With a speed of 6500 BPH this filling monoblock Bertolaso can handle both PET and glass containers ensuring accuracy and consistency in the filling process Rinser The rinser is equipped with 30 grip ...

Used complete spirits line up to 8000 bph 1 Used depalletizer ACMI Stratos 8000 bph The Stratos depalletizer of the used complete spirits line up to 8000 BPH produced by ACMI in 2003 is a technologically advanced device designed for the bottling industry With an operating capacity of 8000 BPH it operates in the used equipment for spirit with an automatic mode ensuring high efficiency in the bottle introduction process The machine despite having been dismantled in September 2021 is preserved in excellent condition It features crucial features such as a flap removal system and pallet storage capabilities An important feature of the Stratos depalletizer is its size of approximately 20 m2 By integrating a specific table for the alignment of round bottles safety barriers and pallet conveyor belts Human intervention in this used complete spirits line up to 8000 BPH is limited to the initial st ...

Used filling monoblock Melegari up to 30000 bph In the industrial bottling landscape notably the Melegari filling monoblock model FILLJET NP B 60 60 18 stands out Designed to optimize production it boasts a capacity of up to 30000 BPH Furthermore this analysis evaluates its technical specs operational efficiency and adaptability It emphasizes its significant impact in still water bottling Operational Efficiency and Production Capacity Manufactured in 2015 and still operational the machinery proves its durability and reliability Importantly it handles PET containers in 0 20 L 0 33 L and 0 6 L formats Consequently this allows significant versatility in product sizes A speed of 30000 BPH indicates remarkable production efficiency positioning it as a competitive option for high volume facilities Componentry and Technological Innovation The rinser incorporates 60 grippers for effective single ...

Euromac hydraulic punching press type CX 1000/30 rb.1998. Parameters : - pressure-max. 30 t - max. processed sheet in Y-X axis : 1000 mm x 10,000 mm (with repositioning) - steel sheet thickness 6 mm - max . diameter of punch station D-80 mm - 200 strokes per minute - CNC Control Euromac/Windows Type of working table: brush Number of grippers holding sheet metal: 2 Dimensions DxSxW: 4000x2800x1800 mm, Weight 5230 kg, drives 7.5 kW. Tools with the machine. Full technical documentation. Possible, installation and training of machine operation and after-sales service.

Onion peeling machine from the Dutch company DOFRA. For sale two such machines. - The efficiency of one machine is from 50 to 70 onions per minute, which gives an average of about 360 kg of peeled onions per hour (i.e. 60 pcs x 0,1 kg= 6 kg/min x 60min=360 kg/h). This efficiency is tested and confirmed (with one person stacking and one person controlling the final peeling stage). -has a hopper - belt with takers - the onion is taken from the charging basket, from which it is transported by a belt conveyor to the peeling section. - The cutting mechanism of the peeler also cuts the outer scales of the onion for easy removal. The depth of the incision can be adjusted to peel one or more scales. From the peeling section, the onions go to the rotary grippers, which, with the help of an air stream and with the help of the rotary motion of the grippers, get rid of the onion husks. -  ...

Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0

Used filling triblock ALFATEK Elvira 16 20 3 year 2009 Initially the ALFATEK Elvira 16 20 3 filling triblock created in 2009 stands as a benchmark of engineering excellence for bottling in glass containers 1 Model Description and Operational Capability Configured for an impressive throughput of 4 000 bottles per hour BPH it specifically targets handling 0 75 liter glass containers Furthermore the Filling Triblock Alfatek Elvira integrates three main operational modules the rinser the filler and the capper Each module is meticulously tailored for a distinct phase of the bottling process ensuring a streamlined operation 2 Rinsing Unit of the Filling triblock Alfatek Elvira The Filling Triblock Alfatek Elvira is equipped with 16 grippers the rinsing system ensures containers are thoroughly cleaned prior to filling Consequently the gripping mechanism is ingeniously designed to handle glass c ...

Used Isobaric Filling Triblock VIMERCATI 28 48 8 Year 2001 Firstly the VIMERCATI 28 48 8 bottling system created in 2001 is notably advanced for the bottling industry especially for isobaric filling This document meticulously offers a comprehensive analysis focusing on its detailed specifications and also covering its application in beverage filling Production Capacity and Versatility Moreover the triblock boasts a capability of processing 8000 bottles per hour BPH It s exceptionally efficient for a variety of PET container formats 0 50 L 1 0 L 1 5 L and 2 L Such unparalleled flexibility meets diverse production needs and adapts to changing market demands seamlessly Rinsing Component of the Filling Triblock Vimercati 28 48 8 Additionally it features 28 grippers for thorough container treatment This essential stage ensures containers are impeccably clean before the filling process It adep ...

- Drop pressure - Running direction: Left - Right - Capacity: 3,000 bph - Rinser 18 grippers - With universal pliers guide stars, for different bottle formats - 60 different bottles of 200 ml – 1500 ml - Bottles H: 180 – 360 mm, Ø 54 – 110 mm - Phase 1 filler inert gas rinsing of the cylinders - Phase 2 fast filling - Phase 3 slow filling - Phase 4 Fill Level Compensation - Fully equipped machine - With CIP installation - With recycling platform, filters and 80l container - Machine in perfect condition

Key data: 650 mm, 600 mm, 500 mm

Manufacturer : Hermle Model: C 30 U Number of machines : 2 Control : Heidenhain i TNC 530 Year of construction : 2008 / 2009 Switch-on hours : approx. 115000 h Spindle running time : 24400 h Location : Germany Dismantling in week 5 / 2024 then from warehouse Sweden Specifications Max. spindle speed: 28000 rpm Spindle mount : HSK A 63 Number of synchronously controlled axes : 5 Travel X-axis : 650 mm Y-axis : 600 mm Z-axis: 500 mm A-axis : +/- 115 º MM B-axis : 360° NC serving table diam. 280 mm Tool Locations Pick Up: 32 Positions Additional magazine: 157 lots Total tool slots : 189 lots Loading and unloading area: 8 lots Tool length max.: 300 mm Tool diameter max. 125 mm Tool weight max.: 8 kg Dimensions Length : 3154 MM Width : 2354 MM Height 2892 MM Machine weight : 10500 KG Other equipment features - max. coolant pressure 80 bar poss ...