used
Key data: 250 mm
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
Year: 2016 - technically efficient, ready to work – after full service - motor: 3 kW/400V - milling diameter: 250 mm - milling width: 305 mm - material stop can be rotated in both directions up to 20° - vertical and horizontal pneumatic profile clamping - compressed air preparation station - cooling and lubrication system
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer
Milling cutter diameter 250 mm Max. milling depth: 80 mm Milling width: 330 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting
Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame
Pull saw on substructure with mobile device (support table / wooden system) Further dates will follow. The sale is carried out on behalf of the owner from the current location in the "current state"
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg
Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material tensioners Minimum quantity spraying device Powerful 5 KW motor
Graul zs170N with 3 KW motor, wheel adjustment tilt front, or rear Machine stand, oil brake, printer, digital angle display horizontal and/or vertical
Graule ZS170N 3D - Tilt and pan controlled with Tigerdrive Manufacturer: Graule Type: ZS170N 3D Mach. No 2014/78/27 Year of construction 2014 Graule ZS170N Motor: 3 kW Saw blade: ø420 mm Axle: ø40 mm Saw height: 170mm Angle adjustment: 45 - 90 - 25° (controlled) Tilt: 0 to 45° (controlled) Sawing line: 450mm at 90°310mm at 45° rotation Saw blade: ø4204048 WZ Neg. (used) Machine stand: Included
Length stop with roller conveyor Length: 3 meters Handwheel adjustment Measuring tape with magnifying glass
Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional
- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides
Cutting and miter saw • Saw blade diameter: 420 mm • Saw blade holder: 40 mm • Cutting length: 410 mm (at 90°) • Cutting height: 170 mm (at 90°) • Machine can be swivelled on both sides via hand crank (from 90° to left by 45° and from 90° to right by 30° to max. 60°) • HM circular saw blade for wood (420 x 3.4/2.4 x 40 mm 48 WZ neg) • stable cast iron construction • Precise ball bush guidance of the tool slide on hardened and ground steel shafts • Saw feed manually • Miter range horizontal: 45° - 90° - 25° • Miter range vertical: 90° to 45° (left) • re-adjustable fixed stops • Lower saw blade protection can be connected to a suction system (diameter suction nozzle = 100 mm) • incl. machine stand for type 170 N • Weight: 120 kg Engine data: • Power: 3 kW • Speed: 2710 rpm • Voltage: 400/230 V • Rated current: 6.4 ...
Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional
Graule ZS 170NF Cutting and miter circular saws Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 430 mm (at 90°) Cutting height 170 mm (at 90°) Miter range: horizontal 45°-90°-25° Miter range: vertical 90°-45° (left) Saw blade s. 420 mm Suction nozzle 100 mm Weight 120 kg
Graule ZS 170N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3500 RPM Cutting length 430 mm (at 90 °) Cutting height 170 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 420 mm Dust nozzle 100 mm Weight 120 kg
Graule ZS 135N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3800 RPM Cutting length 440 mm (at 90 °) Cutting height 135 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 350 mm Dust nozzle 100 mm Weight 100 kg
Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg
