128,440 used machines on RESALE, but how to find them? Machine Search
1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel: 400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder
Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T
Key data: 400 mm
CNC Universal Cylindrical Grinding Machine with Internal Grinding Device External and internal grinding AZ Model RUX 1800 Year of manufacture 2018 Siemens Sinumerik 840D controller Grinding diameter 400 mm Center width 1900 mm Workpiece weight without steady rest 650 kg Grinding wheel diameter 660 x width 100 x bore 305 mm Grinding wheel spindle speeds 300 - 1500 rpm. Manually rotatable grinding wheel head 0 - +20° Internal grinding spindle Grinding wheel size 115 x 49 x 55 mm X-axis 480 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. Z-axis 2740 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. HEADSTOCK Speeds 5-400 rpm. Bezel SMW AUTOBLOK Premium Line Coolant Setup Offer number V-7059
Key data: 6000 mm, 2200 mm, 2000 mm
CNC Guideway Grinding Machine Waldrich Coburg Way Grind 2000AC Year of construction 2013 Siemens 840D controller Table width 2,000 mm Grinding width 2,200 mm Distance between stand covers 2,200 mm Grinding height 2,000 mm Grinding length 6,000 mm Table longitudinal travel 6,825 mm Table load 8,000 kg/m Total table load max. 20,000 kg Max. grinding height: Universal grinding head 2,000 mm Circumferential grinding head 1,925 mm Table speed 1.1 - 1.2 m/min. - max. 10-14 m/min. Positioning accuracy +/- 1 mm Circumferential grinding head: Max. drive power 50 kW Spindle speeds 500 - 1100 rpm Grinding wheel dimensions: Diameter (max.) 600 mm Width 150 mm Inner diameter 150 mm Universal grinding head Drive power (max). 22 kW Spindle speeds 500 - 2500 rpm. Grinding wheel dimensions: Diameter (max.) 600 mm Width 100 mm Inner diameter 250 mm Gri ...
Hydraulic ruler holder, Automatic grinding wheel balancer, Cover, Hydraulic working grinding wheel cover, Equipment AEROEL measurement, Hydraulic table locking, Hoist for 1,000 kg, Refrigeration in electrical cabinet, Panel tire, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min / max to grinding: 3/200 mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, No. of regulating wheel speeds: Infinitas, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Dressing (auto / manual): Automatic - CNC, Diamond cutting (auto/manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto / manual): Automatic ...
Key data: 1350 mm, 3 , 170 mm
SPECIFICATIONS: Machining width: 1350 mm Processing height: 170 mm Sanding belt unwinding: 2620 x 1350 mm Digital touchscreen control 2 15 kW motors COMPOSITION: I Calibration roller Ø 160 (90 sh) II Calibration roller Ø 170 (60 sh) III Roller + Pad Ø 150 (30 sh)
Grinding machine Heesemann type EH52.13 Lw/Lk Bw Specifications: • Grinding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 2 • Longitudinal band: 2 • Contact roller diameter = 200 mm: 1 /15 kW • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 12 m/min. • Sanding belt length longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: tested, in stock
"The machine from 1992 is still in productive use and will be available from week 35." More details please on request!
Control Siemens Sinumerik 840D Max. workpiece diameter: 250 mm Max. workpiece length: 1500 mm Max. workpiece weight: 150 kg Internal grinding device Paper Belt Filter Centering tip Diamond dressing tile Grinding wheel change aid
Grinding wheel dimensions (od x id x width): Ø406 x Ø229 x 254 mm, Ø min/max to be rectified: 125 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø280 x Ø165 x 254 mm, Working wheel motor power: 30 HP, Total power: 34 hp, Dimensions: 2600 mm long x 1200 mm wide x 1200 high, Weight approx.: 5.500 Kg
Grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min/max to be rectified: 1.5 / 125 mm, Regulating wheel width: 355 mm, No. of regulating wheel speeds: infinite, Dressing speed: 225 min1, Dive (auto/manual): 254 mm, Regulating wheel dimensions (od x id x width): Ø355 x Ø203.2 x 254 mm, Maximum length to be rectified in plongeé: 254 mm, Grinding wheel head motor power: 30 kW, Power motor head regulating wheel: 3 Kw, Hydraulic motor power: 0,37 kW, Long: 5.175 mm, Width: 2.950 mm, Tall: 2.120 mm, Weight: 8.375 kg
Grinding machine Heesemann type EH31.11 Lk Bw Specifications: • Grinding width (mm): 1100 • Workpiece thickness (mm): 3 - 150 • Total grinding units: 1 • Longitudinal band: 1 • Calibration roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate varnish sanding • Table height constant •Carpet • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed: 3 - 11 m/min. • Sanding belt length longitudinal unit (mm): 1,900 x 1,120 • Pressure beam: CSD system, electromagnetic, wear-free • Availability: tested, in stock
Rectifieuse par coordonnées CNC HAUSER S40-400 CARACTÉRISTIQUES TECHNIQUES: Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] INFORMATIONS COMPLÉMENTAIRES : x1 pack H ...
Rectifieuse par coordonnées CNC HAUSER S40 400 CARACTÉRISTIQUES TECHNIQUES : Course axe X : 650 [mm] Vitesse maxi. course axe X : 4000 [mm/min] Vitesse avances de travail axe X : 0 - 1800 [mm/min] Course axe Y : 450 [mm] Vitesse avances de travail axe Y : 0 - 1800 [mm/min] Course axe Z : 130 [mm] Vitesse mini. course axe Z : 0.5 [mm/min] Vitesse maxi. course axe Z : 12000 [mm/min] Fréquence course axe Z : max. 4 [Hz] Course axe W : 500 [mm] Vitesse axe C (planétaire) : 5 - 250 [rpm] Vitesse maxi. course axe W : 800 [mm/min] Course axe U (avance radiale) : 5.5 [mm] Distance entre colonnes : 750 [mm] Longueur table : 770 [mm] Csbn Ua Hjwu Dwpe Rwjrd Largeur table : 630 [mm] Passage libre entre le moteur de meulage et la table : 585 [mm] Poids maxi. admissible sur la table : 500 [Kg] Tension d'alimentation : 400 [V] Poids : 4550 [Kg] ÉQUIPEMENTS INCLU ...
Key data: 318 mm, 648 mm
JONES & SHIPMAN SUPREMA EASY 650 UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER (2010) Table: Swing:... 12.5" Distance Between Centers: 25.5" Table Travel 29.5" Max. Traverse Speed . 472" IPM HPG Increments .. 0.00005", 0.0005", or 0.005" Table Swivel 18 Deg. CCW, 16 Deg. CW Wheelhead: Total Infeed Travel:. 10.236"" Max. Speed .. 236" IPM Minimum Programmable Increment .. 0.00005" HPG Increments .. 0.00005", 0.0005", or 0.005" Swivel Range 190 Degrees CW 45 Deg. CCW External Grinding Wheels: Grinding Wheel Size, L.H. Standard:.. 14" x 2"W x 5"B R.H Standard: .. 12" x 1"W x 5"B Spindle Speeds (3):.. 1773, 2069 & 2400 RPM Motor Power: 5.5 H.P. Headstock: Swivel:.. 15 Degrees CW 90 Deg. CCW Speed, Infinitely Variable:.. 30 to 450 RPM Centers, Standard/Reduced ... #5 MT/#3 MT Approximate Weight: . 11,000 Lbs. Equipped With Internal grinding wheel attachm ...
Manufacturer: Kuhlmeyer Model: Double Sandbelt Machine Year of Manufacture: 2019 Condition: Fully Operational Find more here - / Contact us at -
Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T
Key data: 4000 mm, 1560 mm, 32
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...
Used grinding machine Vollmer CABG 50U – built in 1995 – Very good condition For sale is a fully automatic gang saw sharpening machine from the quality manufacturer Vollmer. The machine is in very good condition, is fully functional and can be used immediately. Ideal for sawmills or woodworking companies with regular sharpening needs. Specifications: Model: Vollmer CABG 50U Year of Make: 1995 Machine Type: Automatic Gang Saw Blade Sharpener Condition: Very good, regularly serviced Saw blade width: Up to approx. 200 mm Saw blade length: Up to approx. 1650 mm Rake angle adjustment: Approx. -10° to +25° Tooth pitch: Adjustable (depending on the type of saw blade) Abrasives: CBN or diamond grinding wheels Grinding cycle: Fully automatic incl. infeed and return Control: Electronic with program selection Cooling: Integrated coolant supply Connected load: 400 V / 50 Hz ...
Surface grinding machine, Asyst PNC100 CNC [ELB], 600200, wheel 300 mm 40, The machine is in our warehouse in Gussago BS.
Key data: 762 mm, 3048 mm, 813 mm
Minakuchi CNC Cylindrical Roll Grinder Year of Manufacture: 1990 Control: Fanuc Series O-GC (parameters need reloading) Technical Specifications: • Max. Swing: 32” (813 mm) • Distance Between Centers: 120” (3048 mm) • Max. Grinding Diameter: 30” (762 mm) • Grinding Wheel Size: 24” x 1.968” x 10” • Max. Grinding Wheel Width: 1.968” • Spindle Speeds: 1410 / 1530 RPM • Grinding Wheel Motor Power: 30 HP • Workpiece Weight Capacity: 20,000 lbs (approx. 9,070 kg) • Machine Weight: Approx. 30,000 lbs (13,600 kg) Equipped With: • Fanuc Series O-GC CNC Control • Remote hand wheel • Control Panel with Jog / Auto / Handle Modes • Spindle inching, feed hold, emergency stop, ZRN • Taper and crowning grinding capability • Wheel head motor • Work head & tailstock • Work rest supports • Extra wheel hub • I. ...
Key data: 585 mm, 4064 mm
JARBE Universal Cylindrical Grinder Year: 1981 Technical Specifications & Features: • Swing Over Table: 23″ Distance between centers 160” • Hydraulic Table Traverse • Swiveling Table for Taper Grinding • Universal Workhead • Universal Wheelhead • Grinding Wheel Capacity: 20″ • Includes 2 Workrests • Equipped with Coolant System • Electrics: 440 Volt
Buispolijstmachine Voor buizen tot diameter 200 mm
PALMARY OCD-3260 CNC grinding machine was built in 2020 by the Taiwanese company Palmary Machinery Co., Ltd. The machine, designed to grind holes and rotary surfaces with a maximum diameter of 320 mm, offers excellent machining precision and efficiency for many years of intensive operation. To achieve this, a number of state-of-the-art components are used, such as a specially constructed spindle made of high-quality steel alloys which is mounted on precision bearings. In turn, the design of the grinding wheel spindle uses special hydrostatic bearings, which achieve high operating speeds with no friction between the surfaces. This eliminates heat energy and thus the creation of deformations. The working head, driven by a powerful servomotor, rotates in a range of -30° to +90°. All guideways are lubricated by an advanced automatic hydrostatic system, ensuring, among others, extremely ...
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Dimensions: 4600 mm Length x 2400 mm Width x 2050 mm Height, Weight approx.: 6. ...
Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5 / 100 mm, Ø min / max to grinding: 1.5 / 100 mm, Min/max speed of regulating wheel (r.p.m.): 10 / 250 rpm, Regulating wheel width: 200 mm, Dimensions of the regulating wheel (OD x ID x W): Ø 270 x Ø 140 x 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Maximum length to be rectified in plongeé: 200 mm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel head motor power: 15 kW, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Tall: 1420 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1300 mm, High: 1420 mm, Weight: 4200 kg
Max distance between points: 1000 mm, Max travel Z axis: 650 mm, Max travel X axis: 254 mm, Height of points: 175 mm, Max. diameter to be rectified: 350 mm, Main engine power: 7.5 Kw, Max. piece weight: 130 Kg, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi-TF PLUS, Grinding wheel dimensions: Ø500 x Ø203 x 80 mm, Angle of inclination of the work wheel head: + / -8.5°, Long: 2500 mm, Width: 2300 mm, Height: 2000 mm, Weight approx.: 3500 Kg
Key data: 450 mm, 1500 mm, 225 mm
Stock number: 3995 CNC CYLINDRICAL GRINDING MACHINE Manufacturer: KELLENBERGER, Type: KEL-Varia 225 - 1500 Machines NO.: 650533, Year of manufacture: 2002 Specifications: Grinding length 1500 mm Gr. grinding diameter 450 mm Z-ash 1650 mm X-ash 320 mm Caschen 0.001 degree B ash 0.001 Large stone diameter 500 x 80 x 203.2 mm Control Heidenhain 1830 m Fabr. Accessories: Cooling water system. Grinding hubs 2 pcs Weight: 6000 kg
Grinding length 600 mm Grinding width 320 mm Workpiece height max 500 mm Table movement longitudinally 750 mm Table movement transverse 340 m Grinding wheel diameter 350 mm Grinding wheel width 40 mm Spindle speeds 1500 rpm Rapid traverse vertical 400 mm/min Power 3,7 kw Automatic delivery Magnetic disk Coolant Setup Weight 2500 kg
Name: CNC cylindrical grinder Machine type: Preise TT60-20L-C1 Machining size range - diam.: 600x2000mm Controller: Fanuc Series Oi Mate-MD
Profile belt sanding machine, PS0 Rasprofil from Zimmermann with many accessories Sanding machine with swivel table and additional equipment for rasps. Ideal for use in model making and mould making. For precise grinding of contours. All settings with clamping lever and fine adjustment. Drive motor 400Volt, 1.1kW Table can be swivelled up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400mm Fold-down upper extraction arm for sanding large parts. By snapping the free-standing profile rail into the upper part of the machine, a high angular accuracy can be achieved. Including three profile turning rails 15, 30 and 40mm (straight and radius) In addition, some sanding belts, see photos Three unused rasps. Suction connection 80mm Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motor ...
Grinding area: 600 x 400 mm Magnetic table Coolant tank various grinding wheels
Grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min/max to be rectified: 1.5 / 75 mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum length to be rectified in plongeé: 160 mm, Grinding wheel head motor power: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, Tall: 1.440 mm, Weight: 3,000 Kg approx.
Offer 73066 Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface grinding opening approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact washer B 150 / D 200 mm - Drive pulley B 150 / D 200 mm - Drive 400 V / 3 kW - Working height adjustable - separate mot. Dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Space requirement para. approx. W 750 x H 1250 x D 750 mm - Weight approx. 180 kg
Distance between points: 1000 mm, Height of points: 180 mm, Max. diameter to be rectified: 355 mm, Max. piece weight between points: 300 Kg, Max. weight with plate: 125 Kg, Transverse travel of the carriage (X axis): 350 mm, X-axis speed: 0.01 / 6.000 mm/min, X-axis Resolution: 0.0001 mm, X-axis measurement system: Digital ruler, Longitudinal travel of the carriage (Z axis): 1.300 mm, Z-axis speed: 0.01 / 15,000 mm/min, Z-axis resolution: 0.0001 mm, Z-axis measurement system: Digital ruler, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80 mm, Main engine power: 7,5 Kw, Angle of rotation of the grinding head: -30º / +210º, Workhead rotation speed: 10 / 800 rpm, Workpiece holder head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the tailstock shank: 60 mm, Course of the counterpoint reed: 40 mm, Control type (CNC/manual): CNC, CNC brand: FAGOR, CNC model: 8040-T, Dimensions ...
Cup wheel Ø: 180 mm Cup wheel speed: 2900 rpm electr. Connection: 380 V, 2900 rpm, 0.9 kW Vibration table dimensions: 200 x 350 mm Tilting Swinging Table Swing table swivels by +/- 20° Dimensions: 750 x 350 x 1270 mm
1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump
Centerless grinding machine, ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel width: 200, Grinding wheel diameter: 400
Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...
Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...
X-travel 420 mm YWeg 270 mm Table size 254 x 482 mm Projection 254 / 318 mm Grinding spindle speeds 12 - 60,000 rpm Spindle stroke 92 mm Spindle speeds 90, 136, 184, 280 rpm Stroke rate, adjustable 2 - 120 strokes at 51 mm Accuracy 1.25 μm at 30 mm Compressed air connection 7 bar Machine weight approx. 1700 kg Dimensions approx. 1.45 x 1.2 x 2.4 m
G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height ...
G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...
Long belt grinding machine Manufacturer: Samco Type: EG Year of Make: 1987 Grinding length: 3,000 mm Incl. spare straps
Key data: 600 mm, 350 mm
G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg
Thiel Produro 115 Filing machine - Infinitely variable stroke and speed adjustable - Stroke 40-120mm - Speed 60-300 min - Table swivel 15° - Weight approx. 500kg
1 gebr. Cylindrical grinding machine, Fabr. Cincinnati, Type R 75, Built in 1971 Tip height 130 mm Grinding length 760 mm Spindle bore 38 mm Grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. Max. Grinding spindle can be swivelled twice
Swivel angle 135° Motor 1.1 kW Table height 860 mm Table surface 800×1000 mm Spindle dimensions 28 x 90 mm Spindle speed 1500 rpm with feed unit: Felder S/308, YOC 2011 and accessories
maximum number of results exceeded
please refine your search
