127,266 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Toshiba, Type: EX 40-4MCRD2, Modell: Programmmable Controller, Seriennummer: 94N-2025,
Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984
Manufacturer: Düspohl, Type: DGK 400, Year: 1980, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45 - 90, Cutting hight max mm: ca. 70, Max. cutting depth in mm: 150-2600, Max. cutting depth in mm: 150-2600, Power saw engine kW: 2,2, Width adjustment manually: yes, Saw blade diameter max mm: 300, rotations controlled: 5800, Exhaust diameter mm: 100, Year :1980
Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1889 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports, End stop included Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: very good (used) angle: 90° nominal voltage: 24V, 380-500V Conveying length in mm: 750 Nominal / outside width in mm: 485 Roll width in mm: 425 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive , Interroll EC 300 KW: 0,2 ...
Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997
pressure: 150 t chamfer lenght: 4300 mm distance between columns: 3700 mm ram stroke speed: 100 mm/sec working feed: 8 mm/sec return speed: 80 mm/sec stroke: 175 mm table height: 920 mm Control: DELEM DA 52 total power requirement: 11 kW weight of the machine ca.: 15000 kg dimensions of the machine ca.: 4800 x 1700 x 2850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
B&A REF: 9108 TON: 430 SCREW DIAMETER: 80MM SHOT WEIGHT: 1645 STROKE VOLUME: 1810CM3 INJECTION PRESSURE: 1615AR PLATEN SIZES: 1060 X 1135MM DBTB: 680 X 760MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 730MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 250MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 4 MOTOR: 45 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Inv. Num. : 8283 Type: KKS 450 H Producer: Kaltenbach Created: 2019 Parameters: Cutting range: 150 mm Wheel diameter: 450 mm Length: 1320 mm Width: 1020 mm Height: 2000 mm Weight: 1050 kg
BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...
Key data: 390 KW
Perkins 4008TESI-LC Containerised Natural Gas Cogeneration Plant. Hours: 0 Voltage: 400 V Scope of supply: Complete Cogeneration plant in container, gas heat exchanger, Control Panel WOODWARD EASY GEN 3000. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.
internal diameter: 800 mm grinding depth: 500 mm swing diameter: 850 mm total power requirement: kW weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max ...
Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition
Specifications: ✅ Brand: Previero ✅ Model No.: MU-408 ✅ Cutting chamber: 800 x 380 mm ✅ Rotor: Closed, inclined cut, water-cooled ✅ Engine: 75 kW (100 hp) ✅ Ideal for continuous work and high-density materials Common Applications: Shredding of technical plastics, purges, thick sheet, pipe, large parts Integration into recycling or extrusion lines Suitable for materials such as PP, PE, PET, PVC, ABS, PA, among others High production capacity with excellent crushing quality
Type: EFR2000/450 Serial number: 1713 Year of construction: 2008 Belt width: 450 mm Frying length: 2000 mm Frying time: 25 - 250 sec Heating: electric, 95 kW Power: 3 x 400V, 50Hz, 102kW Dimensions: 4950 x 2100 x 3600 mm Weight: 1900 kg Teflon infeed, hold down belt, sediment removal, electric hoists, circulation pump, oil level control Prepared for CO² fire extinguisher Separate infeed conveyor
Separator IFB 403 X-73 7500r/min 3-50/60Hz 230V Used tools
Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 Electric data: 24V ITOH-Deki condition: very good (used) Conveying length in mm: 1950 Nominal / outside width in mm: 540 Roll width in mm: 450 Roll division in mm: 75 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e- ...
Key data: 1500 KW, 1490 1/min
Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached
NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...
Nominal Power: 400 ton Stroke par minute: 16-48 Adjustable stroke: 10-250 mm Table dimension: 1200 x 1200 mm Ram dimension: 1200 x 1200 mm Distance table – slide: 1000 mm Adjustment slide : 200 mm Motovariator: 22-66 HP
TO WHOM IT MAY CONCERN ; WE VE 1 PC REBUILT AIR STARTER INGERSOLL RAND ST 499 IC 03L AT STOCK. ( EX STOCK ) PLS FIND DETAILS ON BELOW TYPE ST 499IC03L SERIAL NO. SP110221056 MAX INLET PRESSURE 90 PSIG MADE IN USA IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY
The foaming cabin from the manufacturer Cannon is designed for industrial use in foaming processes for steering wheels in the automotive industry. The foaming cabin is composed of a total of 5 steering wheel foaming cabins, the difference between them being that each cabin can be a different color for steering wheel foaming. Other auxiliary equipment that are part of the foaming cabin system: -tempering oven type UF 450 PLUS -installation material preparation -individual material preparation installation for each cabin depending on the color of the steering wheel Manufacturer: CANNON Model: A-Compact 40FC Year of Manufacture: 2017 Type of Machine: Foaming Cabin Air Pressure IN: 6/8 bar Control Unit: Control panel PLC Usable Materials: Isocyanate, Polyol Maximum Absorbed Power: 10.1 kW Acoustic Pressure: 81 dBA Find more here - / Contact us at -
REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)
Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg R410A refrigerant. 970 g 3 pieces in stock The air coolers were attached to newly acquired EDM machines. Due to the presence of a central water cooling system, the air coolers were dismantled before commissioning.
Used Robopack Ariane 4535ZT foil wrapper. "L" type sealer with integrated shrink tunnel.
x-travel: 560 mm y-travel: 560 mm z-travel: 630 mm Control: MSX 701 III MAPPS Main spindle:: Max. rpm: 14.000 min/-1 power capacity - main spindel: 18,5 / 11 kW max. Torque: 120 Nm tool taper: MAS BT 40 distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 100 - 730 mm pallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm max. workpiece height: 900 mm change time of pallets: 6,0 sec b - axis: 0,001 ° Tool-Presetter:: number of toolpositions: 60 pos. tool taper: MAS BT 40 max. tool diameter: 70 / (140) mm max. tool length: 400 mm max. tool weight: 8,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 m/min feed speeds: 0 - 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 35 kVA weight of the machine ca.: 9,8 t dimensions of the machine ca.: 5,5 x 3,5 x 2,8 m Docume ...
1-needle flat quilting machine, upper and lower wheel transport
Max pressure: 400 ton Table size: 1000 x 650 mm Between columns: 1000 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 9 ton Capacity: 400 ton
Vötsch VCS 4100 Climatic Test Chamber - 40 °C to + 180 °C Manufacturer: Vötsch Type: VCS 4100 Temp. range: - 40 °C to + 180 C Mains voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A KK-07 More items - new and used - can be found in our shop! International shipping costs on request!
Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten
Wide-chamber pin mill with grey cast iron housing, output / throughput: 600 kg/h max. (depending on material), required motor power: 12 kW to 22 kW (optional). Rotor and stator disc in very good condition. Cleaned, anti-rust primed and repainted. Rust protection inside can be easily removed before commissioning.
Behringer HBP 400 Depth of throat: 400 mm Max height of workpiece: 400 mm Length of band saw: 5800 x 38 x 1,3 mm Power needed: 5 kW Length : 2900 mm Depth : 2500 mm Height: 2100 mm Weight: 2,7 ton
Key data: 400 KW, 500 kVA, 400 V
The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months
Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Max. diameter to be rectified: 250 mm, Height of points: 125 mm, Max. grinding wheel diameter: 500 mm, Max travel X axis: 320 mm, CNC brand: FANUC, CNC model: 18TB, Main engine power: 7.5 Kw, Z and X axis resolution: 0.1 µmm, Workpiece holder head cone: MORSE 5, Ø of the hole in the workpiece holder head: 38 mm, tailstock cone: MORSE 4, Rotation speed of the workhead: 8 to 800 rpm, Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg
REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height
Sell several CO2 compressors, in good working order. Make bid for the lot
:::TECHNICAL SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 18-T Main spindle nose: ASA 11 Main spindle power: 37Kw Main spindle self-centering diameter: 450mm Main spindle bar passage: 117.5mm Turning diameter: 650mm Turning length: 1575mm Number of tool turrets: 1 Number of fixed tool positions for the first turret: 12 First turret X-axis travel: 370mm First turret Z-axis travel: 1575mm Tailstock: yes Steerer stroke: 150mm Chip conveyor: belt :::D DIMENSIONS AND WEIGHT::: Length: 4930mm Width: 2460mm Height: 2587mm Weight: 13690Kg
Manufacturer: Georg Model: 4518-3-07 Year of Manufacture: 2008 Material Processed: Cold-rolled steel strip Tensile Strength: 200 – 600 N/mm² Material Thickness: 0.4 – 4.0 mm Strip Width: 300 – 1650 mm Edge Scrap Width: max. 100 mm per side Strip Speed: 0 – 60 m/min Type of Machine: Edge Scrap Cutter with Trough Conveyor Find more here - / Contact us at -
We are selling here a belt descaler from the manufacturer Maja, type ESB 441 in a good used and functional condition. Runs on 400 volts, bandwidth 37 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 65/90/115 cm, others on request.
x-travel: 800 mm y-travel: 530 mm z-travel: 510 mm Control: MSC 504 Mori Seiki Main spindle:: turning speeds: max. 10.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle bearing diameter: 70 mm distance spindle /table: 150 - 660 mm work table:: table surface area: 1.100 x 600 mm max. table load: 800 kg T-slots: 6x 18 mm table height over floor: 900 mm turret:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,3 sec change-time chip to chip: 4,1 - max. 9,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 20 m/min feed speeds: max. 6.000 mm/min Tipp feed: 1 - 5.000 mm/min total power requirement: 27 kVA weight of the machine ca.: 6,1 t dimensions of the machine ca.: 3,5 x 3,0 x 2,8 m Documents: Chip conveyor: Co ...
Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS
; Power [PS]: 24; Gross weight [kg]: 650; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator., Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70
Inv. Num. : 8329 Type: KMX 413 Producer: MANURHIN Created: 2018 Parameters: Control system: FANUC Hours: 9473 h Max. rod diameter: 16 mm Number of axles: 4 plus 2 pieces Maximum spindle speed: 12000 1/min Spindle bore: 19 mm Spindle stroke: 130 mm Equipment: Collets Bar Feeder Spindle adjustment for 16 mm rod without adjusting the rod end
Manufacturer: NEFF Model: 4SP 160 Year of Manufacture: 2011 Operating Hours: 25 aprox Type of Machine: Hydraulic Press Weight: 7000 kg Condition: Used Control System: Siemens S7 (PLC) Technical Specifications - Press Force: 1600 kN (adjustable from 160–1600 kN) - Return Force: Approx. 160 kN - Stroke (Hub): 500 mm - Table Size (W x D): 2000 x 800 mm - Ram Size (W x D): 2000 x 800 mm - Clear Height (Ram Up): 700 mm - Max. Daylight (Open Height): 2850 mm - Table Height Above Floor: 800 mm - Clearance Between Columns (W x D): 1600 x 410 mm - Installation Space (W x D x H): 2000 x 800 x 700 mm Electrical System - Operating Voltage: 400V AC - Control Voltage: 24V DC - Valve Voltage: 24V DC - Frequency: 50 Hz - Voltage Fluctuation Tolerance: ±5% - Max. Ambient Temp: 35°C Find more here - / Contact us at -
Tos FA5AV X: 1400 - Y:420 - Z: 400mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 400 mm Admission in millinghead: ISO 50 Table size: 1600 x 400 mm Power needed: 20.5 kW Weight: 5300 kg
; Power [PS]: 24; Gross weight [kg]: 630; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: , - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator. , Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70
Used packaging machine made by Ulma, model: TF Optima 416. New: 2000.
Key data: 3000 mm, 850 mm
Crankshaft Grinder BERCO RTM 425 Center height mm.425 Max swing mm.850 Center distance mm.3000 Wheel flanges Rests Machine dimensions mm.7100 x2350 Weight approx Kg 9000 Perfect working condition
FAS roller conveyors 9000-410-350 RA2404 Further information Manufacturer: FAS Type: Roller conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (FL): 3x3000 mm = 9000 mm Roller width (RB): 350 mm Nominal/outer width (NB): 410 mm Roller pitch: 62,5-125 mm variable Drive types: center drive Gewicht Fördergut: bis 30 kg Optionally available e.g: frequency inverter for steples speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-415 condition: good (used) Conveying length in mm: 9000 Nominal / outside width in mm: 410 Roll width in mm: 350 Roll division in mm: 62,5, 130 Driven: YES scope of delivery: without supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with t ...
maximum number of results exceeded
please refine your search
