grinding used for sale

Description: Fabrication number: 269 Center height above table: 105 mm Center width: 550 mm Largest sanding diameter: 200 mm Largest sanding length: 400 mm Largest clamping diameter: 200 mm Largest clamping length: 550 mm Table: Clamping surface: 800 x 112 mm Largest longitudinal movement: 400 mm Can be swiveled to 2 sides: 180° Adjustability of the grinding spindle slide: Transverse: 250 mm Vertical: 300 mm Can be swiveled: 360° Sanding spindle: Pivoting of the spindle head to 2 sides: +/- 30° Smallest/largest distance from the center of the grinding spindle to the top edge of the table: 75/375 mm Grinding wheel: Largest grinding wheel diameter: 150 mm Largest width: 20 mm Bore: 64 mm Flange diameter: 80 mm Cone diameter: 25 mm With machine accessories as shown in the pictures Machine dimensions: 1220 x 1100 x 1400 mm weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,6 ...

DELTA LC 400 Rotary Table Grinding Machine -Grinding diameter 400mm -Grinding height approx. 210mm -Speed range - 2850 rpm -Total drive 3 KW -Grinding wheel dimension 200x80mm -Fine-tuning -Machine housing -Coolant device -Documentation Dimensions: Pglochi7df LxWxH 1.1x0.9x1.7Meter / Weight 700Kg

Description: Max. diameter at the centers: 250 mm Max. distance between workpiece carrier head and tailstock: - A090010 CM4: 620 mm - A090011 ISO 40: 620 mm - A090012 CM5: 585 mm - A090200 CM5/ISO 50: 575 mm Max. distance between tailstocks: 670 mm Table surface: 950 x 120 mm Orientation on the table: ± 90 ° Stroke of the longitudinal table: 500 mm Vertical movement of the wheel holder: 230 mm Transverse movement of the wheel head: 230 mm Alignment of the wheel head: 360 ° Tiltable head: ± 20 ° Max. grinding wheel Ø: 150 Max. grinding wheel Ø: 180 Right tailstock CM N°: 2 The length can be ground from the outside: - A090010 CM4: 395 mm - A090011 ISO 40: 395 mm - A090012 CM5: 360 mm - A090200 CM5/ISO 50: 350 mm Speed of the grinding spindle: 3000 ÷ 6000 rpm Internal spindle speed: 15000 ÷ 30000 rpm Motorized speed of the working head: - A090010 CM4: 95 - 160 - 250 rpm - A090011  ...

Manufacturer GER Model CM 2500 CNC Year 2000 CNC FAGOR 8055 Characteristics Distance between centre 2.500 mm. Centre height 300 mm Max grinding diameter 595 mm. Max weight between centers 2.000 kg. Max weight grinding on air 350 kg. Longitudinal movement Max programable speed 6.000 mm/min. Min programable increase 0.001 mm Cross movement Max.programable speed 6.000 mm/min Min programable increase 0.001 mm. Various Max. grinding wheel size Ø 500/80 mm. Grinding wheel Cutting Speed 45 m/s Parts Holder Centre Cone C.M.6 Centre Cone Tailstock C.M.6 2 Steady Rests INCLUDED Machine weight 12.000 kg.

Double grinding machine TS 300 SD P with SUCTION, machine stand, emergency stop push button and brake smooth-running, maintenance-free motor Protective covers closed at the sides Stable, adjustable workpiece supports High level of safety comfort thanks to adjustable spark deflectors suitable for grinding, deburring and sharpening tools of all kinds, metal profiles, etc. Motor Circuit Breakers and Undervoltage Trippers Double-sided spark/eye protection connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine 12 months warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm 230 - Speed (1/min): 1250 - Three-phase motor 400 V / 2.2 kW: operating mode S2-30 min (short-term operation) - Extraction motor 0.55 kW, suction power 350m³/h - Weight (kg): 90 Shipping time:immedia ...

- Grinding length: 600 mm - Grinding width: 400 mm - Workpiece height: 400 mm - Magnetic table: 600 x 350 mm - Dressing device: yes - Grinding wheel Ø: 300 mm - Grinding spindle speed: 1400 rpm - Total power: 6 kW - Machine weight: 3500 kg - Space requirements (W x D x H): 2.0 x 1.5 x 2.2 m Details Automatic delivery in Z, fully functional Accessories Documentation, Machine Feet

Machine : Grinding Wheel Flange Make : and grinding wheels Type: Inner taper mount Pos. Text Stk. φ φ H- Schleifsφ Schl. B φ A 3 58 74 83 400 approx. 320 B ELB 4, 50, 62, 60, 127, 30-50, 170 C ELB 4 44 60 68 127 20-40 180 D 1 45 60 70 127 30-60 190 E 2 27 34 44 approx. 85 -30 130 F 1 45 60 75 127 -50 190 G 1 29 35 44 ca.85 -30 146 H 1 45 60 75 ca.135 -60 180 I 2 45 60 75 127 30-60 180/190 J 2 27 43 56 127 -40 175 K 3 32 32 55 127 20 158 S Grinding wheel : NEW – for a centerless cylindrical grinding machine, Dilvmit+Kircher D- 10C 100/8 Ps V03 , 406x200x203mm ( 270x25x25) Price: € 200,-

Description: Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and low-noise operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 U / min Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m weight approx.: 12 kg, Approx. Onsite Dimension. (l x w x h): 700 x 400 x 300 mm

Key data: 1100 mm, 1 , 200 mm

Calibration and fine sanding machine, wide belt sanding machine Kundig Brilliant with electronic segment sanding pad, inclined sanding unit and lacquer sanding. A video of the machine running can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding Bind machine with combination unit and electronic link pressure beam Edge segments can be switched on and off Segment width of pressure beam 35mm Pneumatic Calibration Roller Grooved Rubberized Roller with Grain Compensation Drive motor 11kW, infinitely variable cutting speed 3 - 15 m/s by frequency converter Webbing feed infinitely variable from approx. 3 to 15 m/min Strip blow-off device workpiece-controlled Constant table height approx. 900mm due to adjustment of the upper part of the machine, thus can also be integrated into grinding lines Feed bel ...

grinding diameter:500 mm grinding length:2000 mm centre height:251 mm max. workpiece weight between centers:500 kg workpiece spindle head::5 MK tailstock quill taper MT:4 MK Grinding wheel diameter / width / bore:400/100/127 mm Grinding wheel motor:4 KW Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

:FS-D-NC 120200 | FS-D-NC 120300 | FS-D-NC 120400 | FS-D-NC 120500 grinding length:2000 | 3000 | 4000 | 5000 mm grinding width:1200/1600 mm distance spindle nose and table:1000 (Option 1200) | 1000 (Option 1200) | 900 (Option 1100) | 900 (Option 1100) mm max. table load:5200 | 6340 | 7600 | 8700 kg table-size:1200 (1600) x 2000 | 1200 (1600) x 3000 | 1200 (1600) x 4000 | 1200 (1600) x 5000 mm table speeds:1~25 m/min table guideways:V-Führung automatic cross feed adjustable:0.1 - 40 mm/Hub rapid traverse cross:900 mm/min cross feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mm cross feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mm rapid traverse vertical:300 mm/min autom. vertical feed:0.001 ? 0.1 mm vertical feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mm vertical feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mm spindle speed:1100 1/min ...

:FS-NC-50AHR | FS-NC-60AHR | FS-NC-70AHR grinding length:1020/1520/2020 mm grinding width:500 | 600 | 700 mm Distance spindle center to table:600 (Option 800, 1000) mm table surface area:500x1000/500x1500/500x2000 | 600x1000/600x1500/600x2000 | 700x1000/700x1500/700x2000 mm table load capacity:800/1000/1000 | 1200/1400/1400 | 1500/1700/1700 kg table speed -stepless-:5-25 m/min Auto. cross feed increment:0,5~20 mm/min rapid traverse cross:900 mm/min autom. vertical feed:0,001~0,999 (Option) mm grinding wheel speeds:1450 U/min dimensions of grinding wheel:405x50x127 mm spindle drive:7,5 (Opt. 11) kW weight of the machine ca.:6000/7200/8400 | 6300/7500/8700 | 6600 /7800 /9000 kg machine width/height:4600x2300 | 4600x2450 | 4600x2550 mm machine length:4600/4800/6000 mm

:FS-C 80150/100150AHD | FS-C 80200/100200AHD | FS-C 800300/100300AHD | FS-C 800400/100400AHD grinding length:1500 | 2000 | 3000 | 4000 mm grinding width:800/1000 mm distance spindle nose and table:800 [Option: 1000] | 800 [Option: 1000] | 800 [Option: 1000] | 700 [Option: 900] mm max. table load:800x1500 (2000kg)/1000x1500 (2400kg) | 800x2000 (2650kg)/1000x2000 (3200kg) | 800x3000 (3950kg)/1000x3000 (4800kg) | 800x4000 (5000kg)/1000x4000 (5500kg) kg table-size:800/1000x1500|800/1000x2000 | 800/1000x3000 | 800/1000x4000 mm table speeds:3?25 m/min table guideways:V- und Flachführung automatic cross feed adjustable:0.5?20 mm/Hub rapid traverse cross:900 mm/min cross feed on handwheel:5 (Umdrehung) / 0.02 (Grad) mm rapid traverse vertical:240 mm/min autom. vertical feed:0.001 ~ 0,1 mm spindle speed:1450 1/min dimensions of grinding wheel:406 x 50.8 x 127 mm spindle drive:7,5 (11 Opt.) kW dr ...

grinding diameter:80-260 mm total power requirement:50 kW weight of the machine ca.:15 t dimensions of the machine ca.:12,5x3x2 m workpiece length - max.:10000 mm min. workpiece diameter:80 mm max. workpiece diameter:260 mm grinding wheel diameter:350 & 400 mm For external cylindrical grinding. Rebuilt from a conventional lathe with a CNC controlled grinding support. Year of manufacture Basic machine: 1965 / CNC conversion: 2013 KSS - System: Knoll compact filter unit KF110/700

drill diameter:5,,,,40 mm drilling length:600 mm lip angle:90-150 ° total power requirement:4,5 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill

internal diameter: mm grinding depth: mm centre height:175 mm grinding length:120 mm longitudinal and cross slide:300 grinding wheel diameter:10 mm grinding wheel speeds:90.000 U/min Z-axis:300 mm Incl. automatic feeding B-Axis

grinding length:600 mm centre height:180 mm swing dia.:360 mm workpiece weight:80 kg max. dia. of grinding wheel:500 mm grinding wheel width:80 mm grinding wheel hole diameter:203,2 mm peripheral speed:45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system.

grinding length:3150 mm grinding width:800 mm workpiece height:650 mm table surface area:3.150 x 600 mm magnetic clamping plate:3.000 x 600 mm dimensions of grinding wheel:450 x 100 x 127 mm total power requirement:22 kW dimensions of the machine ca.:11 x 3 x 2,4 m surface grinding machine, CNC Flachschleifmaschine, coolant device 2.500l, magnetical adhesive force control, semi automatic balancing system,

Surface grinding machine SAIM E4 Hand-operated surface grinder for quick overgrinding/tuning, etc. Grinding path X-axis 220mm /manual Grinding path Y-axis 100mm/manual Grinding path Z-axis 150mm/manual Magnetic Plate / New 250x125mm Btrt79jxow Coolant system Dimensions: LxWxH 0.8x0.8x1.7 meters / Weight 500Kg

Technical data: Displacement of the grinding head: .60 mm Axis Shift: .50 mm Total power requirement: 25 kW Grinding pressure: 10-1000 N Grinding wheel diameter: 650 mm

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

Technical data: Displacement of the grinding head: .60 mm Axis Shift: .50 mm Total power requirement: 25 kW Contact force: 10-1000 N Grinding wheel diameter: 650 mm Grinding wheel width: 8-20 mm

Gr. Grinding length: 600 mm gr. Grinding width: 350 mm table - longitudinal movement: 35-600 mm grinding wheel dimensions: 300 x 50 x 76 mm wheel speeds: 1440 / 2890 RPM elect. Supply: 380 V, 5/6 kW space: 1950 x 1650 x 2200 mm weight: approx. 2500 kg

Grinding wheel diameter x W: 200 x 32 mm Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 RPM: 2850 RPM S1 engine power output 100%: 0.90 kW Motor power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight: approx. 25 kg Scope of delivery: Roughing wheel K 36 Simple disk K 80 Spark cover on both sides Workpiece support Base extra charge available. Special price including delivery to 1 address Germany (Mainland).

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

1 piece flat grinding machine COSMOS E 7040 NC grinding range 700x400x350mm electric magnetic clamping plate 700x400mm single set-up, fixed for straight-straightering with compensation Programmable display 4.7 . . . . -level grinding spindle drive Universal paper strip filter; as good as new, ready for use

Gr. Grinding length: 620 mm gr. Grinding width: 250 mm table size: 200 x 620 mm grinding wheel dimensions: 200 x 220 x 51 mm Electr. Supply: 380 V, 1/1.8 kW space: 1650 x 1450 x 1800 mm weight: 1350 kg

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data grinding diameter: 1.0 - 12.7 mm Grinding length: 0 -75 mm Helix angle: 0 - 89 ° Tool lenght: 30 - 200 mm Axial motion: Crosswise: 87 mm Longitudinal: 80 mm Vertical: 38 mm Collet attachment: 15 W Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1800 kg Overall dimensions machine: Length: 1830 mm Width: 2040 mm Height: 2100 mm Various accessories: Automatic loading: 200 - 500 pce Loading roboter Description: Chargement automatique des forets ou fraises Plateaux de chargement de 200 à 500 pièces

YOM 1987. Worked not more than 10 years, one shift Grinding length 3000 mm Grinding width 1700 mm Workpiece height 1600 mm Distance between columns 1860 mm Grinding heads- 2 Table surface 3230x1600 mm Number of slots of the table 10 pcs Permissible table load with evenly distributed load 5000kg/m Weight of work-piece 15t Table travel speed 1-40m/min

Grinding units Grinding belt length mm: 8000 Grinding width mm: 120 Feed max: 2200 m/min Manipulation unit Max machining range mm: 2100x650x400 Total connection kW: 7.2

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 65 mm Distance between centres: 250 mm Table length: 470 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 70 mm Vertical adjustment of the table: 50 mm Table swivels: 360 ° Grinding spindle speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm

Sell a tool grinding machine especially for grinding stools or similar. One side is equipped with a chuck that can be adjusted in all directions. The whole thing is on a cross support Dimensions 16001000'1500mm High Clamping range chuck 4040mm Grinding wheels diameter 175mm50mm and 320mm50mm Voltage probably 110V

6 axis CNC centerless grinding machine MIKROSA KRONOS MX Grinding wheel width 250mm (max) Grinding wheel dia 610mm (max) Fixed and rotary wheel dresser diamond CNC Siemens 840D 6 axis Under power in our warehouse Mimu Machine Tools (Italy)

Tool grinding machine Walter UWS30 CY - original condition - Width: 120cm - Height: 140cm - Depth: 100cm - with electric stroke adjustment - Sub-machine, 8 grinding shots - Grinding wheel pulling device - Electrical documentation + equipment Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Drill diameter maximum: 25 mm Drill diameter minimum: 2 mm MACH-id    5177 MAKE         Cuoghi Italia TYPE           Ep 25 YOP             1997 SPECIFICATIONS Cylindical / Surface / Other       Sharpening twist drill Grinding diameter Ø      1,5 to 25 mm        Grinding length       Edge 1 - 6 mm Grinding wheel size        40 Gr. - 180 Gr. mm kW power on spindle         0,38 kW DIMENSIONS Length         740 mm Width           680 mm Height        1170 mm  

Center distance: 0 mm Grinding head Z-axis: 280 mm Center height: 0 mm CNC Brand: Fanuc MAKE   Schneeberger TYPE     NORMA CFG YEAR    2007 SPECIFICATIONS Controll    Fanuc Cylindical / Surface / Other   5 Axis Tool grinder Grinding length   C = 340 Gr mm X - Travel    X = 380 mm Y - Travel    Y = 280 mm Z - Travel     Z = 280 mm Electro magnetic table      A = 360 Gr mm Grinding wheel size           HSK 50 - 200 mm mm kW power on spindle        7.5 kW kW Spindle speeds / ranges     9000 Rpm DIMENSIONS Length     2400 mm Width      2400 mm Height     2200 mm Schneeberger Gemini DMR 5 Axis cnc Tool grinder

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: Fanuc CNC Model: 160iMB MAKE   Schneeberger TYPE    GEMINI DMR YEAR    2007 SPECIFICATIONS Controll    FANUC 160i MB Cylindical / Surface / Other   5 Axis Tool grinder Grinding length   C = 240 Gr mm X - Travel   X = 400 mm Y - Travel   Y = 300 mm Z - Travel   Z = 280 mm Electro magnetic table    A = 210 x ISO 50 mm Work piece weight    Resolution = 0.0001 Gr Kg Grinding wheel size    50 to 250 mm kW power on spindle   15 kW Spindle speeds / ranges   10.000 Rpm DIMENSIONS Length   4000 mm Width    3000 mm Height    3200 mm incl. FANUC loader robot LR MAte 200 iB 3  Lincl. 8 position head changer

Description Universal flat grinding machine of the elb brand suitable for tooling, fixture construction, training and mould making Travel: 750 x 320mm Table size: 600 x 300mm Technical data Grinding length 750mm Grinding width 320mm Workpiece height 500mm Table size 600 x 300mm Connection 50Hz 380V Engine 4.5KW Machine weight approx. 2650kg Dimensions 2000 x 1650 x 2110 mm

Working range Diameter of the legs: 350 mm Rotation diameter: 360 mm X-trajectory: 725 mm Z-trajectory: 547 mm Y-trajectory: 307 mm Main spindle Spindle flange in accordance with DIN 55026: size 8 Spinning bearings - ? front: 120 mm Maximum speed: 6000 rpm Main drive AC motor 40% ID: kW 45 Maximum power: 58 kW Full power from spindle speed: 480 rpm Moment 40% ID: 480 Nm Maximum moment: 620 Nm Transport drive High speed X/Y/Z: 45/45/30 m/min Transport force in X/Y/Z: 5,5/11/11 KN Ball roller spindle in X/Y/Z: 40 mm Revolver star Intake cylinder shaft DIN 69880: 4 gang Shaft ? 40 mm Grinding spindle 1: HSK C63, U/min 9.000, kW 19 Grinding spindle 2: HSK C32, U/min 42,000, kW 7.5 hydr. Grinding spindle: U/min 32,000, kW 0.9 Electrical equipment Operating voltage: 400 V Control voltage ? DC: 24 V Control voltage ? AC: 230 V Frequency ? 50 Hz Sizes and weights Length: 5060 mm Width: 1960 mm H ...

Grinding spindle to Hauser coordinate grinding machines. 2 electric spindles with mounting shaft 3mm and 1 compressed air grinding spindle for receiving shaft 3mm. All spindles are tested for function.

Code 0736 Description hydraulic surface grinding machine Make ORION ( HAHN & KOLB ) Model 308 Serial No. 5128 Year 1978 Tablesize 1520 x 300 mm Table grinding size L x B x H 800 x 350 x 500 mm Magnetical plate size L x B 800 x 300 mm Speed table movement 2 - 30 m/min. Rapide vertical movement 0,4 m/min Max. distance table – centre grinding wheel 640 mm Max Grindingstone diameter x Wide x Taper 300 x 50 x Ø 76 mm Spindel power 5,5 and 7,5 kW Spindel speed 1440 and 2880 rpm Weight 3500 kgs Motor power 5,5 / 7,5 kW – 380 Volt Accessoiries Elec. Magneticplate 800 x 300 mm Coolant Condition Machine is in good condition

Internal grinding machine make JUNG type BS 22kl. Sandable hole: 14 mmGrindable bore: 150 mmGrinding length: 250 mmWorkpiece spindle bore: 44 mmPivoting headstock: 30 °Gr. distance of workpiece spindle - grinding support: 935 mmSpeeds workpiece spindle: 58 - 85 rpm.: 120 - 170 rpm.: 246 - 348 rpm.Weight approx. 2200 kgPower requirement: 8.01 kWWith:- DIAFORM grinding wheel diaform unitused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

internal diameter: 2 - 40 mm grinding depth: - mm swing diameter: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW magazine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 340 mm clamping length max.: 1000 mm grinding length: 800 mm turning diameter over bed: 640 mm turning diameter over slide rest: 360 mm turning length: 800 mm centre height: 320 mm centre distance: 1000 mm spindle turning speed range: 3 - 240 U/min spindle taper: MK 5 no. of T-slots: 1 - 40 Stück number of teeth: 1 - 40 spindle diameter in front bearing: 140 mm main spindle bore: 45 mm module: 10 / 20 total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,0 x 2,0 x 1,5 m Relieving Lathe with grinding attachment for grinding hobs. Full profile Cutting: max modul 10 (2,54DP) Pending method max. Modul 20 (1.27 DP) pitch 60-240mm Spiral 150-600cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 200 mm max. module: 10 min. module: 1 profile depth: 25 mm x-axis: 630 mm y-axis: 400 mm z-axis: 190 mm U-axis: 80 mm a- axis: 360 ° b-axis: +/- 30 ° max.helical angle: 30 ° grinding wheel diameter: 250 - 350 mm spindle speeds (infinitely variable): 1500 - 2800 U/min grinding slide feeds: 6000 mm/min center distance betw. workpiece-tool min/max.: pitch max.: 9000 mm pitch min.: 10 mm electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 38 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,8 m horizontal Profil Gear Grinding Machine for Spur and Helical External Gears. Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with: - CNC Control FANUC 0i-MF -- for 6 Controlled Axis (4 simultaneously) - Gear Measuring System - Chip and Sludge Removal System - Pape ...

x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter max.: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 grad grinding spindle slide - vertical movement: 110 mm stroke speeds: 0 - 6 m/min. grinding spindle speed: bis 50.000 U/min. peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. dia. of grinding wheel: 800 mm max. width of grinding wheel: 250 mm grinding table: swivable: Grad total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Sided Finegrinder, Dresser, Coolant Device, older M. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75,0 mm band length: 2.000 mm band speed: 30 m/sec grinding width: 75 x 430 mm engine output: 3,0 kW weight: 75 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.