gravure 4 color used for sale

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-19

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-18

Years of manufacture vary - 2013 - 2015 Height: 4470mm Auction-ID: A7-45974-20

Cutting Machine – Technical Specifications General data: Slide travel: 500 mm Workpiece support height: 500 mm Cutting capacity (oxy-fuel): With 1 torch: max. 300 mm thickness With 4 torches: max. 100 mm thickness With 6 torches: max. 60 mm thickness Cutting capacity (plasma): With 1 plasma torch: depending on plasma system power Speeds: Working speed: up to 12000 mm/min Positioning speed: 15000 / 20000 / 35000 mm/min Gas inlet pressures (oxy-fuel cutting): Cutting oxygen: 11.5 – 12.0 bar (OmniFlow) Preheating oxygen: 9.0 – 10.0 bar (OmniFlow) Heating oxygen: 1.8 – 2.0 bar Air: 5.0 – 6.0 bar Water: 2.0 – 6.0 bar Gas inlet pressures (plasma cutting): All gases: 12.0 bar Description: Industrial cutting machine designed for oxy-fuel and plasma cutting applications. The system supports multiple torch configurations and offers high cutting capa ...

serial number 117310074 Auction-ID: A7-46062-8

MAN TGS 33.540 6x4 BL – Truck with Loading Crane General data: Manufacturer: MAN Model: TGS 33.540 6x4 BL Serial number (VIN): WMA30SZZ9BM567249 Year of manufacture: Unknown Condition: Used Power: approx. 540 HP Drive: 6x4 Gross vehicle weight: approx. 26000 kg Dimensions (L x W x H): approx. 10000 x 2550 x 3800 mm Equipment: Hydraulic loading crane Crane: Kogel, 10 ton-meter, hydraulic telescopic arm + rotor + grab Reach: approx. 9 – 10 m Lifting capacity: approx. 3500 kg (close range) to 1000 kg (full extension) Maximum pulling force: 200 kN Trailer coupling Timber stakes for log transport Reinforced chassis Multi-axle configuration Description: Heavy-duty truck equipped with a hydraulic loading crane, designed for forestry, recycling, and construction applications. The vehicle allows self-loading and unloading of bulky materials such as logs, scrap, or ...

Cardboard boxes 1,200 x 300 x 400 mm and 1,200 x 300 x 200 mm each approx. 150 pieces on a pallet

Chain slings 2-arm approx. 40cm, 2 pcs., with steel cables

Cable Reel WÜRTH 40m H07RN-F3G1.5 mm²

Bolt Setting Tool SPIT P60 BS 4078, SN 001002 Small quantity Accessories, Case

Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-94

Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-334

6\" Hydraulic pressure 4500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 640 x 240 x 155 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-91

Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-284

4 UNITS/SETS OF SDM0070 PACKED TOGETHER. A SINGLE SDM0070 CORRESPONDS TO: Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0070 PACKED TOGETHER: 370 x 680 x h70 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-48

Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-265

3 UNITS/SETS OF ATT0037 PACKED TOGETHER. A SINGLE ATT0037 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0037 PACKED TOGETHER: 550 x 1050 x h110 mm - 210 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-115

Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws Machine condition: unchecked. Approx. Transport dimension: LxWxH 500 x 470 x 245 mm; Approx. Weight: 74kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-208

4 UNITS/SETS OF SDM0071 PACKED TOGETHER. A SINGLE SDM0071 CORRESPONDS TO: Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0071 PACKED TOGETHER: 920 x 680 x h45 mm - 12 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-5

Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-110

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-85

With 2x roller conveyor dimensions 3000x470x870 mm Auction-ID: A1-43429-93

Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-339

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-154

40kvA current power; 1,500 rpm; 4-cylinder Deutz engine oil-cooled; 3.1l displacement; Linz-Stamford Generator; AC output: 1 x 400V 32A, 1 x 400V 16A, 1 x Schuko 16A, 1 x Schuko 230V; Electric starter; Power failure detection AMF (Automatic Mains Failure); Automatic Switch Transfer (ATS) emergency power system; Operating time at 50% output approx. 28 hours (157l tank capacity); Auction-ID: A1-46030-12

4 UNITS/SETS OF SDM0070 PACKED TOGETHER. A SINGLE SDM0070 CORRESPONDS TO: Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0070 PACKED TOGETHER: 370 x 680 x h70 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-140

6\" Hydraulic pressure 4500 kg. Material: cast iron, Model: full size, Use: lathe Machine condition: unchecked. Approx. Transport dimension: LxWxH 640 x 240 x 155 mm; Approx. Weight: 48kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-234

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 550 x 350 x 110 mm; Approx. Weight: 70kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-344

3 UNITS/SETS OF ATT0039 PACKED TOGETHER. A SINGLE ATT0039 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0039 PACKED TOGETHER: 650 x 1350 x h185 mm - 348 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-129

4 UNITS/SETS OF SDM0071 PACKED TOGETHER. A SINGLE SDM0071 CORRESPONDS TO: Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0071 PACKED TOGETHER: 920 x 680 x h45 mm - 12 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-285

9400 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, DVI, SDI, DIGITAL LINK; electrical connection: 100-240 V - 50/60 Hz; Color: Black Auction-ID: A7-46311-10

Technical Specifications Table dimensions: 4000 x 1000 mm Notes: Height 305 mm Item sold in unverified status Auction-ID: A1-44614-14

9400 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, DVI, SDI, DIGITAL LINK; electrical connection: 100-240 V - 50/60 Hz; Color: Black; Dimensions of transport box: 100x80x57 cm (L/W/H), total weight: 87 kg Auction-ID: A7-46311-11

Machine type: Injection moulding machine Manufacturer: ENGEL Model: Duo 3550/400 Pico Year of manufacture: 2013 Serial number: 191000 Clamping force: 400 t Clamping system: Two-platen Hydraulic system pressure: up to 160 bar Drive system: Servo-hydraulic ecodrive inside” Pump motor power: 30 kW Total installed power: approx. 45 kW Power supply: 400 V / 50 Hz / 3-phase Control system: ENGEL CC300 control unit Control features: Colour touchscreen, integrated process monitoring Equipment / Features: - Automatic central lubrication system - Safety interlocks on operator and service sides - Energy-efficient servo-hydraulic drive - Designed for large technical and automotive moulding applications Overall dimensions (L x W x H): approx. 6800 x 1900 x 2400 mm Own mass: approx. 11,000 kg Auction-ID: A7-46307-1

SKF - Batch bearing housing, various bearings and components 44KG/li> Auction-ID: A1-46070-173

FAG / SKF - Batch of industrial bearings 499KG Auction-ID: A1-46070-220

SKF / FAG - Batch of large various industrial bearings 420KG Condition: unused Auction-ID: A1-46070-144

SKF - Batch of drive shafts & CV joints 245KG Condition: unused Auction-ID: A1-46070-150

FAG - Batch of bearings and cast iron bearing housings 441KG Auction-ID: A1-46070-305

Classic motorized bicycle equipped with Motori Minarelli \"Mosquito\" 48cc engine. Vintage vehicle intended for restoration or collection. It is sold in the condition it is in, without a functional check. The Minarelli Mosquito engine is a model recognized in the classic moped sector, which adds additional value to the whole. Status: - Used - Unverified operation - Possible signs of wear and use Note: On-site inspection is recommended. The lot includes only what is visible in the photographs. Keywords: motorized bicycle, bicycle with motor, classic moped, classic motorcycle, classic vehicle, Minarelli engine, Minarelli Mosquito motori, Mosquito 48cc, antique moped, vintage bicycle, collector's vehicle, restoration project, classic motorcycle restoration, antique vehicle, antique motorcycle, vintage moped, classic bicycle restoration, bicycle auxiliary engine, histo ...

Schneider Electric (Clipsal) - 4CBEM1 / 4CBEM2B / 4CBEM2T - Batch energy sensors Condition: unused Auction-ID: A1-46070-193

FAG / TIMSA - Batch of industrial bearing housings 459KG Condition: Used Auction-ID: A1-46070-136

FAG / SKF - Batch of industrial bearings 499KG Weight: 1500KG Auction-ID: A1-46070-16

Batch of parts mix (including Siemens SIMOTICS/SIMATIC) Weight: 126KG net Auction-ID: A1-46070-330

SKF - VKJC 4038 AT & VKJA 2213 A - Batch of car parts 164KG Auction-ID: A1-46070-274

SKF - VKUA 4547 A & VKPC 82208 CL - Batch of water pumps and universal joints Auction-ID: A1-46070-212

ABB Frequency Converter Auction-ID: A1-46070-333

Batch of galvanized steel brackets, clamps and mounting plates (453KG) Weight: 453KG net Auction-ID: A1-46070-295

SKF - Batch of car parts (including CV joints) 481KG Auction-ID: A1-46070-300

KBC - 6208DDNR, 619/8, 6302 - Batch of ball bearings 404KG Auction-ID: A1-46070-313