grinding used for sale

Schaudt PF4 1000 - Premium overhaul [RETROFIT] - CNC grinding machine for individual requirements - Tip height: 180 mm - Grinding length: 1,000 mm - Control: Siemens Sinumerik ONE or Fanuc - Workpiece weight: approx. 300kg - Workpiece headstock: MK4 - Tailstock: MK4 - Installation dimensions: approx. 4,500x2,400 mm Options: (other options also possible) - Balancing & grinding sensors - In-process measuring device for length & Ø - Dressing spindle for diaform roller - B-axis for swivelling grinding headstock - Second / Third External Loop Unit - Internal loop device - Upgrade to non-circular & thread grinding - Automatic door drive - suitable automation - Peak increase - u.v.m. on request / customer request

Stylus grinding machine PARPAS Type AU Fabr. No. 854/36 Year of construction 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm. Motor power approx. 0.55 kW Mains connection 380 Volt, 50 Hz - Holder for collets (system DECKEL with S20x2) - Collet 15.0 mm- Diamant grinding wheel dresser for the grinding wheel end side Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition; used

Drill grinding machine GÜHRING Type SS 15 Fabr. No. 909 Year of construction approx. 1977 Drill diameter max. 40 mm Grinding wheel diameter right 300 mm Grinding wheel diameter left 250 mm Grinding wheel width 40 mm Grinding spindle speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Tip angle infinitely adjustable - Sharpening device - Gear motor for height oscillation in front of the pot disc - Diamond dressing holder - various drill holders - coolant device Space requirement L x W x H 1200 x 950 x 1550 mm Weight approx. 1150 kg; used

CNC Univ. Tool grinding machine SCHÜTTE type BU 400 CNC 4 Fabr. SKU: 03-02 Year of construction 1990 4-axis (X, Y, Z and R)Table clamping surface 1300 x 250 mm Center width 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kW Mains connection 380 Volt, 50 Hz, 25 Amp. - CNC control dismantled - Coolant device adjacent Space need L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control missing. good condition, ideal for control conversion; used

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Motor power grinding wheelhead: 15 Cv, Total power: 16.5 Cv, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Weight: 1.900 kg

Specifications Grinding diameter max.: 100 mm Longitudinal movement of the table: 55 mm Grinding head vertical adjustment: 160 mm Swivel range of the grinding head: Horizontal: 360° Speed of the grinding spindle: Number (levels): 2 from: 2800 rpm up to: 5100 rpm Connection 50 Hz 3x: 380 volts Grinding spindle motor: 0.50 hp Machine weight approx.: 400 kg Dimensions machine: Length: 1000 mm Width: 950 mm Height: 1550 mm

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

Grinding machine, angle grinder, turning steel grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -Grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Surface grinding machine, grinding machine -Surface grinding machine: Brown & Sharpe 612 Micromaster -Magnetic plate: 300 x 150 mm -Table: x 370 mm/y 180 mm -Max. Grinding height: 250 mm -Grinding wheels diameter: 180 mm -Transport dimensions: 1000/1400/H2280 mm -Weight: 772 kg

Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm -Motor grinding wheel: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding wheels diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Condition: Workshop overhauled, ready for demonstration and use, tested The DISKUS DDS 457 II CL was completely dismantled, cleaned, defective parts replaced and functionally tested. Specifications Grinding spindle: 2 pieces vertical Grinding process: Continuous process Workpiece width up to 60 mm Max. workpiece height 1-60 mm Grinding wheel diameter: 457 mm Grinding wheel rotation speed 24 m/s Workpiece feed 25 to 250 mm/min Drive power grinding wheel motor 2 x 15 kW Total drive cable approx. 35 kW Machine weight approx. 3.7 t Total space requirement approx. L x W x H 1.4 x 1.0 x 2.7 m Accessories: Replacement flanges – Errors, modifications and prior sale excepted –

Grinding wheel puller, cup wheel puller, double grinder stand puller, surface grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Manufacturer: EHS, grinding wheel dresser, grinding wheel puller -Tip height: 173 to 238 mm -Dimensions: 185/180/H180 mm -Weight: 5.7 kg

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg

grinding length: 800 mm grinding width: 200 mm workpiece height: 300 mm table adjustment: längs 850 mm table adjustment: quer 200 mm Table dimensions: 1900x450 mm table surface area: L:800 x B:200 mm grinding spindle speed: 2860 U/min spindle throat normal: 320 mm dimensions of grinding wheel: installed on machine / an M. Ø 240x26 mm dimensions of grinding wheel: bis / up to bis Ø 240 mm magnetic plate size: 630x200x100 mm feed: table quer: 0,02-0,4 mm/min total power requirement: 2,2 kW weight of the machine ca.: 1,97 t dimension machine approx.LxWxH: 2,0 x 1,4 x 2,0 m dimension coolant device LxWxH: table quer: 0,02-0,4 m

Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Regulating wheel width: 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 kg

Specifications: Grinding length: 750 mm Grinding width: 250 mm Grinding headstock/ Drive power: 5 kW Table clamping surface: 720 x 200 mm Grinding height to center spindle: 500 mm Grinding wheel: 225/250 x 25 x 51 mm Max. table load: 100 kg Power supply: 3 phases, 400 V

Knife profiling machine for producing profiled knives from a solid blank according to a template. Technical data: Grinding disc diameter max. 225mm Grinding wheel width 5mm Grinding wheel bore 60mm Tool diameter max. 290mm Tool diameter min 90mm Tool width max 230mm Grinding disc drive 1.1KW Motor speed 1420 rpm Stepless gearbox n=500...3000 rpm Grinding spindle speed n 1 = 1720 rpm n 2 = 2000 rpm n 3 = 2500 rpm n 4 = 2820 rpm Radial clearance angle (at the back) 1030 degrees Axial clearance angle (to both sides) 0.20 degrees Coolant pump 0.28KW

It is a very precise and working machine adjustment range X 400 mm, Y 250 mm, W (grinding head) 250 mm, feed X and Y 0 to 1800 mm/min, W 0 to 3000 mm/min, table 600 x 380 mm, maximum table load 200 kg, grinding spindle speeds with electric motor 9 to 45000 rpm, with air turbines up to 100000 and 160000 rpm, planetary rotation stepless 5 to 300 rpm, stroke speed of grinding spindle sleeve with quick stroke 0,5 to 12000 mm/min, stroke of grinding spindle sleeve 110 mm, diameter of grinding spindle sleeve 100 mm, NEW control: ADCOS CNC 800 (Swiss made) - RETROFIT ! http://www.adcos.ch/site/index.cfm?id_art=96324&actMenuItemID=44488&vs prache=DE read operating hours 64940, spindle hours 7633(July 2023) with dressing spindle system: KAISER C 42 DC, magnetic clamping plate , with fire extinguishing device: Kraft Bauer

Vertical axis grinding machine Mod. VAM RV 800, complete with diamond wheel holder plate (excluding wheel), diam. Mm 420 with abrasive sectors, low voltage electrical system. Automatic descent displayed electronically controlled, allows flattening cycles which include: roughing and finishing passes, flash hiding passes, head lifting at the end of the work cycle at the programmed starting point, recovery of wheel wear in sectors during a work cycle (we recommend the use of self-brightening sectors as the NC does not manage the diamond grinding of the wheel). The descent of the wheelhead is interpolated with the revolutions of the table. Quick for head up and down, automatic mast lubrication. 22.5 kw (HP 30) electrospindle, equipped with precision bearings with automatic play recovery. INVERTER for grinding wheel electro-spindle speed adjustment, display of rpm and motor absorptio ...

Max. grinding length : 450 mm Max.clamping length : 700 mm Thread diameter : 3–200 mm Thread pitch : 0,40–80 mm Max. angle pitch : -25º / +25º Grinding wheel diameter : 275-350 mm Grinding wheel width : 8-40 mm Grinding wheel bore : 160 mm Grinding wheel speed : 1550-1900 rpm Weight approx : 3500 kg

GENERAL CHARACTERISTICS, Max. grinding diameter 120 mm, Grinding wheel width 250 mm, Minimum Ø to be ground 1 mm, Ø drive grinding wheel 304 mm, Ø working wheel 508 mm, DIMENSIONS AND WEIGHT, Height 1,700 mm, Width 1,500 mm, Length 2,750 mm, Weight 4,000kg, ELECTRICAL CHARACTERISTICS, Grinding head motor power 15 Kw, Power motor power grinding head 1,8kw, Hydraulic motor power 1,1kw, Total power 20 kW, Voltage 220/380 V

Flat tangential grinding machine Brand: GER Model: RS-50/25 ->Table Maximum rectified area: 500x250mm Distance from the table to the center of the grinding wheel: 525 Table speed: 2 to 32 m/min. Maximum table travel: 550mm Maximum weight supported piece to be rectified: 300kg ->Transversal course Maximum transversal movement: 250mm Flywheel division: 0.01mm ->Vertical grinding movement Flywheel division: 0.001mm Grinding wheel measurements: 250x25x76.2mm ->Engines Grinding wheel head: 3CV Hydraulic pump: 1.5CV Transverse advance: 0.5CV Vertical advance: 0.5CV Weight: 2200kg Tank with motor for coolant. Magnetic plate. It has an original instruction manual.

: gebraucht : 2019 : 5538 : prompt, Zwischenverkauf v : Taiwan : 47800 € : 1 : 630 mm : 1000 x 400 mm : 1000 mm : 1000 x 400 mm : 1050 mm : 11000 mm : 5 - 25 m/min : 0 - 2250 mm/min : 0,001 mm : 405 mm : 0,001 - 0,04 mm : 675 mm/min : 0.001 mm : 1450 1/min : 3,7 kW : 1.5 kW : 1 kW : 5,6 kW : 4280 mm : 1730 mm : 2080 mm : 3500 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 8", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list Aut. vertical feed Servo drive for grinding wheel feed and table cross feed Hardened slide ways in all 3 axes with roller bearings Grinding wheel spindle on 4 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device with automatic compensation Grinding wheel Grinding ...

Description: machine no.: 33 operating voltage: 400 V frequency: 50 Hz , nominal current: 16 A connected load: 11 kW speed: 3000 – 8000 rpm grinding body diameter: max. 150 mm , clamping and grinding ranges: , max. workpiece diameter: approx. 250 mm , max. workpiece diameter with counter bearing: approx. 125 mm , max. workpiece length without clamping shaft: approx. 450 mm , max. workpiece length with counter bearing without clamping shaft: approx. 250 mm , max. grinding length depending on workpiece position, grinding body holder: max. 340 mm , max. grinding length at ,working programs: approx. 280 mm , tool holder: SK 50 , tool weight: max. 50 kg , travel of X-axis: 340 mm , feed rate of X-axis: 7,5 m/min , direct measuring system resolution: 0,0005 mm , travel ,of Y-axis: 240 mm , feed rate: 7,5 ...

Type: BPV 40/1500 Parameters: Manufacturer: Kovosvit Holoubkov Description: Machine in very good technical condition, after overhaul. Max. grinding length 1500 mm. Max. grinding width 400 mm Max. workpiece height 500 mm. Max. grinding wheel diameter 520 mm Machine weight 12000 kg. Magnet with a very fine pole spacing (5 mm) for high holding force and the possibility of grinding even small parts. Regulation of magnet holding force. Filtermist FX 7000 double-sided extraction. Built-in lower grinding wheel dresser.

: neu : 2024 : 5549 : September 2024, Zwischenv : Taiwan : 55440 € : 1114.34 € : 1 : 610 mm : 600 x 300 mm : 610 mm : 300 x 600 mm : 650 mm : 700 mm : 5 - 25 m/min : 0 - 2,250 mm/min : 3 - 32 mm : 320 mm : 0.001 : 5,5 kW kW : 0.74 kW : 1 kW : 1 kW : 2950 mm : 1490 mm : 2080 mm : 2200 kg : 355 x 50 x 127 mm : 1.450 U/min : 0,001 - 0,04 mm : 675 mm/min : 0,001 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser over the wheel, with compensation grinding wheel grinding wheel flange grinding wheel balancing stand (roller type) balance arbor LED machine l ...

Suitable for end machining of blanks as well as for peeling grinding of steps, for producing tips, chamfers, radii and their combination at the ends of cylindrical tools made of solid carbide, HSS and ceramic. Up to four different grinding wheels in one clamping. Accessories: NUMROTOplus single-user system software, Software NUMROTOplus touch cycles workpiece (RS/SF), Software NUMROTOplus SF cycles, Software NUMROTOplus cylindrical grinding SF 40 incl. software & hardware (hollow shaft motor), Chuck clamping cylinder pneumatic, Balancing system SA (semi-automatic) EB 500, Pneumatic workpiece clamping, Oil collecting pan, Electrostatic mist extractor., Traverse X-axis: 450 mm, X axis travel: 450 mm, Z-axis travel: 250 mm, X-axis resolution: 0.001 mm, X axis resolution: 0.001 mm, Z-axis resolution: 0.001 mm, Resolution Z axis: 0.001 mm, Resolution C-Ache: 0.001°, X-axis rapid traverse: 15 ...

Key data: 600 mm, 450 mm

CNC surface grinding machine Geibel&Hotz FS640 Z-CB Year of construction 2021 Specifications: Sanding surface (in mm): 600 x 450 Sanding area (in mm): 600 x 400 x 375 Table load max.: 600 kg Grinding spindle motor: 3.7 kW Grinding wheel, standard (in mm): 300 x 50 x 76.2 Fork funnel with 2 shaped diamonds Folding dresser Universal paper filter machine UPF 140 / 20 Cleaning pump Compact air purification device 2nd LED machine light at the top right 6 x Grinding wheel holder flat cone Pre-installation of mobile balancing device Mobile Balancer Grinding spindle motor 7 / kW Control cabinet air conditioner Oil filling The machine has a toothed belt drive in the longitudinal axis Price net free loading from location.

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type MAC 10x15 A/C TRI -Grain: see photos -Price/tax: complete -Transport dimensions: 1200/800/H600 mm -Total weight: 471 kg

Precision surface grinding machine, COSMOS 7040 SPS, grinding area 700 x 400, grinding wheel 300 x 50 mm, magnetic clamping plate 700 x 400 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take care of the installation and training on site, as well as the subsequent service.

Description: Max. grinding length: 500 mm Max. grinding diameter: Ø 300 mm Grinding wheel speed: 5.000 - 25.000 Rpm Power: 15 kW Max. auto feed: 15.000 mm/min Max. feed carriage: 21.700 mm /min Angle grinding head: 0 - 55 degrees Helical pitch: 10 - 90.000 mm Max. positioning movement of grinding head: 10 mm Approx. Onsite Dimension. (l x w x h): 4,000 x 2,700 x 2,000 mm, weight approx.: 7,000 kg

3-axis grinding machine manufactured in 2003 with immediate availability. The TACCHELLA Elektra MPC 1023 is a powerful and versatile grinding solution. It offers a maximum sanding length of 1000mm and a sanding diameter of 400mm. The external grinding headstock has a swivel range of -5° to +180°, and the internal grinding headstock provides 16000 rpm. With a weight of 6000kg, this machine is sturdy and stable. The opportunity to buy this TACCHELLA Elektra MPC 1023 grinding machine is now available. Contact us for further details.

Description: Surface grinding machine Grinding length 600 mm Grinding width 300 mm Workpiece height 340 mm Magnetic plate size 500 x 300 mm Grinding wheel diameter max. 355 mm Grinding wheel width max. 38 mm Machine weight approx. 1.8 t Space requirement approx. 2.3 x 1.6 x 1.8 m weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,600 x 1,800 mm

Description: SN 80-06-137477 model RI - OF/CNC type M 2-03-21 outer diameter 50 - 90 mm x-axis 145 mm z-axis 250 mm grinding wheel bore 12 peripheral speed max. 60 m/sec workpiece thickness - max. 20 mm total power requirement 20.00 kW Description: Cylindrical grinding machine for internal machining of intermediate rings. With Meccanodora RI-0G/CNC cage grinding machines with full enclosure the inside diameters of ball cages can be ground with high precision single-spindle grinding. The automatic loading/unloading via the integrated loader/unloader ensures maximum efficiency. System interlinked with Meccanodora 1309/CNC external cylindrical grinding machine. min./max. hole to grind: 45 - 85 mm, control: SIN 840D, total power requirement: 20 kW, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 3,500 x 3,200 mm

grinding diameter:630 mm grinding length:2000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric includi ...

grinding diameter:630 mm grinding length:2000 oder 3000 mm centre height:320 mm table speed -stepless-:0,005-5 m/min min/max. table longitudinal travel:5/ 3350 mm table speeds:8 m/min grinding spindle- cross travel:420 mm workpiece-spindlehead motor:3,0 kW output of wheelhead motor:22 kW motor internal grinding:3 kW lubrication pump motor:0,11 kW weight of the machine ca.:15700 kg dimensions of the machine ca.:H1970/B3100/L12650 mm 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 3000 with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric including cabinet  ...

internal diameter:100 mm grinding depth:160 mm swing diameter:300/450 mm centre height:290 mm max. outer diameter:300/450 mm work piece spindle speed:50-360/90-700 U/min weight of the machine ca.:2900 kg Machine size (LxWxH):2500x1750x1800 mm face grinding attachement:mit Schleifscheibe internal grinding spindle:DKF Typ SLA 60x400 mit 20.000 U/min grinding wheel dresser:auf Tisch 3 jaw chuck Ø:200 mm coolant system with magnet grate:und Wassertank frequency converter:f. stufenlose Spindeldrehzahl f. Innenschleifeinrichtung 100 % before loading warranty: none one used internal grinding machine, make: Jotes, type: SOJ 10M, year of produktion 1986

grinding length:1000 mm grinding width:550 mm workpiece height:400 mm surface area:1300x450 mm cross feed motor:0,55 kW grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4800 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. All guideways new eingeschabt on Neumaschinengeometrie. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machine repainted. Machine in perfect, produktionsbereitem state. Accessories: - Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain - Electric magnetic chuck with straight coarse / fine pole  ...

grinding diameter:600 mm grinding length:4000 mm centre height:320 mm max. workpiece weight:3000 (zw. Spitzen) kg max. workpiece weight:6000 (m. Lünetten) kg grinding wheel diameter:760 mm grinding wheel width:100 mm grinding wheel speed:45 m/sec table travel:4400 mm table speed -stepless-:10~6000 mm/min Rotation speed of workhead :8~80 1/min tailstock quill stroke:100 mm taper in tailstock-quill:6 MK spindle drive:22,5 kW Weight approx.:14,1 t dimensions:13000x2900x1800 mm CNC controller:Siemens 828D mit Schleifzyklen open steady:2 Stk./pc live center:2 Stk./pc warranty: None payment: 100% before loading

grinding diameter:600 mm grinding length:3000 mm centre height:320 mm max. workpiece weight:3000 (zwischen Spitzen) kg max. workpiece weight:6000 (m. Lünetten) kg grinding wheel diameter:760 mm grinding wheel width:304,8 mm grinding wheel speed:45 (stufenlos) m/sec table travel:3400 mm table speed -stepless-:10~6000 mm/min Rotation speed of workhead :8~80 1/min tailstock quill stroke:100 mm taper in tailstock-quill:6 MK spindle drive:22,5 kW Weight approx.:13 t dimensions:13000x2900x1800 mm CNC controller:Siemens 840D mit Schleifzyklen Scales:in X-Achse von Heidenhain open steady:optional live center:optional Stk./pc workpiece drive:variable 4 jaw chuck:optional CE-design:verlängert die Auslieferung um ca. 3 Wochen warranty: None payment: 100% before loading

grinding diameter:750 mm grinding length:2000 mm centre height:375 mm grinding wheel size:750x100x305 mm :40-250 mm tailstock-quill conus:Morse 6 table swivable ca.:4° (1:8) turning speed range - workpiece spindle:(stufenlos) 1-50 U/min grinding wheel speed:20-33 m/sec grinding wheel motor:19 kW total power requirement:ca. 41 kW

grinding diameter:630 mm grinding length:2000 mm centre height:320 mm max. workpiece weight:2500 kg swing diameter in open bench rest:40-150 mm taper in tailstock:6 MK table swivelabel +/-:6°30' ° work piece spindle speed:8-50, 50-315 (2 Bereiche) U/min grinding wheel speed:33 m/sec output of wheelhead motor:15 kW workpiece-spindlehead motor:3,0 kW total power requirement:31 kW weight of the machine ca.:12400 kg open type steady rest:2 (schwer) Stück steady fixed:2 Stück grinding wheel flange:2 Stück technical documentation:in deutscher Sprache 40 % advance payment, by order confirmation 60 % before loading the machine warranty: 12 month one general overhauled cylindrical grinding machine, make TOS, type BUT/BUC 63 x 2.000, year of production with new 2-axis CNC Teach In control K 51/2 or alternatively Siemens Sinumerik 840 D. Our general overhauling includes: regrinding and scrapi ...

grinding diameter:630 mm grinding length:5000 mm centre height:315 mm grinding wheel diameter x bore x width:750x80x305 mm grinding wheel peripheral speeds::35 m/sec grinding wheel speeds:500-1100 U/min max. workpiece weight:3000 kg weight of the machine ca.:17900 kg machine length:im Betrieb: ca. 15m

grinding length:2500 mm grinding width:700 mm workpiece height:730 mm table-size:2500 x 700 mm spindle drive motor:105 kW spindle turning speed range:50 - 3000 U/min grinding wheel width x diameter:550 x 360 mm grinding wheel peripheral speeds::35 m/sec grinding wheel hole diameter:203,2 table feed:10 - 35000 mm/min weight of the machine ca.:15 t total power requirement:150 kW dimensions of the machine ca.:8,5 x 4,2 x 3,2 m Machine with SIEMENS 840 D CNC control for 3 AXIS - automatic cutting force control I-Konstant - coolant device with 5000 ltr. tnak, paperband filtration, recooling, cleaner nozzle, chanel flashing - profile dressing device table mounted - profile pre-setting device - splash housing with sliding doors and conector for exhauster - electronic handwheel

grinding length:1250 mm grinding width:400 mm workpiece height:550 mm workpiece weight:750 kg table-size:1720 x 400 mm magnetic clamping plate:1250 x 400 mm dist. center of grinding spindle - table:750 mm turning speed range - grinding wheel:3000 U/min Length movement of the table:1300 mm grinding wheel size:Ø 400 x 50 x 127 mm switchgear cabinet:inkl. hydraulic power unit:inkl. coolant:inkl. voltage:380 V table load:max. 1100 total power requirement:13,8 kW weight of the machine ca.:6000 kg dimensions of the machine ca.:5000 x 3400 x 2400 mm Documents:inkl.

grinding length:1500 mm grinding width:700 mm workpiece height:580 mm table load capacity:2380 kp table speed -stepless-:5 - 35 m/min grinding wheel dia. x width:500 x 100 x 203 mm grinding wheel motor:18 kW speeds::stufenlos elektronisch total power requirement:35 kW weight of the machine ca.:12 t dimensions of the machine ca.:5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin