gr used for sale

Häner Demolition Grab HAGx22.28 black satin matt New for mini excavators from 20 - 26 t Opening width: 1,930 mm Tray width: 1000 mm Overall height open with drive: 1400 mm Max. operating pressure on/off: 300 bar Net weight with swivel function: 1480 kg without pick-up Number of hydraulic motors: 2 Min. oil volume on/off: 90 l/min Min. oil volume turn: 40 l/min Hose Close/Open Size: 1\" Swivel Hose Size: 1/2\" Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-46656-255

4 cylinder diesel engine, 4 wd driven, new blades fitted last season Auction-ID: A1-40138-249

Forestry Grab HWG 1000.30 Excavator class: 2.5 - 4.0 tons. Opening width: 1020 mm Lifting capacity: 1500 kg max. Weight with rotator, without mount: 96 kg Shell width: 310 mm Max. operating pressure on/off: 200 bar min. oil volume on/off: 15 l/minute Min. oil volume rotate: 20 l/minute Height open: 900 mm (with rotator) min. Ø: 80 mm Rotator: GR 30 Hose connection 10L (turn/grip) Turning/gripping at least 15-25 L/min. \"Not suitable for logging work and permanent cultivation\" Auction-ID: A1-46656-1425

Including transport yoke, photos are example, size per roll approximately 134x8000cm Auction-ID: A1-40112-58

with GR30 rotator black satin matt for mini excavators from 1 - 3 t Opening width: 770 mm Tray width: 350 mm Overall height open without drive: 463 mm Clamping force: 4.5 kN at 200 bar Max. operating pressure on/off: 200 bar Rigid weight: 62 kg without mount Net weight with rotator: 95 kg without mount Min. oil volume on/off: 15 l/min Min. oil volume rotate: 10 l/min Size of hoses close/open: 10L Turning Hoses Size: 10L Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-46656-190

Including transport yoke, photos are example, size per roll approximately 134x8000cm Auction-ID: A1-40112-57

Häner Sorting Grapple HAGx8.12 black satin matt for mini excavators from 8 - 12 t Opening width: 1,502 mm Shell width: 605 mm Overall height open without drive: 833 mm Clamping force: 26.2 kN at 300 bar Max. operating pressure on/off: 300 bar Net weight with swivel function: 530 kg without pick-up Number of hydraulic motors: 2 Min. oil volume on/off: 25 l/min Min. oil volume turning: 15 l/min Size Hoses Close/Open: 1/2\" Swivel Hose Size: 1/2\" Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-46656-240

Forestry Grapple HWG 1000 Rigid Excavator class: 2.5 - 4.0 tons. Opening width: 1020 mm Lifting capacity: 1500 kg max. Weight without motor: 74 kg Shell width: 310 mm Max. operating pressure on/off: 200 bar min. oil volume on/off: 15 l/minute Height open: 630 mm min. Ø: 80 mm \"Not suitable for logging work and permanent cultivation\" Auction-ID: A1-46656-1420

Häner sorting grapples HSG4000 black satin matt New for mini excavators from 40 - 60 t Opening width: 2800 mm Shell width: 1400 mm Overall height open with drive: 1645 mm Max. operating pressure on/off: 300 bar Net weight with swivel function: 3704 kg without pick-up Number of hydraulic motors: 2 Min. oil volume on/off: 100 - 130 l/min Min. oil volume turn: 40 - 60 l/min Hose Close/Open Size: 1\" Swivel Hose Size: 1/2\" Scope of delivery: - Operating instructions - Spare parts list - CE declaration of conformity Auction-ID: A1-46656-1510

3 stages, 380 V 50 Hz Connected load: 10.5 kVA Rated current: 16 A Auction-ID: A7-46802-50

This 3-axis EASTAR ESG-1640ASD II surface grinding machine was manufactured in 2008. It features a substantial work plane of 400 x 1000 mm, ideal for various grinding tasks. If you are looking to get high-quality grinding capabilities, consider the EASTAR ESG-1640ASD II machine we have for sale. Contact us for more information.

AWG 28 Style 1007 cable GREY color 700 mt Auction-ID: A1-46617-29

AWG 28 Style 1007 cable GREEN color 2.500 mt Auction-ID: A1-46617-11

AWG 28 Style 1007 cable color YELLOW/ GREEN 1400 mt Auction-ID: A1-46617-45

external diameter: 420 mm internal diameter: 100 mm width: 5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.33 m, Overall length= 1.28 m, Overall width= 0.8 m, Net weight= 418 kg,

Height=1.34 m, Overall length= 0.83 m, Overall width= 1.1 m, Net weight= 240 kg,

Height=1.45 m, Overall length= 0.9 m, Overall width= 0.75 m, Net weight= 229 kg,

Condition: used,Other: Manufacturer: Vakumix Type: DHOLF GR3 Year of construction: 2003 Drive power: 31 kW Maximum pressure product: 2 bar (overpressure) Maximum temperature product: 133 C Areas of application: Mixing / homogenizing and pumping over of emulsions and pastes Documentation available,Manufacturer: VAKUMIX,Total height: 920,Total length: 1,500,Total width: 600

Automatic double sanding system for battery boxes, each identical to the Kuka robot, wood and parts sanding device, housing, with roller infeed and outfeed, year of manufacture 2023

The machine is in good technical condition, testing is possible by prior arrangement.

Packing table metal wood white worktop grey approx. 180x60x85/150cm (WxDxH), paper roll holder, 3 drops for waste separation system

Hanging file trolley steel grey 2-speed approx. 80x50x60cm (WxDxH)

Hinged door steel cabinet light grey, approx. 90x190h cm, without contents

Hinged door steel cabinet light grey, approx. 90x190h cm, without contents

Magazine rack rollable grey approx. 100x45x192h cm

Key box metal grey, approx. 30x45h cm, with letterbox metal white, 2 keys, approx. 42x12x32h cm

Function: This machine is designed for precise cutting and mitre cuts and has a swivel and tilting sawing unit, including accessories such as spare saw blades Auction-ID: A1-46862-29

Belt sander from MAFAC ; TYPE K 100 BJ 1979 and a double sander from BOSCH, incl. replacement sanding belts Auction-ID: A1-46862-15

Excellent condition - Fully operational - Loading / Transport possible! Grinding aggregate with grinding wheel diameter 150 mm brush disc diameter 150 mm main motor 1.6 kW grinding and brush speed 600-1500 RPM Mobile Chassis Connection 400 Volt

Excellent condition - Fully operational - Loading / Transport possible! Table size 800 x 400 mm Table load capacity 700 kg Grinding wheel size ø355 / 305 x 38 x ø 127 Magnetic plate dimensions 800 x 400 mm Travel x: 950 mm, y: 440 mm Max. workpiece weight 47.5~547.5kg Feed rate 0 - 1500 rpm Spindle motor power 20 HP with magnetic chuck

Impact drill - screwdriver - angle grinder - impact wrench - including 2 batteries and, battery charger - handles impact drill and angle grinder - safety cover angle grinder. This in 2 suitcases. Auction-ID: A1-40256-81

Chicken grill with base directly from restaurant. Stainless steel. Not checked for operation. Viewing by appointment. Auction-ID: A1-40256-113

(1x) on console, various makes and models. Auction-ID: A1-45979-148

With registration papers, Belgian papers, viewing by appointment only Auction-ID: A1-40256-4

Combined planetary mixer/meat grinder. Includes wire whisk, flat mixer and mixing hook. Viewing by appointment. Auction-ID: A1-40256-117

Equipment / Accessories - Micro adjustment on the tailstock - Internal grinding device for 80mm dia. Max. - Swivelling dressing device for internal grinding - Dial gauge stop for table swivel - Universal paper belt filter - Internal grinding spindle UJ70 Equipment / Accessories - Micro adjustment on the tailstock - Internal grinding device for 80mm dia. Max. - Swivelling dressing device for internal grinding - Dial gauge stop for table swivel - Universal paper belt filter - Internal grinding spindle UJ70 - 1 double-jaw bezel dia. 5-80 mm - 1 three-jaw bezel, hinged, dia. 3-120 mm Auction-ID: A7-46758-1

Hobart CE 100 Planetary mixer / meat grinder including accessories. Viewing by appointment. Auction-ID: A1-40256-120

Model: O&K F156A Type: Motor grader Operating weight: 15,300 kg Engine: Deutz BF6M1013E, 6-cyl turbo diesel Engine power: approx. 150 kW Drive: 6×6 all-wheel Transmission: ZF powershift, 6 forward / 3 reverse speeds Year: 1998 Blade width: approx. 3.6 m Blade height: approx. 0.8 m Turning radius: approx. 7.3 m Articulation angle: ±20° Hydraulic system: load-sensing, multi-function control Cabin: enclosed, ROPS, heater, joystick control Included equipment: front dozer blade, rear ripper, central moldboard Brakes: multi-disc, oil-cooled, hydraulic Compliance: CE Power supply: Diesel Manufacturer: O&K (Orenstein & Koppel) Baumaschinen GmbH, Germany Approx. own mass: 15.3 t Heavy-duty motor grader suitable for road construction, leveling and maintenance operations. Auction-ID: A7-45990-51

Large Multi media screen, Virtual cockpit, air conditioning, navigation, bluetooth, alloy wheels, keyless entry, reversing camera, LED lighting, cruise control, electric mirrors, wireless phone charger, recent maintenance, Viewing by appointment Auction-ID: A1-40256-12

Combined planetary mixer/meat grinder. Includes wire whisk, flat mixer and mixing hook. Viewing by appointment. Auction-ID: A1-40256-79

Planetary mixer/meat grinder including wire whisk, flat mixer and other accessories. Viewing by appointment. Auction-ID: A1-40256-54

4 piece cordless tool set; screwdriver, impact wrench, drill and grinder. Includes 2 batteries, charger and various accessories in case. Cordless power tools set Auction-ID: A1-40256-45

Machine type: Motor grader Manufacturer: Caterpillar (CAT) Model: 14G (visible marking) Engine: Diesel engine Cab: Enclosed operator cab Drive: 6x4 configuration (typical for model) Blade: Central grader blade Tyres: Pneumatic tyres, heavy-duty profile Own weight: approx. 20,000 kg Auction-ID: A7-45990-4

- screwdriver - Drilling machine - Impact wrench - angle grinder 1x Li-ion Battery Charger 1x Li-ion Battery 20V 2Ah 1x Li-ion Battery 20V 4Ah 5x Cutting disc 1x Drill set 9 Pcs 1x 1/4\" 65mm ADA 1x 1/2\"73mm ADA 1x Key Chuck Angle Grinder unused Auction-ID: A1-40256-119

This 3-axis GHIRINGHELLI M300SP610 CNC3A was manufactured in 1993. It features a grinding wheel diameter of 610 mm and a maximum wheel speed of 35 m/s. The machine is equipped with an automatic loading and unloading system, enhancing productivity. If you are looking to get high-quality centerless grinding capabilities, consider the GHIRINGHELLI M300SP610 CNC3A machine we have for sale. Contact us for further details.

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING   grinding length: 1600 mm   grinding width: 900 mm   workpiece height (max) with largest wheel: 600 mm   number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING)   table surface (left-right): 1600 mm   table surface (front-back): 800 mm SPINDLESTOCK GRINDING SPINDLE   X-axis travel: 1700 mm   spindle revolutions (max): 1000 /min GRINDING TOOL   type of grinding tool: wheel   diameter (max): 500 mm   borehole: diameter: 203.2 mm   width: 100 mm ELECTRICAL SPECIFICATIONS   total power consumption: 30 kW   mains voltage: 400 V   mains frequency: 50 Hz

WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 515 mm   workpiece weight between centers (max): 500 kg   workpiece weight flying (max): 120 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 515 mm   grinding length: 1500 mm TABLE -CYLINDRICAL GRINDING-   tilting range (B-direction) min: 8.3 °   rotating range B-axis up to: -4 °   longitudinal travel: 1680 mm WORKPIECE SPINDLESTOCK   spindle revolutions (min): 14 /min   spindle revolutions (max): 114 /min   number of gears: 2   drive power: 1.5 kW   tool fixture: MK 6 TAILSTOCK   sleeve stroke: 40 mm   taper: MK 5 SPINDLESTOCK GRINDING SPINDLE   tilting range (B-direction) min: -10 °   rotating range B-axis up to: 10 °   drive power: 15 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 630 mm   borehole: diameter: 203.2 mm   width: 125 mm DIMENSIONS ...

A surface grinding machine is offered. Grinding area X/Y/Z: 500mm/200mm/350mm, table clamping surface X/Y: 500mm/200mm, grinding wheel diameter: 225mm, speed: 2800rpm, control system: manual. Equipped with magnetic clamping plate, dressing device, coolant system. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/1800mm. Inspection possible by arrangement.

A surface and profile grinding machine is offered. Grinding area X/Y/Z: 600mm/250mm/470mm, table clamping surface X/Y: 600mm/200mm, grinding wheel diameter: 250mm, speed range: 1000rpm - 4500rpm, control system: CNC. Equipped with magnetic clamping plate, dressing unit, coolant system. Weight: approx. 3200kg, overall dimensions X/Y/Z: approx. 2600mm/2100mm/2400mm. Inspection possible by arrangement.