135,536 used machines on RESALE, but how to find them? Machine Search
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 600 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 2,250 kg Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Repairable, does not heat up Auction-ID: A1-49568-21
Output: 60, 85, 130mm, including: 1x Astor Auction-ID: A1-50060-168
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
clamping force: 400 kN injection volume: 125 cm³ screw diameter: -- mm platen size: 550 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01B clamping unit: - Clamping unit: vertical - Tonnage: 40 t - clamping force: 400 kN - Heating platen size: 550 x 400 mm Injection unit: - Injection volume max.: 125 cm³ - Connected load: 3x 400 V, 50 Hz 90A fuse protection Approx. dimensions: 1,550 x 1,050 x 3,120 mm Weight approx.: 3,200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Extension: 130mm, including 1x box Nesting VL 50 + Stamp Auction-ID: A1-50060-161
Load: 130mm, including 1x box, pushers + stamps, nickel Auction-ID: A1-50060-165
Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high
Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)
Capacity: 3.404 Ltr. Operating pressure: 2.0 bar, with test book Year of Make: 1986 Manuf.: Gresser Material: stainless steel, 1.4301 Type: Cylindrical sthd, on 4 feet, outlet with disc valve DN 40, pulled down cleaning line with fitting, pedestal hose, manhole cover last use: beer Height approx. 2,500 mm (with cleaning line) Diameter: approx. 1,505 mm Please send inquiries to: infohochholzer
Execution: 70mm, including 5x box Nestles Large, VL 70 nickel Auction-ID: A1-50060-163
Output: 130mm, including 5x box with studs Auction-ID: A1-50060-167
Offered for sale: Hydraulic CNC press brake with 5-axis backgauge. Bending length: 3060mm. Pressing force: 1300kN, max. stroke: 215mm, max. operating pressure: 340bar, usable installation height: 385mm. Inspection possible by arrangement.
Key data: 22 mm, 900 , 850
Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
pressure: 100 t throat: 315 mm stroke: 8 - 112 mm table surface area: 725 x 570 mm ram surface: 410 x 315 mm ram adjustment: 80 mm no. of strokes: 55 / 82 Hub/min tool shank hole (depth x diameter): 85 x 50 mm dayligth: 355 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 2,00 x 1,00 x 2,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year 2013 Auction-ID: A1-50513-47
Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible.
COMAP packaging press mod. SC-10 - CE compliant - used - Parcel dimensions H 750 mm W 1000 mm D 700 mm - Strength Kgf 1000 - Loading width: 1000 mm. - Loading depth: 700 mm. - Loading height : 1390 mm. - Complete with manual - Year 1996
Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.
Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
COLLY 1410S Press brake Bedknife Multi V-shaped clamp Capacity 140 t x 4050 mm Max. operating pressure 220 Passage between uprights 3100 mm Max stroke 7 - 250 mm Max distance between table and ram 500 mm Depth of throat 300 mm Table width 190 mm Locking speed 40 mm/sec Working speed 7 mm/sec Returning speed 50 mm/sec Dimensions 4250x1800x2995mm
This 6-axis TRUMPF TrumaBend V 850 S was manufactured in 2004. It features a press force of 850 kN and a maximum stroke of 445 mm. The machine is equipped with a 5-axis CNC backgauge system and hydraulic tool clamping for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V 850 S press brake we have for sale. Contact us for further details.
Press brake manufactured in 2006. This LVD PPEB 170/30 features a bending length of 3000 mm and a pressing force of 170 tons. If you are looking to get high-quality bending capabilities, consider the LVD PPEB 170/30 machine we have for sale. Contact us for further details.
TRUMPF Trumabend 125/3.1-DA24 hydraulic Press brake YOM 1994 Pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm total power requirement 15 kW column arm 350 mm ajustment speed 130 mm/sec work speed 1-10 m/min return speed 100 mm/sec back stop - adjustable 1000 mm Stroke 200 mm dayligth 400 mm Pressure power 280 bar dimensions of the machine ca. 3,6 x 2,3 x 2,8 m weight of the machine ca. 9,5 t Control unit CNC Maker of control unit DA24 4-Axis Control (y1,y2,x,r)
Press brake manufactured in 2009. This LVD PPEC 220/42 features a bending length of 4000 mm and a pressing force of 220 tons. If you are looking to get high-quality bending capabilities, consider the LVD PPEC 220/42 machine we have for sale. Contact us for further details.
Supply voltage: 1~ 230V AC, rated current: 16A, mains frequency: 50Hz, connected load: 0.64kA, CE marking. On-site inspection is possible.
automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)
Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.
Year of construction: 2008 Auction-ID: A1-47394-325
Operating pressure: 11bar, capacity: 2000l; for more details see photos of nameplate Auction-ID: A7-50677-929
Key data: 22 t, 900 mm, 850 mm
Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
Including tank Auction-ID: A1-47366-200
This hydraulic press manufactured in 2020 features a pressing force of 250 t and a working length of 3,100 mm. It is equipped with an ESA AUTOMOTION S640 touch screen CNC control and an electronic color graphical programmer. If you are looking to get high-quality pressing capabilities, consider the GILARDI Italy 3.25 machine we have for sale. Contact us for further details.
Key data: 22 t, 900 mm, 850 mm
Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!
AEROCAP PRO – professional low-pressure sandblasting machine, 17 litres The AEROCAP PRO is a professional mobile low-pressure blasting machine for regular and intensive blasting work on wood, metal, stone and technical components. The machine is designed for commercial use and combines a 17-liter abrasive tank with professional air treatment, automatic start and stop control and wear-resistant tungsten components. TECHNICAL DATA • Model: AEROCAP PRO • Abrasive container: 17 litres • Container bottom: conical • Dimensions: 97 × 34 × 33 cm • Weight: 64 kg • Blasting hose: 10 m, removable • Control: automatic start & stop system • Air treatment: professional compressed air dehumidifier • Pressure gauge to control working pressure • Nozzle: 1 tungsten nozzle in selected size • Nozzle range: 2 to 6.5 mm depending on configuration • Venturi tu ...
General Description Industrial high-pressure water pump manufactured by PTC , model MLR 300/200 . Heavy-duty electrically driven pumping unit designed for high-pressure water applications. The unit was used exclusively on one project to operate a Wassara water-powered down-the-hole (DTH) drilling hammer. Technical Details Manufacturer: PTC Model: MLR 300/200 Machine type: High-pressure water pump Year: 2022 Operating hours: 578 h Maximum working pressure: 200 bar Maximum flow rate: 300 l/min Electric motor power: 132 kW Power supply: 400 V, 3-phase, 50 Hz Rated current: 250 A Starting system: Star-delta Starter manufacturer: Formis Davide Electrical cabinet protection: IP66 Application Previously used to supply high-pressure water to a Wassara water-powered DTH hammer. Suitable for demanding industrial, drilling and high-pressure water pumping applications where hig ...
maximum number of results exceeded
please refine your search
100 € 
