132,109 used machines on RESALE, but how to find them? Machine Search
Yanmar SV60-A excavator, Technical specifications:, - Year of construction: 2020, - Transport weight: 5,560 kg, - Operating weight: 5,635 kg, - Rubber track width: 400 mm, - Digging depth: 3.91 m, - Engine power: 32.6 kW, - Displacement: 1,995 l
: 200 mm mechanical: ja weight: 1,5 t : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm
Hemburg U2.H Motorpower: 950 W Tension needed: 3 x 380 V
Manufacturer:STUDER Model: S33_1045 Year of Manufacture: 2022 Operating Hours : approx. 2500h Included Equipment: DGS filter system. Tip length : 400mm with 2 grinding wheels Find more here - / Contact us at -
Max. work-piece diameter: 254 mm Max. distance between centers: 1066 mm Max. length of grinding: 1041 mm Max. capacity of collet chuck: 38 mm Dimensions of standard grinding wheel: 408x25x205 mm Limits of grinding head turning: 45 degrees Centre tapers: Sea #4 Thread pitch: 0.42 – 305 mm Max. pitch correction: 0,1 mm on 100 mm of length Adjustable backing-off: 0-5mm Number of rotation speeds of grinding head: 20 Range of speeds of workpiece slide: 1/3 – 60 rpm Speeds on back-run: 25.4; 80 rpm or working speed Work-piece slide motor capacity: 0.75 HP Grinding head motor capacity: 3.5/1.25 HP Max. obliquity: 1:12 Width limits of grinding wheel: 9.5–75 mm Range of grinding wheel speeds: 850–1540 rpm Internal diameters processable: 19–228 mm Max. diameter of hobs: 178 mm Max. diameter of thread chasers: 254 mm Coolant tank capacity: 136 liters Dimensions: -L ...
Key data: 600 mm, 600 mm
Manufacturer: ELB-SCHLIFF Model: SWR 50 T Refurbished: 2008 Shipping time: immediately Grinding area: Ø 600 X 300 mm Grinding wheels: max. Ø 400 X 100 x 127 mm Spindle cone: 60 mm Dimensions set-up: approx. 2800 X 2800 X 2300 mm L/W/H Total weight: approx. 5000 kg Control: Siemens PLC
10 station grading line Mettler Toledo advanced check weigher Weight range 50g to 8000g Weigh table size - 300mm wide x 630mm long Automated box handling system Complete with loaders Critical spares Overall dimensions 8500mm long x 1400mm wide
gebr. Long belt sanding machine incl. brush unit LONG FENCE LZG-S YOC 1995 CE marking available Connected load: 5.0 kW (11.6 A) Motor power: 3.2 / 4.8 kW 2 belt speeds: 700 + 1,400 rpm Table size: 100 x 250 cm Belt length: 6,800 mm Belt width: 150 mm electr. Table height adjustment Table height adjustment range:350 mm Large column projection depth: 1,000 mm (single-sided) Column projection height: 350 mm Selector switch for left/right rotation integr. Lighting Drawer grinding device with removable table insert pneumatic belt cleaning incl. 2 grinding pads: 1x standard + 1x roller sanding shoe Brush unit LANGZAUNER LZB Motor power: 1.3 kW no retail sale! Extraction connection: 180 mm Dimensions (approx. information): L 373 cm W 140 cm H 161 cm Weight: approx. 700 kg Machine in good used condition, as little used.
Surface Grinding Machine Aba FFK High-quality, hand-operated surface grinding machine Magnet size: 250 x 150 mm Dressing device on top of the spindle Maximum stroke in X direction: 390 mm Maximum stroke in Y-direction 180mm Height from magnet to spindle center: 395 mm Large Vernier Rings Includes 5 flanges with grinding wheels Dot diamond for magnet A dust extraction system is also available.
Item condition: in working order Availability: immediately Tub: up to 100 kg grease Pumping capacity approx.: 23l/min Coarse filter capacity: 2l Fine filter filter discharge: < 20 μ Grease filter also for workspaces with less space. The FILTER works in a continuous process and sucks up the residues like a vacuum cleaner, filters them out in the proven 2-chamber system and directs the clean grease back into the deep fryer or another container. And all this at the touch of a button!
Stock# U2452 Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.
Swivelling grinding unit up to 45 Work table 960 x 350 mm Table height adjustment 230 mm Belt length 3000 mm Belt width 200 mm Engine 3 kw 4 hp Weight 450 kg
2 engines Motorized height adjustment Table length 300 cm without extraction fan Space requirement length 430 cm
Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic
Work table, mm 750 x 300 Table height adjustment, mm 200 Strap length, mm 2600 Belt width, mm 150 Sanding belt rear panel, mm 850 x 200 Belt speed, m/s 20 Oscillation stroke, mm 20 Oscillatory motor, kW (hp) 0.25 (0.34) Speed, min-1 2840 Space bed, mm 1600 x 850 x 1350 Engine power, kW (hp) 3.0 (4.0) Weight, kg 180
Wide belt grinding machine with 3 rollers and 3 belts Grinding width 1300 mm Year of manufacture 2001 Power 33 kw 2 main engines Amper 69
Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration Grinding bug selection from the control panel Sanding shoe selection from the control panel Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table Entrance and exit table extensions Moving carpet centering
Grinding width 950 mm Steel roller for calibration 1 belt combi unit design Ce Version V 400/50 Entrance and exit table extensions Moving carpet centering Automatic electronic operation control
The bran finisher increases the flour yield during the grinding process by separating the flour from the bran. It is used for soft wheat, durum wheat and rye. It has a production capacity of up to 1.8 tons per hour, or 3.6 tons per hour if you use the double machine.
Size 3,620 x 1,600 mm Thickness of the plate 245 mm with substructure - working height 780 mm Longitudinal grooves 34 mm Cross grooves 18 mm Weight approx. 5,000 kg PRICE ON REQUEST!
Table dimensions X/Y: 900mm/300mm, max. grinding length: 900mm, max. grinding width: 350mm, max. table to spindle center distance: 575mm, max. table load: 670kg, max. table longitudinal movement/cross movement: 859mm/300mm, grinding spindle speed: 2800rpm, grinding wheel outer diameter min./max.: 400mm/165mm, bore diameter for 400mm: 127mm. Machine dimensions X/Y: approx. 1100mm/1100mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.
Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.
Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible.
centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.
Key data: 400 mm, 150 mm
Year of manufacture 1983 Grinding length 400 mm Grinding width 150 mm Installation height 400 mm Table load 75 kg All feeds are infinitely variable Drive power 1.5 kw Automatic delivery Magnetic Plate 400 x 150 mm Puller Wet grinding device Machine is in good condition
A surface grinding machine ELB-Schliff with position display is available. Magnetic chuck dimensions X/Y: 900mm/450mm, grinding length: 900mm, grinding width: 450mm. Documentation available. An on-site inspection is possible.
Largest grinding length 1200 mm Longest grinding length with table dresser 1000 mm Largest grinding width 600 mm Grinding height (table bottom edge grinding wheel) 550 mm Table load with magnetic pallet 975 kg Table load without magnetic plate 1200 kg Table speed 1 - 40 m/min Grinding spindle Motor spindle 11 KW Grinding wheel 406 x 152.4 x 100 mm Speed 1400 rpm Longitudinal axis (z-axis) Rapid traverse 5 m/min Adjustable feed rate 1 - 50 mm Infinitely adjustable feed 0 - 2000 mm/min smallest infeed 0.001 mm Perpendicular axis (y-axis) Rapid traverse 1.5 m/min smallest infeed 0.001 mm Space requirement approx. 4450 x 2935 x 2540 mm Total weight approx. 6700 kg Equipment: - Electropermanent magnetic clamping plate 1000 x 500 mm incl. electron. Control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l - fl ...
Complete line for mixing/granulating, sieving and drying/pellet coating of powder, consisting of Glatt VG PRO 200 mixing granulator - Gross volume 209 L - Usable volume 60-160 L, 36-96 kg at a density of 0.6 kg/dm3 - Container pressure shock resistance 12 bar - Mixing blade drive 15 kW, 10-200 rpm - Chopper drive 5.5 kW, 3,000 rpm - Protection class IP65 - Mixer with explosion protection EX II 3G (Zone 2), motors EEX, control cabinet NON EX - Product-contact seals in elastomer - Product-contact parts in AISI 318LN/1.4462, AISI 316L/1.4435, AISI 316L/1.4404 - Powder vacuum feed, feed pipe DN 50 - Pneumatic discharge valve - Liquid feed via spray system with peristaltic pump - WIP via rotating cleaning nozzles with WIP rack - Qualification support package (DQ/IQ) - GlattView 19 operation panel Glatt GSE PRO 200 rotary sieve - Capacity 100-1,500 kg/h - Rotor ...
CNC Ball Valve Grinding Machine Saporiti PV 500 Year of construction 2014 Siemens Sinumerik 840D Ball/sphere diameter: max. 500 mm Travels: X-axis 510 mm Z-axis 950 mm Y-axis +/- 1.5 mm Workpiece diameter x length: max. Ø 600 x 1,100 mm Workpiece weight: max. 1,000 kg Headstock speed: max. 200 rpm. Grinding wheels speed: max. 6,000 rpm. Water filter: 2,000 l Machine dimensions: L x W x H 3,300 x 2,500 x 3,000 mm Required footprint: L x W x H 7,700 x 6,000 x 3,100 mm Machine weight: approx. 15,000 kg Accessories: RENISHAW measuring system with Saporiti-specific software for easy centering of the tool to the ball A Saporiti PV-1000 from 2014 is also available. Condition: Is said to be excellent Offer number V-7140
CNC Ball Valve Grinding Machine Saporiti PV 1000 Year of construction 2014 Siemens Sinumerik 840D Ball/sphere diameter: max. 1,100 mm Travels: X-axis 1,150 mm Z-axis 1,350 mm Y Axis +/- 2 mm Workpiece diameter x length: max. Ø 700 x 1,100 mm Workpiece weight: : max. 6,000 kg Headstock speed: max. 200 rpm Grinding wheels speed: max. 1,200 rpm Water filter: 3,000 l Machine dimensions: L x W x H 8,000 x 4,100 x 3,500 mm Required footprint: L x W x H 9,100 x 8,200 x 3,600 mm Machine weight: approx. 36,000 kg Accessories: RENISHAW measuring system with Saporiti-specific software for easy centering of the tool to the ball Hydraulic system Coolant coolers Engine Radiator Coolant filter A Saporiti PV-500 from 2014 is also available. Condition: Is said to be excellent. Offer numb ...
The Trepko XPG 40 model is a Forming, Filling and wrapping machine for Aluminium foil or Parchment paper, this can be used to fill various products such as Butter, Margarine, Lard, Etc. The machine was fully refurbished in 2017 and it was never put in production now it’s with us in stock, we have made the full check over and is in perfect working order. The line consists also a Cintex Metal detector out feed conveyor ., Machine: Trepko XPG 40 , Capacity: up to 80 packets/min , Pack size: 100-300 grams, Dimensions: 100mm x 75mm x 35mm (250grams ) , Product: Butter, margarine, etc., Wrap material: Aluminium foil or parchment paper in reels, Product Feed: Hopper with Screws , Photocell: Foil Centering unit , Weight: 2.000 kg (gross), Machine Dimensions: Approx. 200 x 150 x 200 cm (l x w x h), Electricity: 2,2 kW
Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500
A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible.
Long belt sanding machine Johannsen Type T8E Machine No. 14185 Built in 1979 Sanding belt dimensions 7100 mm x 150 mm Table size 2500 mm x 950 mm Upper sanding belt cover Motor power 4 kW Sanding belt 2 speeds left and right rotation Clearance under belt maximum 470 mm Right offset 300 mm Extraction connection diameter 160 mm Dimensions 3750 mm x 1350 mm x H 1400 mm Weight approx. 850 kg
Belt loader, coolant filter, wheel changing equipment, grinding and drag rules and grub screws, Grinding wheel dimensions (od x id x width): 610 x 355 x 304,8 mm, Ø min / max to grind: 2/150 mm, Regulating wheel speed nº: infinite, Min/max speed of regulating wheel (r.p.m.): 10/225 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi TD, Dive (auto/manual): Automatic , Dimensions of the regulating wheel (OD x ID x W): Ø350 x Ø203,2 x 355 mm, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 177.5 mm, Maximum infeed grinding length: 355 mm, Motor power cooling: 0,70 Kw, Coolant system motor power: 0,70 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Voltage: 220/380Kw, Long: 1.165 mm, Width: 3.398 mm, High: 1.700 mm, W ...
1 piece surface grinding machine FS 640 SC with Fagor control Make: Geibel&Hotz Year of Make: 2010 Technical data Working Range: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic plate dimensions 600 x 400 mm - Clamping surface table to spindle centre 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Power grinding spindle motor approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Transverse/vertical speed 100-1000 mm/min Dimensions 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Facilities machine-specific accessories, belt filter system, magnetic separator, extraction Magnetic clamping plate with adhesive force control, automatic dressing incl. compension, Dressing diamond, balancing device, clamping device, 4 grinding wheels
This Schaudt ZX 11 grinding machine was manufactured in 1998. It includes a Knoll VRF 450/2250 system and features transport dimensions of approximately 8 loading metres at a maximum height of 2.2 meters, weighing around 7.5 tons. Accessories include a measuring and positioning system, tailstock, and a special chuck for shaft parts. A great opportunity to buy this Schaudt ZX 11 grinding machine. Contact us for further details regarding this grinding machine.
This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit.
This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information.
This 3-axis Proth PSGS-3060AH surface grinding machine was manufactured in 2008. It offers precision and durability for various grinding applications. Consider the opportunity to buy this Proth PSGS-3060AH surface grinding machine. Contact us for more information.
This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.
maximum number of results exceeded
please refine your search
