126,612 used machines on RESALE, but how to find them? Machine Search
Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg
Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max. in kg: 4000 kg stroke: 3200 mm fork length: . mm power fuel: Diesel weight of the machine ca.: 6,43 t dimensions of the machine ca.: 4,8x1,5x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
mechanical force transducer, force measuring bracket FORCE GAUGES HALLE 0 - 10 kN 1 t in wooden box Dimensions: 250 x 150 x 85 mm
mechanical force transducer, force measuring bracket FORCE MEASURING INSTRUMENTS HALLE 0 - 2000 N 200 kg in wooden box Dimensions: 250 x 150 x 85 mm
Shaft forks 1 pair PAGUS 1300 x 800 x 100 mm Fork width: 120 mm Fork height: 40 mm Shafts Ø: 50 mm used,, tested ! Dimensions: 1300 x 800 x 300 mm
Punching PAGUS punching punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm
2-roll flow-forming line NAM600S General condition: practically new / already out of service Scraper device (around the tailstock) Working stroke max. 500 mm Scraper force, infinitely variable from 50 - 200 kN Hydrau I i k / lubrication / cooling system Drive power Hydraulics approx. 75 kW Olin content Hydraulic tank approx. 1,500 I Equipment/Com ponents Hyd raulics Make Parker Hannifin Drive power oil lubrication approx. 4.4 kW Olin content Lubricant tank approx. 600 I Equipment/Com ponents Lubricant system Make Parker Hannifin Connected load Cooling system approx. 2.2kW lnhalt Coolant tank approx. 650 I Powerful coolant supply, adjustable 0 - 200 l/min. Cooling water requirement hydraulics + lubrication approx. 2.500 /h Cooling water flow temperature max. 25´C min. Cooling water differential pressure 2bar Cooling water system jerk max. 5 bar Compressed air system pr ...
Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg
We offer Peri Trio Elements 270 x 240 with 50% discount newly covered with original Peri Finply formlining 32 x Peri Trio Element TR 270 x 240 á 3409,00€ - 55% Discount = 1704,50€ / Piece Net price You bid on 1 element Peri Trio 270 x 240 sold separately. Subject to sale Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Manufacturer: Clark Gabelstapler, Type: CGP 25, Year: 1999, Drive type: Gas, Construction type: Frontstapler, Lift mast type: normal, Fork length in mm: 1250, Operating hours: 3414-7, Lifting power kg: 2500, Lifting hight approx. mm: 3300, FREE TEXT: Seitenschieer, Year :1999
Manufacturer: Yale, Type: GLP30VX V2395, Year: 2010, Fork length in mm: 1200, Lifting power kg: 3000, Lifting hight approx. mm: 3505, Total power kW: 38, Wight approx. kg: 4250, Year :2010
Manufacturer: Linde, Type: H 30/Diesel, Year: 1991, Drive type: Diesei, Lift mast type: Triplex, Total hight mm: ca., Fork length in mm: 1370, Lifting power kg: 3000, Lifting hight approx. mm: ca.3250, FREE TEXT: Vollgummibereifung 4-fach vorne hinten normal/verbreiterte Gabelaufnahme 1720 mm, Year :1991
Manufacturer: Linde, Type: E 30-02, Year: 2004, Drive type: elektro, Lift mast type: Duplex, Total hight mm: 2300, Fork length in mm: 1300, Operating hours: 5463,5, Lifting power kg: 3000, Lifting hight approx. mm: 3640, FREE TEXT: Kabine/Joystick steuerung/Sitzheizung/Heizung/Gabelverbreiterng/Ladegerät/Verfügbark eit, Year :2004
Manufacturer: MINIPAN Model: CMBY 0400X000.06 GIROPN Year of Manufacture: 2011 Type of Machine: Soft dough biscuit forming machine • Power supply: 400V • Power consumption: 3.2 kW • Backlit LCD display with touchscreen • Rollers for soft dough • Fixed molds with wire cutter • Rotating molds: "guillotine" that opens when the dough is placed and then closes for precise dosing without dripping • Sheet size: width 400 mm, Length: min. 600 mm, max. 800 mm • Sheet types: 2 internally inclined edges, magazine for up to 20 sheets • Dimensions: Length = 2600 mm Width = 990 mm Height = 1400 mm Weight = 530 kg • Sugar dispenser at the machine outlet • DÜBOR TSA 800/10 plate lubricator (, 2012) with 5 spray nozzles Find more here - / Contact us at -
Shuttle kiln for the production of Hand Formers Unit No 5: 5.8m3 shuttle kiln, year 2017, USD 30,700 Unit No 6: 7.7m3 shuttle kiln, year 2018, USD 56,500 Unit No 37: 9.0m3 shuttle kiln, year 2020, USD 74,100 Unit No 24: 7.7m3 shuttle kiln, year 2021, USD 97,700 Unit No 23: 9.0m3 shuttle kiln, year 2021, USD 107,400 For further inquiry, can email to: sywee@topglove.com.my
CONCRETE – STAIR FORMWORK FOR SPIRAL STAIRS LEFT & RIGHT ROTATION Pitch 17-19 cm infinitely adjustable Manufacturer: HOVAL Type: Alphatop Little used – as good as new Minimal changeover times. This makes daily concreting possible. The information is non-binding, prior sale is reserved.
- Battery: 24 V - Nominal load capacity: 1400 kg - With initial lift - Fork length: 1200mm - Service: overhauled, battery change in March 2025. - In good condition
Used packaging machine made by Ulma, model: TF Optima 416. New: 2000.
serial number: B024D04184T fork length: 1050- 1220 mm weight: 9640 kg size of tire: 28 x 12 x 22 size of tire: hinten 22 x 8 x 16 : 70 % height of stroke: 4600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 150 kg, 480 mm, 375 mm
Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg
Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used
Bucket with tilting function for forklift trucks BAUER type BSM 90Forklift bucket, tipping bucket, snow shovel, chip bucket, dump bucket, tipping containerFabr. No. 4421 Year of construction 1983Load capacity: 1500 kgVolume: 0.9 m³Bucket width: 1570 mmBucket depth: 1200 mmBucket height: : 550 mmDrive-in pockets: 120 x 70 mmTine spacing inside/outside: 500/740 mm- mechanical dumping device- forklift entry pockets with openings for the forks in the cargo area- orange painted with slight rustingWeight: 275
weight max. in kg: 3500 kg stroke: 4,8 mm fork length: 1200 mm battery: 80V/280AH Li-ion weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,94 x 1,23 x 2,25 m New EP EFL 352 with LI-ION battery and charger. Triplex mast of 4.8 meters Load capacity of 3500 kg Headroom of 2.25 meters with sideshift and 4th hydraulic function 5 year guarantee on the battery and 1 year on the forklift. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two flow wrapping machines and a Hugo Beck shrink tunnel are available. 1) Hugo Beck Flexo 500 S flow-wrapping machine, year of manufacture: 2004, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recycled film/half-tube and flat film. 2) Flow wrapping machine Hugo Beck Flexo 500 S, year of construction: 2001, max. film width: 550mm, product width min./max.: 25mm/450mm, product height min./max.: 2mm-200mm, min. product length: 80mm, packaging capacity: 80 cycles/min, machine dimensions X/Y/Z: approx. 2200mm/1500mm/900mm, weight: approx. 700kg, packaging material: PE/PO/biofilm/recyclate film/half-tube and flat film. 3) Shrink tunnel Hugo Beck 5012/25, year of constructi ...
Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025.
Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible.
An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.
Two identical vertical flow-wrapping machines from PFM are available. 1) PFM Zenith, year of manufacture: 2012, weight: approx. 870kg, connected load: 5kW, packaging output: approx. 60/min. 2) PFM Zenith, year of manufacture: 2009, weight: approx. 980kg, connected load: 6kW, packaging capacity: approx. 60/min. Both machines were used in the food industry for packaging individual bags in a large outer bag. Documentation available. On-site inspection is possible.
Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible.
A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible.
Load capacity: 1600kg, lifting height: 4000mm, free lift: 1500mm, overall height: 1970mm, turning radius: 1505mm, travel speed: 16km/h, lifting speed: 0.6m/s, lowering: 0.58m/s, tires: superelastic, fork length: 1200mm, drive: electric, weight: approx. 3300kg, operating hours: 9052h. Documentation available. On-site inspection is possible.
Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.
Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible.
Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.
Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible.
Vertical packaging machinee for quad sealeded bags and with a rectangular base. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min | bag sizes: L(180-400), front width: (70-220)mm, side width: (45-120)mm, (double film pulling possible for longer bags) | suitable film width: 270-620mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 6.5kW | air pressure: 0.4-0.8MPa | compressed air consumption: 0.9m?/min | dimensions (LxWxH): 233015202025mm | weight: 850kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and t ...
Vertical packaging machine for making Doypacks or flat bags with zipper or without. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 40 cycles/min | bag sizes: L(140-335)xW(70-300)mm | suitable film width: 280-720mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 5.8kW | air pressure: 0.4-0.8MPa | compressed air consumption: 0.8m?/min | dimensions (LxWxH): 232019202125mm | weight: 1100kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines ...
Vertical packaging machinee for quad sealeded bags and with a rectangular base. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min | bag sizes: L(150-350), front width: (60-190)mm, side width: (40-100)mm, (double film pulling possible for longer bags) | suitable film width: 240-520mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 6kW | air pressure: 0.4-0.8MPa | compressed air consumption: 0.3m?/min | dimensions (LxWxH): 202014402130mm | weight: 780kg. Please note that our new prices are often below the usual used prices. Please feel free to in ...
Vertical packaging machinee for quad sealeded bags and with a rectangular base. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min | bag sizes: L(150-350), front width: (60-190)mm, side width: (40-100)mm, (double film pulling possible for longer bags) | suitable film width: 240-520mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 5kW | air pressure: 0.4-0.8MPa | compressed air consumption: 0.7m?/min | dimensions (LxWxH): 202014402130mm | weight: 750kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tel ...
Vertical packaging machinee for quad sealeded bags and with a rectangular base. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min | bag sizes: L(180-400), front width: (70-220)mm, side width: (45-120)mm, (double film pulling possible for longer bags) | suitable film width: 270-620mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 5.8kW | air pressure: 0.4-0.8MPa | compressed air consumption: 0.3m?/min | dimensions (LxWxH): 233015202025mm | weight: 880kg. Please note that our new prices are often below the usual used prices. Please feel free to ...
Vertical packaging machine for forming and sealing 3-side OR 4-side seal bags. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 50 cycles/min | bag sizes: L(40-330)xW(70-210)mm, (double film pulling possible for longer bags) | suitable film width: 140-420mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 3.5kW | air pressure: 0.2-0.8MPa | compressed air consumption: 0.6m?/min | dimensions (LxWxH): 120810301620mm | weight: 450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-5 ...
Vertical packaging machine for making Doypacks or flat bags with zipper or without. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 45 cycles/min | bag sizes: L(120-235)xW(60-200)mm | suitable film width: 280-520mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 3.9kW | air pressure: 0.4-0.8MPa | compressed air consumption: 0.7m?/min | dimensions (LxWxH): 209018201935mm | weight: 800kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines a ...
Vertical packaging machine for forming and sealing 3-side OR 4-side seal bags. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min | bag sizes: L(40-210)xW(60-160)mm, (double film pulling possible for longer bags) | suitable film width: 120-320mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 2.4kW | air pressure: 0.2-0.8MPa | compressed air consumption: 0.6m?/min | dimensions (LxWxH): 132610661503mm | weight: 450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-5 ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). Twin version for faster output due to 2 complete production lines in one machine. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 902=180 cycles/min | bag sizes: L(40-300)xW(60-180)mm, (double film pulling possible for longer bags) | suitable film width: 140-380mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 3.9kW | air pressure: 0.4-0.8MPa | compressed air con ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly | SIEMENS PLC | WEINVIEW touch screen | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 30 cycles/min | bag sizes: L(60-600)xW(200-585)mm (double film pulling L = 1100mm), gusseted stand-up pouches: L(60-600)xW(140-500)xD(100-250)mm (double film pulling L = 1100mm) | suitable film width: 420-1200mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 8.7kW | air pressure: 0.7MPa | compressed air consumption: 0.25-0.40m?/min | weight: 1060kg. Please note that our new prices are ofte ...
Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). High-Speed Version with servo driven continuous sealing unit for end sealing. The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 120 cycles/min | bag sizes: L(40-300)xW(60-200)mm, (double film pulling possible for longer bags) | suitable film width: 140-420mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 4.5kW | air pressure: 0.4-0.8MPa | compressed air consumption: 0.2m?/min | weight: 580kg. Please note tha ...
maximum number of results exceeded
please refine your search
