grinder surface used for sale

Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm

Key data: 150 mm, 6800 mm

Long belt sanding machine Langzauner LZG-E Long Fence Long Belt Sanding Machine, Belt Sanding Machine, Good Condition A long-belt sanding machine from the manufacturer Langzauner is offered here. The machine is in good condition, has a high quality workmanship and is comfortably equipped. A turntable is installed in the table (retractable) so that the workpiece can be rotated quickly. The turntable is raised slightly at the touch of a button by means of a pneumatic cylinder, so that the workpiece can be rotated without much effort. A high-quality and fully equipped sanding machine. Technical data: Table dimensions 2500 mm x 1000 mm Large stand load 1000 mm Motor power sanding belt 3/4.2 kW Fan motor power 1.1 kW Belt speed 11/22 m/sec Belt length 6800 x 150 mm (incl. spare sanding belts) Table height adjustment range 280 mm Electric table height adjustment Weight appro ...

Used spices in glass jars with grinder production line. Cartoning Machine The UNILINE AU-10-TA-R TF600x400x1500 automatic packaging line consists of: 1.TA-R grouper. 2.TF600x400x1500 tunnel. 3.UNILINE packaging line. Control cabinet containing the control equipment. This machine was designed and built for the production of bulk packaging of a given product. Packaged product types: •Grinder on a 2x3 foil tray with rim. •Grinder on a 2x2 foil tray with rim. •Grinder in 2x3 foil. •Grinder in 2x2 foil. •Grinder in 2x3 foil. •Grill tube in 2x3 foil. Grill tube in 2x2 foil. Sealer The machine consist of: •Feeder •Sleeve applicator head •Guide rollers •Sleeve ejection assembly •Format change kit •Infeed screw mechanism •Feeder assembly •Sleeveless package ejector assembly •Applicator pin assembly Optic check The s ...

Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg

G&N Kugelmüller MPS 1 Cup Grinder -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Year of construction 1996 -Drive motor 0.6KW -Machine enclosure -Well-maintained original condition Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150Kg

A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.

G&N Kugelmüller MPS 1 -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Drive motor 0.6KW -Coolant device -Machine enclosure Dimensions; LxWxH 0.8x0.7x1.6Meter / Weight 150Kg Errors / input errors excepted Hjbsvtrr Tjkn Au S Tol

Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Grinding machine, angle grinder, lathe grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, tool grinder -Manufacturer: Bösch, tool grinding machine type L 15 -Grinding discs: Ø max. 150 x 32mm / framed Ø 125 mm see photos -Motor power: 0.55 kW -Speed: 2800 rpm -Coolant device: -Dimensions: 1110/480/H1310 mm -Weight: approx. 182 kg

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: Rema, double bench grinder type DS 12/200 A with sanding dust extraction -Grinding discs: max. Ø 200 x 32 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 480/450/H1060 mm -Weight: 143 kg with pallet

Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

AVIAN Engineering Grinder G46/ 60, refurbished 2003 Consisting of :- Driven Infeed Pinch Rollers Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs Through-Put 300 KG/H Cutting Chamber 620 x 460 mm Hopper Opening 620 x 500 mm, With Blower Good Production Condition. EXW our Warehouse Enger, Germany

Height=1.7 m, Overall length= 1.65 m, Overall width= 1.85 m, Net weight= 1530 kg,

CONTROLS   conventional WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 150 mm   material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1   spindle revolutions (max): 610 /min GRINDING SPINDLE 2   spindle revolutions (max): 610 /min COMPONENT-FEEDER   Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS   space requirements -left/right-: 5230 mm   space requirements -front/back-: 4460 mm   total height: 3600 mm   total weight approx.: 11000 kg Machine is dismantled and stored

CONTROLS   CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 180 mm   material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER   Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored

Height=1.15 m, Overall length= 0.95 m, Overall width= 0.7 m, Net weight= 215 kg,

Height=1.27 m, Overall length= 1.3 m, Overall width= 0.7 m, Net weight= 277 kg,

Vertical grinder for the production of pearl barley, spelt and einkorn rice as well as for grinding lentils

A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible.

Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg

Double bench grinder on wall bracket 230 V

Belt sander with - Contact disc: 600 x 150 mm Belt width 150 mm Belt length 2000 mm Belt speed 33 m/sec Total power requirement 4 kW Machine weight approx. 100 t Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-46642-95

Belt width 75 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.1 HP Machine weight approx. 75 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5) Auction-ID: A7-46642-230

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46642-15

Belt width 150 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.8 HP Machine weight approx. 100 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Auction-ID: A7-46642-201

Model: Fine AH 636c (also called AHSI 636c) Type: Straight Grinder / Stick Grinder Power: 280 W Voltage: 220/230 V, 50/60 Hz No-load speed: approx. 5,500 rpm Tool holder: Gear ring drill chuck up to Ø 10 mm Max. abrasive media: Ø 50 mm Weight: approx. 1.7 kg Cable length: 3 m Use: Brushing, polishing, grinding, light drilling work Weight incl. packaging approx. 3kg Auction-ID: A1-46686-51

Grinder Risco -Type: TR 130 -Power: 11.8 kW -Throat diameter: 130 mm -With 200L trolley loading -Capacity: 200L -Knife and sieve set -Weight: 600 kg -Dimensions: 1300 x 1950 x 2780 mm -Power supply: 400V 3Ph 50Hz -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46642-252

Grinder Risco -Type: TR 130 -Power: 11.8 kW -Throat diameter: 130 mm -With 200L trolley loading -Capacity: 200L -Knife and sieve set -Weight: 600 kg -Dimensions: 1300 x 1950 x 2780 mm -Power supply: 400V 3Ph 50Hz -Made of stainless steel -Condition: Used in very good condition, overhauled, ready to work

Power Cutter Grinding wheel 250mm Speed 2880rpm Motor 1.1KW with various grinding wheels with vice and dial gauge stroke Coolant system Connection voltage 380Volt see pictures Condition: unchecked (6) Auction-ID: A7-46642-199

Belt sander: This machine can also be mounted without a base. Therefore, it is suitable as a table belt sanding machine. Belt width 100 mm Strap length 1220 mm Belt speed 1140 m/min. Package size max. 0.62 x 0.4 x 0.35 cm Total power requirement 1.5 kW Machine weight approx. 0.04 t Dimensions L x W x H 0.97 x 0.67 x 0.37 m Condition: never used / new (5) Auction-ID: A7-46642-23

Belt sander with - Contact disc: 200 x 75 mm - Continuous surface grinding table: 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 37 m/sec Total power requirement 3 kW Machine weight approx. 0.105 t Space requirement approx. 1.2 x 0.5 x 1.0 m Condition: never used / new (5) Auction-ID: A7-46642-207

Grinder Meissner -Type: AM 130 -Power: 13 kW -Throat diameter: 130 mm -Dimensions: 1250 x 1130 x 1300 mm -2 gears -With mixing arm -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Condition: Used in very good condition, ready to work, overhauled

Belt sander with - Contact disc: 600 x 75 mm Belt width 75 mm Belt length 2000 mm Belt speed 30 m/sec Total power requirement 3 kW Machine weight approx. 70 t Space requirements approx. 1.2 x 0.5 x 0.75 m Condition: never used / new (5) Auction-ID: A7-46642-7

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325x175x125 mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1.550 Kg

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 4.0/2.3 A Speed: 1450 rpm Grinding wheel dimensions: 300/50/76 mm Reference: Schönichen - Lot 88 Auction-ID: A7-46763-295

Speed: 2800 rpm Connection: 0.8 kW Operating voltage: 220/380 V Frequency: 50 Hz Grinding wheel diameter: 180 mm Grinding wheel width: 30 mm Reference: Beeper - Lot 69 Auction-ID: A7-46763-27

right working side equipped with belt sander left working side equipped with polishing brush revolutions: 1400/2800 rpm for further technical data see photographed nameplate Auction-ID: A7-46287-227

With ALG 18/6 FAST charging station and 1x 18V Li-ion battery. Auction-ID: A1-46700-82

Dimensions grinding wheel 125x16x12.7 mm Auction-ID: A1-46781-38

5 pieces consisting of four angle grinders, including a large MAKITA angle grinder with a grinding wheel diameter of 230 mm, type: GA 9050 R, year of construction: 2022, nominal speed: 6600 rpm, power: 2000 W three smaller angle grinders with a grinding wheel diameter of approx. 120 mm (see photos) a hand rod grinder DIE GRINDER, model number: S1J - 25, power: 750 W, mounting diameter: 6 mm for further data see photographed nameplate Reference: Schiller - Lot 16 Dimensions: 600mmx900mmx150mm Weight: approx. 70kg Auction-ID: A7-46763-188

Dimensions grinding wheel 175x25x32 Auction-ID: A1-46781-39

Serial number: GWH01703202060 Speed: 6501 rpm Motor power: 70 W Grinding wheel diameter: approx. 80 mm incl. collets Reference: Schiller - Lot 14 Dimensions: 250mmx120mmx200mm Weight: approx. 5kg Auction-ID: A7-46763-186

Machine number: 043.082 Max. sanding belt width: 150 mm Auction-ID: A7-46287-12

Operating voltage: 220/380 V Connection: 0.9 kW Rated current: 3.6/2.1 A Speed: 2900 rpm Grinding wheel dimensions: 200/230/51 mm Auction-ID: A7-46287-80

With ALG 18/6 FAST charging station and 1x 18V Li-ion battery. Auction-ID: A1-46700-89

With ALG 18/6 FAST charging station and 1x 18V Li-ion battery. Auction-ID: A1-46700-88

Operating voltage: 220/380 V Frequency: 50 Hz Rated current: 1.4/0.8 A Connection: 300 W Speed: 3000 rpm Grinding wheel dimensions: 175 x 25 x 32 mm Reference: Apprentice workshop part 2 - Lot 3 Auction-ID: A7-46763-247