gr used for sale

large plastic mill. Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours Delivery by pick-up and disassembly on site

Height=1.32 m, Overall length= 0.8 m, Overall width= 0.55 m, Net weight= 85 kg,

Cup wheel Ø: 180 mm Cup wheel speed: 2900 rpm electr. Connection: 380 V, 2900 rpm, 0.9 kW Vibration table dimensions: 200 x 350 mm Tilting Swinging Table Swing table swivels by +/- 20° Dimensions: 750 x 350 x 1270 mm

Height=1.48 m, Overall length= 1.33 m, Overall width= 0.67 m, Net weight= 355 kg,

HERBOLD KG 45/50, granulator, rotor width 500 mm, n.3 rotating knives x 500 mm., n.2 still knives, 37 kw drive, NEW electric panel, Machine offered totally reconditioned, (photos before overhauling - see how we recondition [HERE](.germanplast/pages/photo-gallery)), installed power - used power in work: about 60-65% : 37, conditions: reconditioned, working width: 500 mm.

Height=1.55 m, Overall length= 1.3 m, Overall width= 1.1 m,

Height=1.68 m, Overall length= 2.27 m, Overall width= 1.48 m, Net weight= 1012 kg,

Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 1282 kg,

Height=0.41 m, Overall length= 0.35 m, Overall width= 0.36 m, Net weight= 37 kg,

Height=0.46 m, Overall length= 0.35 m, Overall width= 0.38 m, Net weight= 35 kg,

Height=1.37 m, Overall length= 0.9 m, Overall width= 0.5 m, Net weight= 100 kg,

Height=1.35 m, Overall length= 0.95 m, Overall width= 0.55 m, Net weight= 85 kg,

Height=1.48 m, Overall length= 1.33 m, Overall width= 0.67 m, Net weight= 355 kg,

Cato PA160 Meat grinder Serial: 327 Stainless, 300L hopper capacity, 160mm diameter throat, 15Kw, comes with various size mincing plates and brand new knives and drive belts, 3Ph

Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulical ...

1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump

grinding width: 32.0 mm max. dia. of grinding wheel: 250 mm grinding wheel size: 250 x 32 x 32 mm turning speeds: 2850 U/min Grain size: K 36 / K 80 engine output: 1.5 kW voltage: 400 V weight: 30.0 kg range L-W-H: 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centerless grinding machine, ROSSI MONZA 400 Grinding wheel width 200mm Grinding wheel diameter 400 pneumatic compensation under power in our warehouse in Gussago BS (Italy) Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylinders, tapered rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, grinding wheels and setting discs have a negative workpiece profile to work which is given to them with the aid of a tool. Centerless through-feed grinding or through-feed grinding and longitudinal grinding: workpieces to be machined proceed continuously with axial feed through the grinding gap., Grinding wheel width: 200, Grinding wheel diameter: 400

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, No. of regulating wheel speeds: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.5 ...

X-travel 420 mm YWeg 270 mm Table size 254 x 482 mm Projection 254 / 318 mm Grinding spindle speeds 12 - 60,000 rpm Spindle stroke 92 mm Spindle speeds 90, 136, 184, 280 rpm Stroke rate, adjustable 2 - 120 strokes at 51 mm Accuracy 1.25 μm at 30 mm Compressed air connection 7 bar Machine weight approx. 1700 kg Dimensions approx. 1.45 x 1.2 x 2.4 m

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 600 kg,

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m Overhauled with geometric KELLENBERGER protocoll. Pictures of a similar 1000mm machine. Standard with: -New electric cabinet -New motor for the workpiecespindlehead -2-axis DRO Fotos of a delivered (1000U) machine with following optiones against extra ch ...

Truck attachment Drum grab Suitable for 2 x 200 L steel corrugated/steel lid drums Description firm grip even on uneven floors Sturdy, welded steel construction Forklift attachment module with robust powder coating in blue (RAL 5010) Fast, easy installation on the forklift Automatic fixation when lifting the drum Automatic release of the clamp when setting down Safe pick-up of steel corrugated and clamping ring drums Height adjustable Specifications Surface: Hot-dip galvanized Application: Lifting/transporting steel drums Width outside [mm] 1050 Depth outside [mm] 1080 Exterior height [mm] 975 Fork pocket spacing [mm] 730 Fork Bags W x H [mm] 150 x 55 Total load capacity [kg] 700 Material: Steel Approval / Certificate Description 1 2006/42 DECLARATION of CONFORMITY Weight [kg] 110 More items - new and used - can be found in our shop! International shipping ...

Process: centerless plunge grinding, max. workpiece diameter: 20mm, max. workpiece length: 80mm, without automation by vibratory bowl. An on-site inspection is possible.

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

Long belt grinding machine Manufacturer: Samco Type: EG Year of Make: 1987 Grinding length: 3,000 mm Incl. spare straps

A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg

Thiel Produro 115 Filing machine - Infinitely variable stroke and speed adjustable - Stroke 40-120mm - Speed 60-300 min - Table swivel 15° - Weight approx. 500kg

1 gebr. Cylindrical grinding machine, Fabr. Cincinnati, Type R 75, Built in 1971 Tip height 130 mm Grinding length 760 mm Spindle bore 38 mm Grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. Max. Grinding spindle can be swivelled twice

gebr. Belt sander, Fabr. Format, Type BS 75 Built in 1999 Grinding width 75 mm with various abrasive belts

Swivel angle 135° Motor 1.1 kW Table height 860 mm Table surface 800×1000 mm Spindle dimensions 28 x 90 mm Spindle speed 1500 rpm with feed unit: Felder S/308, YOC 2011 and accessories

Piovan air blowing station with ELMO-G vacuum pump, Siemens 3 kW electric motor and dust collector with pneumatic valve. In beautiful condition. Please see our other advertisements.

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...

Graver grinding machine Make: Lid Model No.: S0 Built in 1994

CN Centerless grinding machine, ROSSI MONZA 1500 CN, currently being overhauled and fully electrically/electronically retrofitted, Siemens electronics with touchscreen, brushless motor on Z (workpiece diameter) and regulating wheel (adjustable RPM), step motor on grinding wheel dressing increment, auto size compensation after grinding wheel dressing, Grinding wheel 350 mm 610 mm dia, This machine can be inspected in our warehouse in Gussago BS Italy Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is g ...

An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China.

1 gebr. Steel grinding machine, Fabr. Solid, Type DSCD

Double bench grinder, Fabr. Cordes & Sluiter, Type DOT-300 -Motor power 0.85 kW -Speed 1400 rpm -max grinding wheels Ø 300 x 40 mm -Operating voltage 380 volts

Long belt grinding machine TYPE: LZG-M-1 Table size 2500 x 1000 mm with speed control •For grinding, matting and polishing steel Strip speed: 5-30 m/s infinitely electronically adjustable by potentiometer Electromotive, maintenance-free table height adjustment; Adjustment range: 350 mm Working area: 2300 x 1000 mm Belt dimensions: 6800x150 mm Motor power sanding belt: 5.5kW Max. table load: 200 kg Steel table structure with wooden slats; Incl. adjustable workpiece stop Table guide by means of hardened and ground guide shaft Ø 35 mm and 6-way ball bearings on each side Dimensions sanding pad: 320x350 mm Central and clear control panel Single-sided large column projection: 1000x350 mm Incl. workpiece lighting Fold-out extraction hood for better dust extraction- Diameter of drive roller: 0 300 mm- Diameter of suction nozzle: 0 180 mm- Air Velocity: 2 25 m/s-  ...

Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.

weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.6 m, Overall length= 1.3 m, Overall width= 0.8 m, Net weight= 290 kg,

Height=2.95 m, Overall length= 1.5 m, Overall width= 2.76 m, Net weight= 1900 kg,

A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible.

These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive

Granulator Manufacturer: Retsch Type SM 1 The Retsch type SM 100 granulator is a versatile laboratory device designed for the efficient shredding of various materials. This type of grinder is particularly suitable for the preparation of samples in the chemical and pharmaceutical industries, materials research, and the food industry.