gravure 4 color used for sale

Allen Bradley Guard Master 450L-E4FL1800 - safety barrier Brand: Allen Bradley Guardmaster Product type: Light curtain Series: 450L-E Beam Resolution: 14mm Component Type: Transceiver Protection Type: Type 4 Standards/Approvals: TUV, IEC Protection height: 1.8m Maximum protective width: 9m Maximum supply voltage: 24V Minimum Scanning Distance: 0.5m Maximum Scanning Distance: 9m Height: 1.8m Length: 30mm Width: 30 mm Maximum response time: 20ms Connector Type: Screw

Transnova-RUF robot Flex Line RV-400 case packer & palletiser, packaging section with infeed conveyor, magazine, erecting/loading robot, carton closing station using self-adhesive tape at the bottom and top, carton discharge with labelling system (2 carton labels at a corner position of the carton), palletising with palletising conveyor (1-3), pallet lift and palletising robot (ALU-EURO pallet (1200 x 800 x 144 mm, loading height max. 1575 mm incl. pallet), max. 5 layers), electrical connection 230/400V/50Hz/3Ph, power consumption max. 10.7 kW, output up 0.65 cases/min or 2.9 pallets/hour

Control MITSUBISHI M 700 Bar Passage 37.5 mm 2 x 12-speed revolver with attached revolver Wkz. 2 x C-axis 2 x Y-axis Main/sub-spindle FMB Bar Loading Magazine turbo 3-36 Knoll Coolant Preparation KF 10 Chip conveyor Renishaw Probes Parts catcher Conveyor belt for precast elements Air filter 2 x Collet Chuck Tool holders and collets

Schnittgeschw. 12 - 750m/min 16 A plug Top towing eye Ideal Strip Welding Device Work Lamp Chip blow-off device Length 1 m Width 0.8 m Height 1.90 m

Nail Citoborma 480AB, - 400V, - Floor model, - 4 new drive belts

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 380 kg/h (depending on material and feeding rate), ABB Main drive 117 KW 380 V 50 H 3Ph (65% used in work), loading hopper, extruder with heaters and vents, fitted with a 105 mm Ø screw 40 L/D, n.1 vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer (200 mm Ø)complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, The line is offered either CHECKED or RECONDITIONED to various extents., capacity: 300-430 kg/h nominal

CONTROLS   CNC controls OKUMA OSP-P300MA WORKING RANGE -CUBIC-   X-axis travel: 560 mm   Y-axis travel: 560 mm   Z-axis travel: 625 mm SPINDLE / HEAD   spindle revolutions (max): 15000 /min X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 5000 /min   - drive power: 5.5 kW TOOL MAGAZINE   number of positions: 146 AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 2   Workpiece diameter max.: 600 mm   worpiece length max.: 900 mm   pallet length: 400 mm   pallet width: 400 mm   number of pallets: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS   chip conveyor: yes   coolant unit: yes   through spindle coolant attachment: yes   closed cabin: yes   European CE standards: yes

CNC circular saw Type: KKS 451 CNC Manufacturer: Kaltenbach Year: 2014 CNC control + touchscreen PROFICUT Saw blade diameter: 450 mm Motor power: 1.8 / 2.7 kW Selectable power: 4.0 or 5.5 kW Cutting speeds: 10/20 – 13/26 – 15/30 m/min Selectable regulation: 7–43 or 15–75 m/min Saw feed: 0–1000 mm/min Rapid return feed: 3500 mm/min Single material feed: 10–2000 mm Multiple feed up to 9999 mm Max. round material: 150 mm Max. square: 140 mm Max. flat material: 240 × 80 mm Angling range: ±60° Rotating range: 120° Tool type: HSS discs Table magazine for up to 6 meters of material Machine weight: 2500 kg Dimensions: 3300 × 1420 × 2100 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

Panel sizing saw, vertical Brand: Putsch Type: SVP 420 M New machine Description: The SVP 420 M is a vertical panel saw practical for cutting panels vertically and horizontally. The saw frame is completely welded and has an attachment grate for the workpieces, consisting of aluminum strips and plastic inserts. The automatic grate movement ensures that the saw blade does not hit the contact strips in the case of horizontal cuts. The lower workpiece supports consist of aluminum soles and plastic supports. For simple movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and saw carriage can be moved and adjusted by hand, the saw beam can be fixed at 5 vertical sawing positions. The comfortable entry and exit of the saw head is ensured by an ergonomically shaped handle. Standard features: - electrically driven, automatic shift gate ...

CONTROLS   conventional BASIC DESIGN   basic design: cross bed WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 1120 mm   Y-axis travel: 350 mm   Z-axis travel: 400 mm   distance spindle nose - table surface (max.): 420 mm TABLE   table surface (left-right): 1600 mm   table surface (front-back): 400 mm   workpiece load (max): 1500 kg SPINDLE / HEAD   spindle type: tilting head   - mode of operation: manual   - mode of operation: manual   spindle revolutions (max): 28 /min   number of gears: 1400   tool fixture: ISO SK 40 AXIS DRIVES   feed velocity (min): 16 mm/min   feed velocity (max): 800 mm/min ELECTRICAL SPECIFICATIONS   total power consumption: 14.5 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 2700 mm   space requirements -front/back-: 2350 mm   total height: 2150 mm   total w ...

CONTROLS   NC controls SIEMENS S7 TECHNICAL SPECIFICATION   max. diameter of saw blade: 460 mm   cutting capacity round: 146 mm   cutting capacity square: 138 mm   mitre cutting: no   .. oblong: 250 mm   .. .. x: 100 mm   .. to: 220 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 1950 mm   total height: 2000 mm   total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

CONTROLS   electronic controls TECHNICAL SPECIFICATION   max. diameter of saw blade: 260 mm   cutting capacity round: 260 mm   cutting capacity square: 260 mm   mitre cutting: yes   cutting range     round: 260 mm   .. oblong: 400 mm TECHNICAL SPECIFICATION   max. cutting height: 260 mm   sawband length: 4310 mm   sawband width: 0.9 mm   cutting speed min.: 17 m/min   cutting speed max.: 90 m/min   power of band drive: 2.2 kW ELECTRICAL SPECIFICATIONS   total power consumption: 3.2 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2400 mm   space requirements -front/back-: 2100 mm   total height: 2000 mm   total weight approx.: 1220 kg Machine overhauled, cleaned, and all oils replaced! The machine is fully hydraulically equipped, with a cooling water tank and pump, and a chip container ...

Reference Num.: 4284 Brand: Duplo Type: System 4000 Available: directly Status: In production Location: Deutschland Equipment: - Broschürenfinisher mit Frontschnitt - 10 Stationen - Hefteinheit - DUPLO Fronttrimmer DBM-400LS - Falzeinheit

A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible.

Band Saw HOLZKRAFT HBS 433- Exhibition Machine - Saw blade guide at the top, saw blade guide at the bottom, quick-clamping device via eccentric lever---------- Technical data ----------rollers: 430 mm, max. cutting height: 270 mm, max. cutting width with stop: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 , motor 400 V: 1.5 kW, extraction nozzle: 2 x 120 mm, cutting speed: 900 / 450 m/min., Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130

Table milling machine HOLZKRAFT t 45c LLWith table extension right and left, as well as pull-out workpiece support---------- Technical data ----------table size: 1,945 x 695 mm, max. spindle protrusion over table: 130 mm, useful length milling spindle: 100 mm, max. retractable milling cutter: 180 mm, speeds: 3,500 / 7,000 / 10,000 rpm, motor 400 V: 6.6 hp / 5.0 kW, suction nozzle : 2 x 120 mm- special price -- new exhibition machine -

Litz LU 400Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpmMovement X/Y/Z : 400/350/350 mm____________Description:Spindle:Technology:DirectdriveSpeed:12.000 rpmPower (max.):13 kWTorque (max.):95 NmTaper:SK40NC-Swivelroundtable:B-Axis:-50°/+110°C-Axis:360°Clampin gsurface:ø450 mmTableloading (max.):200 kgIn general:Toolmagazine:48 StationsRapid travers in X/Y/Z:48 m/minEquipment/Accessory:Positionsensor:Direct Scales in X/Y/ZChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with filter and High-pressure, 30 barWorkpiecemeasurement:Touch probe, Heidenhain TS740Toolmeasurement:Laser, Renishaw NC4 TXSetup operations:Electronic HandwheelFurther Equipment:SpindlechillerFurther Accessory:Misc. used Toolholder

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

AddUP AddUP BeAM Modulo 400Year of manuf. : 2022 Control : Siemens SINUMERIK ONE NCU 1750 ____________Description:In general:System:Industrial DED systemSafety:Vacuum lock and inert gas purgingYear of manufacture:2022Weight:approx. 7,500 kgGeometry:Number of axes:5-axis kinematics with automatic tool changerTravel ranges (x/y/z):650×400×400 mmTable diameter:400 mmTable load capacity (max.):100 kgMeasurement:Renishaw probeLasers & Optics:Laser:Dual IPG laserFine machining:500 W (IPG fiber laser, 200 µm fiber)High build-up rate:2000 W (2 kW) (IPG fiber laser, 600 µm fiber)Optics:Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro claddingControl unit:Control:SINUMERIK ONE NCU 1750 (SW 6.14) on a 24 SIMATIC touch panelProcess preparation:Via Siemens NX CAM and edge computing (IPC 427e)Monitoring:Live process control via HMI Display Manager and sensors for the chamb ...

internal diameter: 20-35 mm grinding depth: 200 mm swing diameter: mm weight of the machine ca.: 4 t total power requirement: kW dimensions of the machine ca.: m grinding diameter 20-35mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 28 mm : 28 mm : 22 mm : 26 mm : 23 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

turning diameter: 400 mm turning length: 635 mm control: Heidenhain Eltropilot greates pass round over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm drive of main spindle: 21 kW max. torque on the spindle: 240 Nm main spindle speeds:: 25-5.000 turning speed range - C-axis: 100 U/min workpiece system 12-station turret head: feed power in the axis x + z: 3,5 / 7 N rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min coolant device with chip conveyor: total power requirement: 44 kva weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lippert belt conveyor GF 5030-570-450 RA2496 Technical data: Conveyor length (NL): 5030 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5030 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

SANDRETTO Series 8 430/110 Clamping Force: 110 T Year : 1998 Distance Between tie bar: 415 x 415 mm Platen Dimensions: 610 x 610 mm Mold Thickness (min/max): 100 - 460 mm Opening Stroke: 410 mm Injection Volume: 353 cm³ Injection Pressure: 1215 bar Screw Diameter: 50 mm Weight: 5700 kg Dimensions: 5.67 x 2.03 x 1.32 m SEF 100

Lippert belt conveyor GF 5300-570-450 RA2495 Technical data: Conveyor length (NL): 5300 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5300 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Key data: 4850 kN, 80 mm

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Clamping force: 485 T / 4850 kN Distance between tie bar: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max) : 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Injection screw diameter: 80 mm L/D ratio: 20 Options: 4 hydraulic cores 1 air blow gun 2 8-way water boxes Dimensions: 8.71 x 2.65 x 2.14 m Weight: 21,500 kg

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm

Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder

Key data: 4040 mm

used Schechtl manual bending machine, with roller shears Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 4040 mm Sheet thickness steel: 0.80 mm Sheet thickness aluminium: 1.25 mm Sheet thickness front: 0.50 mm without backgauge Colour: light grey Dimensions: 5013 x 750 x 1300 mm Machine weight: 2230 kg Roller shears: HA 400 RSL with cutter for cutting to length Opening width: 120 mm with underbeam adjustment without backgauge # Machine number HA 2774

Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4365 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

This 5-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details.

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...

bore capacity in steel (diameter): 40 mm arm length: 1050 mm workpiece height max.: - mm turning speeds: 15 - 2800 U/min feed range: 0,075 - 0,45 mm/min dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

Key data: 4000 KW, 11000 V

Diesel Generator Niigata 4 MWe / 50 Hz HFO Never Installed Never used medium speed Niigata HFO / Diesel fuel generator with Nishibhiba made air cooled 11 kV synchronous alternator with auxiliaries. All equipment was manufactured in year 2017 and they were never installed. Engine can run with normal diesel fuel of 180 cSt heavy fuel oil. Engine has two intercooled turbo chargers, on built lubrication fuel filter and engine driven cooling and lubrication pumps. Auxiliaries includes control panel, fuel booster unit for 180 cSt HFO, fuel oil filter, tools and spares. Delivery don’t include synchronization module and neither 11 kV breaker switch. Engine and alternator will be bolted on to a concrete foundation. Techncial characteristics Manufacturer Niigata, Japan Engine type 12V28 AHX Manufacturing year 2017 Operating hours since new Zero (only FAT) Electric ouput 4000 kWe ...

Key data: 400 mm

working condiiton

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 430 mm -Load capacity: 15 tons distributed load -Number: 14 axle stands available -Price: per piece -Dimensions: 410/1200/H430 mm -Weight: 60 kg

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with adjustable feet -Length: 7990 mm -Width: 2480 mm -Height: 350 mm -Sheet thickness: 30 mm -Quantity: 2 mounting plates available -Price: per piece -Transport dimensions: 7990/2480/H350 mm / 1200/800/1000 mm/piece -Weight: 9500 kg/piece

CONTROLS    PNEUTRONIC CYBELEC STEUERUNG PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: no   feedstock transport direction: left to right SLIDE   total force (nominal): 400 to   stroke: 230 mm   stroke rate (max.): 35 /min SLIDE (HYDR. PRESS)   approximation velocity max.: 120 mm/s   working velocity min.: 5 mm/s   working velocity max.: 50 mm/s   return velocity max.: 135 mm/s COUNTER RAM   nominal force: 100 to   stroke: 40 mm V-RING   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1050 mm   lower table (front-back): 800 mm   upper table (left-right): 800 mm   upper table (front-back): 800 mm   shut height max.: 410 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 350 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   fee ...

Clamping force: 450t, opening stroke: 950mm, tie bar spacing X/Y: 800mm/970mm, operating pressure: 210bar, weight: approx. 20400kg, control system: Unilog B4. An on-site inspection is possible.

This 3-axis Mazak VCS 430A was manufactured in 2014. It features a maximum spindle speed of 12,000 rpm and a table size of 900 x 430 mm. The machine is equipped with a Mazatrol Smart CNC and has a tool capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A vertical machining centre we have for sale. Contact us for further details.

2G agenitor 406 CHP container, used, on behalf of a customer, with unit certificate Year of Make: 2013 Running Time: Approx. 30000 Bh Power: 250 kW electr. Delivery available for an extra charge

This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details.

Hänel Rotomat 400 Paternoster The Hänel Rotomat 400 is a vertical carousel (paternoster) that works according to the principle of "goods to the user" and is used both for industrial storage and as an office lift for archiving. The system makes optimal use of the available room height to maximize storage space in a minimum footprint. Areas of application The Hänel Rotomat 400 is used across all industries: Industry: For the storage of tools, measuring instruments, electronic components and small parts. Office & Administration: As an automatic archiving system for hanging files or file folders. Medical: For the sterile storage of surgical instruments. Overall dimension L: 260 cm Overall dimension B: 130 cm Overall dimensions H: 285 cm Permissible. Shelf load: 150 kg Connected loads: 3~ N+PE 400V / 50HZ/ 5.5 KW Year: 2004 Dismantling and removal by buyers Dism ...

Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - / Contact us at -

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.