gravure 4 color used for sale

Roller conveyor, conveyor belt, roller track, accumulation roller conveyor -Roller width: 440 mm -Conveyor length: 2100 mm -Roller diameter: 50 mm -Axle spacing: mm -Height: 200 mm -Roller conveyor: driven -Geared motor: 24 volts -Speed: 20 m/min -Quantity: 1x roller conveyor available -compatible with: ID19856 -Dimensions: 2100/510/H200 mm -Weight: 72 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow rate: m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with groove for centering -Width: 300 mm -Length: 400 mm -Height: 36 mm -Milled from 2 sides -Drawing with the photos -Weight: 32 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type no.: 4205 1021/1 -Display range: 0 V - 40 V -Installation dimensions: LxWxD approx. 140x140x90 mm -Dimensions: 144/144/H90 mm -Weight: 1.2 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-35-400-PPV -Piston: Ø 35 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 65/58/H555 mm -Weight: 2.45 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-50-400-PPV -Piston: Ø 50 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 70/70/H576 mm -Weight: 4.65 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 450 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 675 mm -Total length extended: 1125 mm -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 52/H675 mm -Weight: 4.8 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-80-400-PPV -Piston: Ø 80 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 97/97/H675 mm -Weight: 8.3 kg

Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-400-PPV-A -Piston: Ø 32 mm -Stroke: 400 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -for: proximity switch -Number: 1x available -Price: per piece -Dimensions: 45/45/H545 mm -Weight: 1.7 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -for: turning and milling machines -Manufacturer: Heidenhain -Type: AE LS 477 -Dimensions: 47/175/H28 mm -Weight: 0.31 kg

Gear motor, electric motor, electric gear motor -Electric motor: for gearbox -for gear motor type: CB59-80K/4DBRF -Speed: 1380 rpm -Power: 0.55 kW -Worm shaft: Ø 20 mm -Construction: B5 -Protection class: IP 54 -Brake -Price: per piece -Number: 1x available -Dimensions: 345/210/H160 mm -Weight: 13 kg

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -for: machine tools and systems -Construction height: 168 mm -Load: 10-16 KN -Number: 2 pieces -Price: complete -Dimensions piece: 340/340/H168 mm -Weight complete: 50 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.75 kW -Speed range: 12.5 to 125 rpm -Motor: adjustable -Construction: B3 -Diameter shaft: 20 mm -Height shaft axis: 80 mm -Number: 1x available -Dimensions: 475/260/H220 mm -Weight: 40 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Drive motor: 0.75 kW 1400 rpm -Band speed: 20 m/min -Belt width: 490 mm -Drive roller: Ø 80 mm -Conveying length: 8000 mm -Band height: mm -Number: 1x belt conveyor belts available -Price: per piece -Transport dimensions: 8000/700 / H350 mm -Weight: 240 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 80 mm -Transport roller width: 495 mm -Total length: 530 mm -Shaft mount: 12 mm -Two-edge: 10 mm -Number: 184x rolls available -Price: per piece -Weight: 2.6 kg/piece

Furniture dolly, furniture dolly with plastic wheels, furniture transport trolley, transport trolley, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -MDF blockboard: 19 mm -Swivel casters: 4 -Heavy-duty transport trolley -Load capacity: 200 kg -Number: 1430 units available -Price for orders of 10 pieces: 15 EUR net/piece -Price for orders of 50 pieces: 13 EUR net/piece -Price for orders of 100 pieces: 11 EUR net/piece -Price: per piece -Dimensions: 910/425/H145 mm -Weight: 8.4 kg/piece

screw-in heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Power: 9000 watts 230/400 volts -Material: steel (magnetic) -Number: 8x radiators available -Price: per piece -Dimensions: 1020/60/H60 mm -Weight: 1.7 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from a Wanderer milling machine type: KFH401 -Travel: approx. 1000 mm -Width: 400 mm -Length: 2000 mm -Height: 330 mm -Plate thickness: mm -Table height: mm -Plate: Solid -Groove width: mm -Dimensions: 2280/430/H330 mm -Weight: 934 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: Nord SK80S/4 -Gearbox manufacturer: Nord 1S50AZ-80S/4BRE4 -Motor power: 0.55 kW -Speed: 29 rpm -Design: B14 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake -Dimensions: 420/200/H230 mm -Weight: 16 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: Nord SK71L/4BRE4-AB -Gearbox manufacturer: Nord 1S50AZ-71L/4BRE4 -Motor power: 0.37 kW -Speed: 76 rpm -Design: B14 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 54 -Brake -Dimensions: 400/204/H180 mm -Weight: 13.3 kg

Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter hollow shaft: 24 mm -Speed hollow shaft: 100 rpm -Diameter shaft: 14 mm -Speed shaft: 1500 rpm -Construction: hollow shaft -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 370/210/H175 mm -Weight: 12 kg

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 28 kW -Rotation speed: - -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 900/480/H390 mm -Weight: 240 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 465 mm -Total length retracted center center hole: 910 mm -Piston rod holder: Ø 20 mm -Cylinder holder: Ø 20 mm -universal: applicable -Number: 1x cylinder available -Price: per piece -Dimensions: 950/100/H75 mm -Weight: 12 kg/piece

Vibration damper, compensator, damper, -Shock absorber: unused -Installation: on pumps, compressors, valves -Machines: for noise dampening and absorption of small vibrations -Material: stainless steel -Clear diameter: 400 mm -Width: 370 mm -Quantity: 1x damper available -Price: per piece -Weight: 30 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece

Gear motor, electric motor, three-phase motor -Transfer in current condition as seen -Gear base: broken -Speed: 0.16 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 640/250/H240 mm -Weight: 42 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Table comes from an injection molding machine -Make: Arburg -Type: Allrounder 320-210-750 KN -Dimensions table: 490 x 490 mm -Bore center: Ø 125 mm -Thread holes: M12 -Dimensions: 490/490/H400 mm -Weight: 236 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox Lenze type: 11.431.10.08.1 -Manufacturer Engine ATB Type: ERFY 0.55/4-7 -Engine power: 0.37 kW -Speed range: 111 to 617 rpm -Motor: adjustable -height shaft axis: 50 mm -Quantity: 1x available -Price: per piece -Drive shaft: Ø 16 mm -Dimensions: -Weight: 22 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.0 kW -Speed: 1420 rpm -Volume flow: m³/h -Pressure: Pa -without: housing -Impeller outside: Ø 430 mm -Impeller inside: Ø 270 mm -Sash: 100 x 180 mm -Sheet metal plate diameter: 650 mm -Sheet metal plate bolt circle: 600 mm -Number: 3x fans available -Price: per piece -Dimensions: 400/650/H650 mm -Weight: 52 kg

Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, tacho generator, incremental encoder -Manufacturer: Klaschka, rotary pulse generator -Type: DIE/L-1.2-400 -Tension -Dimensions: 160/135/H90 mm -Weight: 0.8 kg

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys -Total length: 1500 mm -Total depth: 450 mm -Total height: 1530 mm -Arm length: 250 mm -Intermediate dimension: 26 mm -Number: 4x cars available -Price: per piece -Weight: 50 kg/piece

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 4050 mm -Height of table surface: 268 mm -Working height: 268 mm -Price: per piece -Number: 2x available -Transport dimensions: 4050/520/H268 mm -Weight: 764 kg / 828 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the table surface: 11370 mm -Height of table surface: 236 mm -Working height: 236 mm -Price: per piece -Number: 1x available -Transport dimensions: 11370/510/H240 mm -Weight: 2200 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: KCS 71.16-2 D -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/960/H600 mm -Weight: 470 kg

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Aggregate carrier, clamping plate, traversing table, for modular aggregate system, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG aggregate carrier for milling units -with heavy leadership -movable laterally -with counter -Table height: 285 mm -Table surface: 1210 x 295 mm -Table thickness: 18 mm -Dimensions: 480/1210/H290 mm -Weight: 172 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -with adjustable baffle -Roll width: 990 mm -Conveying length: 4800 mm -Diameter roller: 85 mm -Center distance: 155 mm -Height: mm -driven: via gearbox -Geared motor: kW -Speed: m/min -Dimensions: 4900/1350/H1100 mm -Weight: 1190 kg

Roller conveyor, conveyor belt, roller conveyor belt, dust blow-off machine, roller conveyor cleaning machine -with adjustable baffle -Compressed air blow-off nozzles below/above -Roll width: 950 mm -Conveying length: 4600 mm -Diameter roller: 85 mm -Center distance: 150 mm -Height: mm -driven: via gearbox -Geared motor: 0.25 kW -Speed: m/min -Dimensions: 1400/4700/H1400 mm -Weight: 600 kg

Clamping plate with T slots, plate field, welding table, welding table -Table width: 450 mm -Table length: 450 mm -Top plate thickness: 60 mm -Plate thickness bottom: 25 mm -Frame wall thickness: 10 mm -Height: 305 mm -Groove width: 18 mm -Hole centrally above: Ø 40/180 mm -Hole centrally below: Ø 180 mm -Dimensions: 560/460/H305 mm -Weight: 200 kg

CNC control, operator panel, control console, operating unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board -Manufacturer: Bosch, module from injection molding machine Battenfeld -Valve module: Bosch QV 60 0 811 405 099 -Dimensions: 220/45/H128 mm -Weight: 0.4 kg

Brush cylindrical grinder, external cylindrical grinder, internal cylindrical grinder, centering grinder, center grinding machine, hydraulic universal cylindrical grinder, polishing machine -Manufacturer: WMW Heckert, Hydraulic universal cylindrical grinding machine -Spindem lotor: VEB 0.8/1 kW / 1410/2840 rpm -Hydraulic drive: ADDA 0.75 kW -Centre height: 270 mm -Max. material diameter: Ø 320 mm when converted -Brush: max. Ø 250 mm -Center distance: 420 mm -Dimensions: see photos -Base cabinet: with extensive accessories incl. -Dimensions: 1720/920/H1230 mm -Weight: 790 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Frieseke & Hoepfner, hydraulic unit MKP R 14 / 9-1.6 -Motor: AEG 1.5 kW / 1400 rpm -Pressure: up to 450 bar -Delivery rate: 1.6 l / min -Individual components: see photos -Hydraulic tank: with level indicator -Dimensions: 1520/630 / H820 mm -Weight: 260 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Sold as is, in its current condition -Motor housing: Repair weld, see photos -Manufacturer: Frieseke & Hoepfner, hydraulic power unit MKPR 6/1.6 -Motor: AEG 1.1 kW / 1400 rpm -Pressure: up to 450 bar -Flow rate: 1.6 l/min at 1450 rpm -Individual components: see photos -Dimensions: 580/290/H485 mm -Weight: 46 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: lifting cylinder BVS 443 -Stroke: 160 mm -Piston: Ø 125 mm -Dimensions: Ø 180 x 310 mm -Weight: 42 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate -T-slot plate: for milling machines -Width: 500 mm -Length: 500 mm -Height: 87 mm -Plate: is solid -Groove width: 12 mm -Dimensions: see photo technical drawing -Quantity: 21x mounting plates available Price: per piece -Dimensions: 500/500/H87 mm -Weight: 91 kg/piece

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Kramer Grebe control block from vacuum packaging system Tiromat 3000/430 -Pressure switch: Herion 0 880 100 -Valves: IWN RMD-53/44 / BVB-F 25/40-1 / PMV-DR 20/40-P -Individual components: see photos -Total dimensions: 450/250/H330 mm -Weight: 13.5 kg