gravure 4 color used for sale

2 Reactor atmospheric

Electrode welding machine Manufacturer Kemppi Type TYLARC453 Power 450 amps at 35% ED, 345 amps at 60% ED 265 amps at 100% ED Power 20kw, 21kva Power connection 400 Volt Weight approx. 250kg Machine ready for demonstration under power. Shipping on Euro pallet possible. Price is net plus 19% VAT Please note our "Legal Information" with further information

Tools are under good condition.

Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - ...

Key data: 1500

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 85,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status : Rebuild done at 60,000h Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 7 Reference number: S 145 Condition: Used in good condition Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Height pliers, parallel pliers, height transfer gauge, height transfer measuring device -Manufacturer: Hommel Werke, height transfer theory -Type: 4626 DBP -Dimensions: 165/140/H430 mm -Weight: 7.6 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA52 DT71D-4BMG -Speed: 9.3 rpm -Power: 0.37 kW -Hollow shaft: Ø 40 x 120 mm -Protection class: IP54 -Brake: 5 Nm -Bearing block: THK HSP 30 -Dimensions: 520/260 / H285 mm -Weight: 36 kg

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Available in stock 1 x Used Fuel Injector Nozzle Tester (400 bar). The equipment is used but in good working conditions.

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator -Manufacturer: Siemens, servomotor -Type: SQN30.402A2730 -Dimension box: 155/115/85 mm -Weight: 0.7 kg

The scope of delivery includes: 01x roller conveyor stand, used Total width with base plates: 475 mm Frame width: approx. 445 mm Minimum height: approx. 640 mm Maximum height: approx. 870 mm Total depth with base plates: approx. 160 mm Frame profile illustration: C 80 x 35 x 12 mm Connection strut fig.: approx. 380 x 60 x 50 mm Mounting plate abm.: approx. 140 x 135 x 3.00 mm Borehole Ø: approx. 9 mm Borehole distance: approx. 100 mm Material thickness frame profile: approx. 2.50 mm Material color: sendzimir galvanized

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Martonair Type SM/040 400 -Stroke distance: 400 mm -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Dimensions: 690/112/H112 mm -Weight: 11.4 kg

Machine light, machine light, work area light, system light, compact light -Manufacturer: Rittal, LED system light SZ 4140.840 -Price: per piece -Numer: 3 pieces -Dimensions: 525/50/H30 mm -Weight: 0.4 kg/piece

For sale: Cardboard Packer Meurer CM/TP 25-B 400. The machine worked in the Tetra Pak line. Carton type: 1000 ml Prisma on request, I will send a description of the machine and photos.

offer 22537 Specifications: - working width 4040 mm - cutting capacity St 40 6 mm - Cutting angle hydro.adjustable 0.5 - 3 ° - Cutting gap adjustment hydr. - Number of hydraulic hold-downs 22 pcs -Mot. – Backgauge with positioning control 10 - 1000 mm - front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 p/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - with: - E-foot switch - Cutting line lighting - Pneumatically supported sheet metal lifting

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433

Clamping table, clamping angle, T-slot table, rotary table, milling machine table, turning table -Table area: approx. 1550 x 420 mm -Grooves: 5 piece 16 mm -Dimensions: see photo -Total dimensions: 1630/420/H180 mm -Weight 461 kg

Metal band saw, band saw machine, vertical band saw -Passage width: 380 mm -Passage height: 230 mm -Table: swiveling -Speeds: 12 pieces min: 45 rpm max: 800 rpm -Dimensions: 1150/715/H1900 mm -Weight: 522 kg

Adjustable traverse, crane traverse, traverse for pillar slewing crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Carrier dimensions: 360 x 150 mm (narrow I carrier) -Total dimensions: 4240/240/H630 mm -Own weight: 400 kg

Planetary gear alpha, SP 140S-MF1-7-4G1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - Shaft D32mm, - centering D130mm - Output side for shaft D24mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

TecHouse/Multigraf shed delivery tape 482.112; good condition; cleaned and tested; Length 1100mm; Width 340mm; sensor for automatic control; Speed adjustable; height adjustable. TecHouse/Multigraf stream delivery 482.112; good condition; cleaned and checked; Lenght 1100mm; width 340mm; sheet detection sensor for stop and go mode; adjustable in speed; adjustable in hight.

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

Engine Make PERKINS Engine Type 4016TA02 Power KW / kVa PRP 1766 / 2367 Fuel DIESEL Generator Model LEROY SOMER Volts 400 Hz 50 Year of Manufacturing 2000 Running Hours 292

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 24 x 48 mm -Construction: B5 -Protection class: IP 44 -Number: 2x motors available -Price per piece -Dimensions: 350/270 / H250 mm -Weight: 20 kg

Electric motor, three-phase motor -Power: 5.5 kW -Speed: 2828 rpm -Shaft: Ø 32 x 80 mm -Construction: B5 -Dimensions: 450/330/H300 mm -Weight: 57 kg

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

Domino A 400 printing system; 6 print heads; Ink starling; Documentation. Printing system Domino A 400; six heads; Inkjet; Manuals.

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Through hole: Ø 28 mm -Recording: approx M77 x 6 -Weight: 41 kg

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

Electric motor, three-phase motor -Manufacturer: Caenaho, electric motor from milling machine Stankoimport 6P / 2 -Type: 4A132S4Y3 -Power: 7.5 kW -Speed: 1450 rpm -Voltage: 220/380 V -Shaft: Ø 38 x 80 mm -Construction: B5 -Dimensions: 470/348 / H370 mm -Weight: 82 kg

Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.

Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor Manufacturer: Siemens, air damper actuator -Type: SQN70.464A23 -Quantity: 2 pieces available - Price: per piece -Cardboard dimensions: 150/100/70 mm -Weight: 0.4 kg/piece

Circuit breakers, motor protection switches, star-delta switches, reversing switches -Siemens: Sirius type 3RV1031-4DB10 -Current strength: 18 - 25 A. -Dimensions: 150/60/H160 mm -Weight: 1.1 kg

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

Power supply, converter, converter, power supply unit, Smart-UPS -Manufacturer: APC Smart-UPS SC 420 -Voltage: 220-240 V/50/60 Hz/2.3 A -Accessories: VA bracket -Dimensions: 375/130/H175 mm -Weight: 9.1 kg

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.