gravure 4 color used for sale

We sell 1200 x 32GB DDR5 4800MHz server RAM This will be available in 2 weeks. Manufacturer unknown at present. Photos not possible at present. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to compa ...

Key data: 1415 KW, 400 V

1 unit NATURAL GAS GENSET FOR SALE 1 x JENBACHER JMS 420 GS-NL - Power Total: 1,415 kWe CHARACTERISTICS ✓ Genset: Jenbacher JMS 420 GS-NL | Year of manufacture: 2008 | Power: 1,415 kWe | Fuel: Natural gas ✓ Engine: J 420 GS A05 | Year of manufacture: 2015 | Mechanical power 1,451 kW ✓ Alternator: Stamford | 1500 rpm | 50 Hz | 400 V AVAILABLE EQUIPMENT ✓ Complete genset on steel baseframe with auxiliaries ✓ Control panel Jenbacher | Gas valves Oil tanks | Exhaust manifold ✓ Spare parts: 6 cans of Jenbacher 4x spark plugs, thrust rings, gas filters, 5x bridge mod. S4, M-coil.. ✓ Jenbacher documentation related to the project STATUS ✓ Run hours of genset: 68.000 hours ✓ New shortblock was installed in 2015 by Jenbacher. Maintenance 30k hours was done by Jenbacher in 1st April 2022, at 30.753 run hours. ✓ Current hours of motor: 38.670 h. Genset s ...

Part number 7975 SPECIFICATIONS - Inlet width 450mm - Inlet height 250mm - shaft width 530mm - knife length 530mm - number of knives 2pcs - sieve dimensions 50x50mm - 2 gear pulling shafts from the bottom - lower shaft motor about 2.2kW - Pulling shaft geared from above - upper shaft motor about 2.2kW - conveyor belt - Conveyor belt length 6500mm - conveyor belt width 400mm - main motor 37kW - 0.37kW conveyor motor - autorever (adjustable) - overall dimensions of the machine l/w/h 2400x1300x1100mm - overall dimensions of the conveyor belt length/width/height 6600x610x550mm - weight about 2500kg – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – with a 6500mm conveyor belt – used chipper, very good condition Net price: 115900 PLN Net price: 27595 EUR depending on the price 4.20 EUR  ...

Part Number: 7973 SPECIFICATIONS - inlet width 410mm - Inlet height 210mm - shaft width 430mm - shaft diameter 330mm - knife length 430mm - number of knives 2pcs - sieve dimensions 50x50mm - Pulling shaft geared from below - 1.1kW lower shaft motor - Pulling shaft geared from above - 1.1kW upper shaft motor - vibroryn - vibroline length 4160mm - vibroline width 370mm - main motor 45kW - autorever (adjustable) - reverse gear - overall dimensions of the machine l/w/h 2150x1450x1050mm - Overall dimensions of the vibroline l/w/h 4160x650x880mm - weight about 2500kg ADVANTAGES – German production – autorever (adjustable) – protects the machine from blockage and damage in case of overload – reverse gear – DTR documentation – used chipper, very good condition Net price: 73900 PLN Net price: 17595 EUR depending on the price 4.20 EUR (Prices may cha ...

PART NUMBER 7948 Specifications: - track width 400mm - shaft working width 400mm - max disc diameter (350mm fitted) 450mm - blade bore diameter 70mm - max cutting height (with a blade of 450mm) 160mm - Table top width with widening 710mm - table top length 1900mm -in advance: - 2-row ratchets/flasks - Slip roller, metal, pressure roller - Ratchets/Fluffers - Slip roller, metal, pressure roller - shaft with saws - Smooth, metal, sliding roller -from the bottom: - guide strip - latches - Caterpillar - Electric body lift - central track lubrication - 2 types of feed speed + smooth - total power 32kW - overall dimensions l/w/h 2050x1800x1530mm - weight about 2000kg ADVANTAGES: – Italian production – very good condition – DTR documentation – used multi-saw Net price: 48900 PLN Net price: 11643 EUR depending on the price 4.20 EUR (Prices may c ...

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 585 x 400 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 632/400/H35 mm -Weight: 6.3 kg/pc.

Sell a high-quality, robust liquid ring vacuum pump from the premium manufacturer Siemen & Hinsch (SIHI Sterling) in excellent, visually and technically well-maintained condition. This LEMA 425 model is an absolute workhorse in industrial technology, known for its extreme reliability, durability and ability to convey even wet gases or vapours without any problems. The pump is single-stage and is directly driven by a powerful 11 kW electric motor. Technical data (according to nameplate): • Manufacturer: Siemen & Hinsch mbH (SIHI), Itzehoe Germany • Type: LEMA 425 AZ AA14B0 SB • Pumping speed : 270 m³/h • Speed : 1450 1/min • Suction pressure : 33 mbar • Overpressure : 0 bar • Engine power : 11 kW • Year of construction: 1995 • Pump No.: D-5078023 • Certification: CE marking

ABG Vectra 410 mm 16 inches – Automatic Turret rewinder – Nice machine for long runs ABG Vectra STR 410 Autmatic Turret Rewinder Machine Details: Manufacturer: ABG International Product Line: Vectra Model: ABG Vectra STR 410 (Turret Rewinder) Web Width: 410 mm (16") Date of Manufacture: August 2008 Characteristics of he turret rewinder 410 mm web width Four-spindle turret rewinding system Automatic roll change capability Hot-melt tail sealing system Swing-arm mounted operator control panel Vectra-series machine frame and guarding 410 mm web width Automatic turret rewinding system Hot-melt tail sealing Manufactured: August 2008 Supplied by ABG International, United Kingdom The electrical cabinet documentation The machine manual

SILOMA OL 420A NC metal band saw was built in 2018 in Bulgaria by SILOMA JSC. The machine is designed for precision cutting of workpieces with round, square and rectangular cross-sections at 90° angle. It also enables bundle cutting, i.e. the simultaneous machining of several workpieces in one working cycle. This makes the SILOMA OL 420A NC the perfect choice for professional production plants specialised in series and mass production. Cutting is performed by a reliable saw blade, driven by a powerful electric motor. The cutting speed is adjustable in the range from 15 to 100 m/min. All operating parameters are programmed in the intuitive NC controller with touchscreen display, which facilitates operation, provides access to key information and allows quick programming of work cycles. The SILOMA OL 420 A NC band saw weighs 2500 kg. Technical specifications of the SILOMA OL 420A NC ...

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 307 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 1x pumps available -Price: per piece -Dimensions: 130/90/H120 mm -Weight: 3.4 kg/pc.

Transformer AEG 10KV 400V

chamfer lenght: 1530 mm plate thickness: mm distance between columns: 1530 mm pressure: 40 t stroke length max.: 300 mm travel -x axis: 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Varian Flat Panel Detector PaxScan 4030 A Size: 30 x 40 cm Part Number: 21206 Date of manufacture: 2006 Technology: amorphous Silicon (A-Si) Flat Panel Typical applications: DR X-ray systems, industrial imaging, materials testing Condition: used, removed from functional system (Varian Acuity EX therapy simulator) Applications: Replacement of existing Varian-based DR systems, components for service and repair companies, research & development • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried ...

Trixell Flat Panel Detector Pixium 4600 Active area: 43 x 43 cm Part Number: 100204 Date of manufacture: 2006 Technology: amorphous Silicon (A-Si) Flat Panel Areas of application: Replacement for existing Trixell-based DR systems, components for service and repair companies, research & development • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • We are dealers of used medical devices. We do not repai ...

Trixell Flat Panel Detector Pixium 4700 Size: 30 x 40 cm Part Number: 61166546 Date of manufacture: 2006 Technology: amorphous Silicon (A-Si) Flat Panel Typical applications: fluoroscopy, radiography, C-arms, angiography Condition: used, removed from functional system (Siemens AXIOM Artis dTA) Areas of application: especially suitable for Siemens AXIOM Artis dBA, dFA, dTA or dMP • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • You buy the detector in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration o ...

Roller conveyor, conveyor belt, roller track, roller aisle -Roller conveyor: 2-part 3.24 m / 3.36 m / height adjustable -Roller width: 140 mm -Rollers: Ø 50 mm -Roller spacing: 140 mm -Price/Fee: complete -Dimensions: 3240/350/H1090 mm / 3365/350/H1090 mm -Total weight: 160 kg

NILPETER FA 4250 Year: 2007 Working width: 420 mm Number of units - 8 8 UV colour stations + hot air drying on 8 station Installed new UV drying system – GEW E2C (year 2020) Servo driven Water cooling-chill rollers Printing cylinders and anilox in sleeve version Unwinding (roll max. 1000 mm) Roll splicing table Corona Lenghtwise waste cutting with waste removal Table for roll-sheet cutting Software for cold foil printing Winding with pressure roller (roll max. 1000mm) Video monitoring camera Printing film 25-300 my Automatic register Included 10 anilox rollers Included 8 sleeve print cylinder (552,45mm) Machine in production On sale bacause purchasing new machine

Key data: 6500 mm, 2013 , 80

Screw diameter: 80 mm Injection weight in polystyrene: 2013 g Clamping force: 6500 kN Screw diameter: 80 mm Stroke volume: 2212 cm³ Injection weight in polystyrene: 2013 g/hp Injection pressure: 2,090 bar Clamping force: 650 t Lights Tie-bar spacing H x V: 1040 x 910 mm Tool installation height - min.: 400 mm Opening distance: 500/1350 mm Microprocessor control: KEBA 2985- 15' tou screen Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / Without water battery: -/- Pump drive power: 65 kW Total connected load: 84 kW Total weight: 28,000 kg Total size: 7.7 x 2.6 x 2.7 m Payment terms: 100 % before taking over the machine, net only

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet, solid construction with 8 drawers -Width: 420 mm -Depth: 625 mm -Height: 1350 mm -Drawers: See photos for layout/height -Door: lockable, without key -Weight: 74 kg

Electric motor, three-phase motor, vibration motor, industrial vibration motor -Manufacturer: OLI MVE, Electric Vibration Motor -Type: MVE 500/15N-4OAO -Power: 0.25 kW -Speed: 1400 rpm -Protection rating: IP66 -Dimensions: 330/175/H195 mm -Weight: 20.9 kg

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Strapping machine, strapping kit, tensioning and sealing device, textile strapping kit -Dispensing trolley: Mobile dispensing trolley for plastic strapping, without accessories -Transport dimensions: 400/390/H520 mm -Weight: 11.1 kg

Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber elastic band with steel band -Tire size: Ø 420 mm -Inner diameter: 305 mm -Quantity: 1 tire available -Dimensions: Ø 420 x 75 mm -Weight: 9.4 kg

Plastic shaft, plastic material, plastic wave, shaft material made of plastic, polyamide round bar -Plastic shaft: Polyamide solid material round bar -Diameter: 405 mm -Length: 1115 mm -Quantity: 1 piece available -Weight: 118 kg

Plastic shaft, plastic material, plastic wave, shaft material made of plastic, polyamide round bar -Manufacturer: Röchling, POM-C plastic shaft, polyamide solid material, round bar -Type: Sustarin-C natura Ø 280 mm l -Item No.: 141275 -Length: 445 mm -Dimensions: Ø 280 x 445 mm -Weight: 40 kg

; Power [PS]: 449; Gross weight [kg]: 3600; Engine: Iveco CURSOR9TE9; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 595

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

; Gross weight [kg]: 4670; Engine: Cummins QSNT-G3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 650

; Gross weight [kg]: 1072; Engine: Cummins 4B3.9-G12; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 1060; Engine: Cummins 4B3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 1102; Engine: Cummins 4BT3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 1330; Engine: Cummins 4BTA3.9-G11; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120

; Power [PS]: 68; Gross weight [kg]: 1176; Engine: Cummins 4BTA3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87

; Gross weight [kg]: 1214; Engine: Cummins 4BTA3.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87

Cooling system: Heat exchanger cooled; Gross weight [kg]: 950; Engine: Cummins 4BTA3.9-GM47; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 800

; Gross weight [kg]: 4667; Engine: Caterpillar C13; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842

Automatic Transfer Switch - ATS Panel - ATI Panel, 400 Ampere - Applicable for generators up to 275 kVA; Gross weight [kg]: 85; Registration Number: 4

Automatic Transfer Switch - ATS Panel - ATI Panel, 45 Ampere - Applicable for generators up to 25 kVA; Gross weight [kg]: 35; Registration Number: 6

Automatic Transfer Switch - ATS Panel - ATI Panel, 1250 Ampere - Applicable for generators up to 435 kVA; Gross weight [kg]: 90; Registration Number: 6

; Gross weight [kg]: 9613; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Inside dimensions: 1182022002650 (LWH in mm); Accessories: 40FT HC Brand New Genset Container

; Gross weight [kg]: 570; Engine: Yanmar 4TNV98C; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including sockets:, - CEE 63A - 400V - 5P, - CEE 32A - 400V - 5P, - CEE 16A - 230V - 2P; Water Tank Volume [l]: 70

; Gross weight [kg]: 1250; Engine: JCB 448 TWGA; Accessories: Control Panel, Control cabinet including DSE panel and start-stop (shipped loose), Remote start ready, 12V starting motor and alternator, Double and switchable fuel filter, Pre-filter (shipped loose), Double walled fuel lines with leakage detection, Oil d

; Gross weight [kg]: 1005; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140

; Gross weight [kg]: 1232; Engine: Perkins 1104A-44TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87

; Gross weight [kg]: 1215; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120