grinding 400mm used for sale

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...

SPECIFICATIONS: 2 brushing units Width transport carpet mm: 400 Workpiece height mm: 10 - 120 Feed speed m/min: 8-12 Installed capacity KW: 2.0

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 40 mm -Transport dimensions: Ø 440 x 85 mm -Weight: 32.6 kg

Brushes + grinding machine Erma Fabr. Erma Type. DG 243 Engine. 1.5 kW Turn. 1430 rpm

Weipert Crankshaft Grinding Machine Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 4300 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 30 mm -Transport dimensions: Ø 400 x 80 mm -Weight: 28.7 kg

I sell a wide belt grinding machine SCM Sandya 16 S 110, built in 2012. Configuration: 18.5 KW hard-rubber grinding cylinder 15 KW hard-rubber grinding cylinder 11 KW combi unit soft-rubber cylinder + pneumatic shoe. Working width 1100mm. Pressure rollers for short elements. Compressed air Clean for all units. Weight 2750kg 3 motors 18,5 + 15 + 11kW Incl. full documentation. Condition AS NEW ! The machine did very little work. Available the same.

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, see photos -Grindstone: 420 x 60 mm, unfortunately without type designation -Transport dimensions: Ø 420 x 87 mm -Total weight: 37 kg

grinding diameter: 350 mm grinding length: 600 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±10 ° longitudinal feed of the table: 1100 mm table speeds: 0,02-6 m/min : 130 kg cross travel: max. 270 mm : 130 inkl. Spannung kg : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service  ...

Grinding machine for machine tools, especially small lathes, etc.

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 50-60 mm -Grinding wheel: Ø 225 x 40 mm -Shipping/Price: complete -Dimensions each: Ø 225 x 90 mm -Weight: 10.4 kg/piece

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

MAX DIAM 400, MAX MODUL 8

Stock number: 3732 INTERNAL CYLINDRICAL GRINDING MACHINE Manufacturer: TRIPET HAUSER HTT CNC , Type: TST 100 CNC-4R Machine NO.: T1000256, Year of construction: 2002 Specifications: Grinding length 300 mm Size internal grinding diameter 0.5-75 mm Center height B axis- 130 mm C-ash main spindle 3" - 100 rpm degree Z ash 340 - 0.0005 mm mm B- Ashes Manuel -30/+60 degree X ash cross slide 50 mm Grinding spindle speeds 4 spindles - 25,000 - 45,000 2x 75000 rpm Resolution 0.0005 mm Tool spindle dock speeds B- axis 10-1500 rpm CNC control. Control Brüsch TPS 3000 Fabr. Accessories: Centering chuck PHM Heyn Pneumatic. 250 mm Ø Papir Filter Knoll Length: 2500 mm, Height: 2300 mm, Width: 2500 mm, Weight: 3500 kg

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

Centerless external cylindrical grinding machines Herminghausen SR 40-3 Machine Was improved and rebuilt by the company Ebert. Thus type designation CL 43. Original price 299.000, - €. Operating voltage: 400 volts, power consumption: 22 kW, workpiece diameter 2 - 130 mm, largest grinding length for through grinding 250 mm, grinding wheel diameter min/max 400/600 mm, grinding wheel bore 604.8 mm, control wheel diameter min/max 220/300 mm, control wheel bore 152.4 mm, grinding wheel circumferential speed 40 m/s, control spindle speed infinitely adjustable 0 - 200 rpm, control Siemens S7, cooling lubricant supply unit, weight of the machine ca. 6000 medical history Errors excepted!

CNC external cylindrical grinding machine, brand Studer, type S40-4, Bi 1987, Documents are available. The price is net

Key data: 1100 , 2 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Key data: 1350 , 3 , 160

Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines

Key data: 950 , 1 , 160

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

Key data: 1100 , 1 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

Key data: 1350 , 2 , 160

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm -Grinding wheel: Ø 210 x 40 mm -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg

DM 750 x 60 x 304,8mm unused in original box. Specification: CS25A 802 JJ6 VK1 For stainless material. Piston rods were ground with it.

Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Mägerle rack and pinion grinding machine grinding machine MFP-L Siemens CNC Manufacturer [manufacturer]: Mägerle Type [ type]: MFP-L-260-75 Control unit: Siemens 840D Sinumerik Incl. handwheel Year of construction[construction year]: 10/2008 Travel path: Clamping surface table X= 2202mm Clamping surface table Z=352mm Longitudinal stroke 2600mm Cross stroke of the grinding support: 650mm Distance between table and grinding spindle axis 806mm Grinding wheel dimensions: Diameter 400mm Width 160mm Bore 127mm peripheral speed grinding wheel: 35(50) m/s Lifting speed: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min smallest delivery amount 0,001mm Drive power: grinding wheel (AC) 75kW Total connection power: Machine 113kVA Knoll coolant filtering equipment dimensions ca: (L x D x H): 5.6m x 2.4m x 3m [weight]: 2.000kg Machine weight: 21.000kg Sp ...

Double disc grinding machine

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

Grinding machine XXIII DH3 ready for use from site in actual condition

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

offer 21055 Double polishing block Specifications: - Grinding wheel diameter approx. 300 mm - Grinding wheel width approx. 40 mm - Grinding wheel bore approx. 70 mm - Disc speed 1450 rpm - Working height 1100 mm -Mot. Dust extraction - Drive 400 V / 1.1 kW - Space requirement approx. W 800 x H 1250 x D 600 mm - Weight approx. 150 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg

grinding stone, grinding pin -Recording: M12 -Outer diameter: 50 mm -Length: 65 mm -Quantity: 74 pieces -Sale: only complete set -Weight: 28 kg

grinding stone, grinding pin -for internal grinding machine -1 Collet chuck -Cone mount: Ø 53 mm -Grinding pins: various diameters -Outer diameter: 1-40 mm -Sale: only complete set -Weight: 6 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Extraction system from a tool grinding machine Vollmer. With the extraction system, hot or glowing chips can be extracted from grinding machines, e.g. from surface grinding machines Elb or from e.g. tool grinding machine Saake or Deckel and others. Power supply 400Volt. The machine is equipped with a chip drawer and sucks through a pocket filter which can be cleaned by means of a crank and vibration. Special price

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Grinding machine, angle grinder, lathe tool grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 55 mm -Outer diameter: Ø 110 mm -Width: 22 mm Price: per piece -Number: 12 available -Weight: 0.7 kg

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy