129,386 used machines on RESALE, but how to find them? Machine Search
90° roller curve left + 880 mm straight piece as combination Make: Dematic Rolling curve: 90° link running Width: 440 mm Nominal width (overall width incl. sidewalls): 500 mm Inner radius of the curve: 765 mm Straight piece: Length: 880 mm Width: 440 mm Total width: 500 mm Roles, bright zinc-plated Scale: 70 mm Gearmotor: Make Franz Bangert optional Guide on both sides 3 support Height role OK 800 +/-100 mm Features: Running direction: LEFT condition: very good (used) Nominal / inner radius in mm: 765 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES Engine type: Franz Bangert Getriebemotor scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung ...
2x Bitzer Compressor CO² 4ESL-9K-40S (piece 1800) 2x Bitzer Compressor 4EHC-6K-40S (piece 1200) very good condition Please take data from the pictures
Schulz roller curve conveyor left with straight section 90°-450-390 IR795 +1875-450-390 Rolling curve: 90° link running Width: 390 mm Nominal width (overall width incl. sidewalls): 450 mm Inner radius of the curve: 795 mm medium-RADIUS: 1,000 mm Straight piece: Length: 1,875 mm Width: 390 mm Total width: 450 mm Roles, bright zinc-plated Division: 75 mm Geared motor: 0,25 kW Conveyor speed: v = 0,3 m/sec. Drive: round curved belt + straight piece Page management: optional Support: optionally available Height role OK 800 +/-100 mm Features: Drive type: Round belt condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 450 Roll width in mm: 390 angle: 90° Driven: YES scope of delivery: including side guides without supports Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach tel ...
Schulz roller curve conveyor left with straight section and pusher 90°-450-390 IR795 +1600-450-390 RA1203 Roller curve: Manufacturer: Schulz Angle: 90° left Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1600 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm including 90° chain pusher, chain spacing 450 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt curve + straight section 2. electric drive for chain scraper Side guide: included on both sides, as illustrated Scope of delivery: without supports (please enquire if 3 supports are required) Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: after receipt of payment approx. 3 - 5 worki ...
Schulz roller curve conveyor right with pre- and post-run 90°-450-390 IR1570+2x250-450-390 RA1187 Roller curve: Manufacturer: Schulz Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR) = 1570 mm Speed: v = 0.33 m/s Straight section: Conveying length (FL): 2x 250 mm, inlet and outlet Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 2000 x 800 x 400 Transport weight: 120 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running directio ...
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1201 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outside width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: incl. lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round belt condition: very g ...
Schulz roller curve conveyor right with straight section and pusher 90°-450-390 IR795+650-450-390 RA1200 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Center radius: 1,000 mm Straight section: Conveyor length (FL): 650 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers, galvanized Pitch: 75 mm Conveying gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: Round belt curve + straight section 2. electric drive for chain scraper Shipping dimensions: LxWxH: 2100x700x800 mm Scope of delivery: incl. side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running di ...
Schulz roller curve conveyor right with straight section 90°-450-390 IR795+1350-450-390 RA1206 Roller curve: Angle: 90° right Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 1350 mm Usable width (NUB): 390 mm, transfer point 350 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Gear motor: 0.25 kW Conveying speed: v= 0.3 m/sec. Drive: round belt continuous curve + straight section Scope of delivery: including lateral guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: RIGHT Antrieb: SEW Getriebemotor nominal voltage: 380-500V Drive type: Round ...
Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...
Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal ...
Stephan micro cutting and vacuum mixing plant, consisting of: Stephan Mikroschneider, machine type: MCH 20/VM, machine number: 726.107.02, year of construction: 2000, 400 V, 50 Hz, 26 A, 2925 min-1, (2x) Stephan Vacutherm mixing plants, machine type: VM/MC 450/450/20, machine number: 726.107, year of construction: 2000, 400 V, 50 Hz, 76 A, 42 kW, volume tank: 485 liters, permissible operating pressure container: -1 / 0.3 bar, permissible operating temperature container: 95 °C, Volume jacket: 38 liters, permissible operating pressure jacket: 4.0 bar, permissible operating temperature jacket: 152 °C, (2x) Fristam rotary lobe pumps, type: FLFNS 100L, pump number: 69244005 and 69244004, Packo centrifugal pump, type: ICP2-32-160/352, serial number: 30071, year of construction: 2000, Q: 30 m³/h, overall dimensions mixing plant: 4900 mm x 1950 mm x 3400 mm, incl. s/s platform with stairs, di ...
1 color Offset Press Serial-No. 414 11507 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
1 color Offset Press Serial-No. 41A442 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Size: 470 x 660 mm Impression: 25 Mio. Equipments: Console DTC (Sakurai Delivery Top Console) with Touch Screen . Full Remote Control Operation : SIS (Sakurai Inter Active System) for make ready Plate Running Register system SAS (Sakurai Auto Set) for Paper size and thickness SPC (Semi-automatic Plate Change) Cocking Register Automatic Washers: Blanket Cylinders & Inking Rollers Olivermatic Dampening Baldwin Refrigeration System & Bal Control Feeder with Suction-belt feed table Electronic Double Sheet & Side lay Detector Chromed Impression Cylinders Perfector 4/0 - 2/2 (Full automatic) Semi-High Pile delivery Powder Sprays Including: Plate Punch, Compressor Tools and Manuals
Size: 520 x 740 mm Impression: 204 Mio. Equipments: Max. printing speed: 15.000 sheets per hour
used
Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours
Cooling unit Bitzer 4P-10.2Y-40P with condenser condenser for TK or Plus cooling. For more information call 00436641838175 or Info@frigocom.at
2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB
Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.
MSE 470/10 Product no.: RE-HU-2014-0412-1 Attachment: Chamber filter press, drip sealing used Usage area: Chamber filter press Design: page Holm led Year of construction: 2002 Filter plate format: 470 x 470 mm Number of plates: 10 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 3.3 m ² Presses contents: approx. 48 dm3 Filter pressure: 15 PSI Plate transport: manually Pumps: optional Buying or renting: Visit the facilities in consultation with us to work. You want to rent this facility or to buy? Contact us, we are available. There are two identical facilities are available.
Keyboard for Maho machines Philips 432/9. Please note: Board and pot are not included in the offer; New
To check torque on air and electric screwdrivers.
System: Used decanter / centrifuge Manufacturer: Flottweg Model: full coat screw centrifuge Type: Z53-4/454 . No.: 007-135-03 B.: 1999 Drum: max speed. 3250 min-1 Drum inner diameter: 529 mm Drive motor drum: Lander Type: ANGA-225ME-04A Voltage: 400 V Service: 55kW, 105A, 1465 U/min Hyraulikaggregat: Loher 1450 RPM Buying and renting possible.
new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions inspection gantry safety lid CE-approved variable speed plc control overall dimensions (l x w x h) : 1.970 x 1.000 x 1.600 mm (open lid: H: 2.250 mm) Quick & Clean system Seals of mix axles easy and quickly disassembly and monolithic seals + Loader for eurobins
DEUTER 480 m2, 16x30 m, 5 m high high high high-speed steel hall / Steel Construction Year 1998 - Insulation / Sandwich Panels & Heating - Snow load zone 2 = 85 KG / m2 - no statics available / flying buildings, - Location North Germany - easy assembly / self-assembly, Year 1998
Veneer Vertical Slicer Manufactured by Angelo Cremona
Veneer Slicer, model TN 4000, manufactured by Angelo Cremona
Rexroth Controller 4WRKE27W3-500L3X/6EG24 MNR: R900972662 MNR: R900619277 for Krauss Maffei
Linear drive, stroke 420mm, DGPL-80-420-PPV-A-KF-B, 161797, Festo, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used and tested! The part was purchased from a spare parts warehouse of a company, was tested by us and checked for leaks. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions appl ...
VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg
For sale we offer new scissor roller conveyor. Roll width 610mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 4 pieces Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.100€ net plus VAT If you are interested, please contact us to confirm availability.
For sale we offer new scissor roller conveyor. Roll width 760mm Length retracted 1500mm Length extended 4000mm Height 690-1000mm Load capacity 130kg/m Quantity available: 1 piece Other lengths available in stock: 8 and 10m Shipping worldwide Price per piece 4.500€ net plus VAT If you are interested, please contact us to confirm availability.
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV B7ssq0vkzj Year of construction : 2012 Condition : New with 1 year warranty Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.
Servomotor, 330V, 4000 rpm, B2.SM.000-4400, KEB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Unfortunately, the packaging is not visually perfect on the outside., - Shaft D11mm, centring D60mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our ...
AVK rotating frequency converter 50 to 60 Hz with AVK generator DKBN120K/490-12TS and AVK motor DKMBN 120L/400-10TS for sale used in working condition. You can also purchase only the generator or engine (on request). Frequency converter from 1986, complete with motor (50 Hz) and generator (60 Hz). Motor: 345 kW x 1,500 rpm, 400 V/50 Hz Generator: 400 kVA x 1,500 rpm, 380 V/60Hz Year of construction: 1986 Weight [kg]: 7.952 Dimensions LxWxH [cm]: 475x110x160 Generator AVK DKBN120K/490-12TS Manafacture: AVK Model No.: DKBN120K/490-12TS Type: air-cooled AC generator Serial Number: 5639822 Engine DKMBN 120L/400-10TS Manafacture: AVK Model No.: DKMBN 120L/400-10TS Type: AC motor Serial Number: 5639825
Description: Type : Oil transformer Finish : Hermetic Make : SGB Year of manufacture : 2016 Condition : New Rated Power : 4200 KVA Medium voltage : 22KV +- 2X 2.5% Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Type of cooling : ONAN Gross vehicle weight : 9030 kg Weight of oil : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.
Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg
Doka steel prop. • Effortless loosening of the adjustment nut due to special thread geometry • Less effort due to low weight • safe to use due to consistently high load capacity of at least 30 kN according to EN 1065 – • Easy height adjustment through hole numbering 35x columns Doka Eurex 20-300 top, used EUR 59,00 per piece 1x Doka stacking frame, galvanized, used, 1,55x0,85 EUR 105,00 per piece
Machine crossing with platform (bridge) 4570-880-2600 RA1996 Technical data: Manufacturer: In-house production Type: machine crossing with pedestal Condition: very good (used) Total size: 4570-880-2600 mm (WxDxH incl. handrail) step dimensions: 240 x 800 x 35 mm step/tread height: 200 mm platform dimensions: 850 x 800 mm Platform height: 1400 mm bottom edge 1600 top edge Steps: 8 (7 steps + platform on each side) Weight: 390 kg Next TÜV: 02.2023 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg
Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg
Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm
Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm
Mitteltrennschnitteinrichtung - 4th and 5th knife attachment for Trimmer Müller Martini 4th-5th knife Year 1999 - Serial-No. DSS 2609 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Stanzwerkzeug 4x4 3:1 Daumenloch - Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Arbeitsbreite / Working width 550mm Stanzwerkzeug 4x4 3:1 Daumenloch für KUGLER-WOMAKO ProPunch 50-110 Punching tool 4x4 3:1 thumb cut for KUGLER-WOMAKO ProPunch 50-110 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
MIG/MAG welding machine -Max. welding power: 400 A -Four-roller feed -Water-cooled -Hose package -with removable wire feeder -incl. ground cable -Gas valve
maximum number of results exceeded
please refine your search
