gr used for sale

Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg

Distance between centers: 1000 mm, Height of points: 230 mm, Main engine power: 9.2 Kw, Working wheel dimensions (od x id x width): 500x80x203.2mm, Ø max to be rectified: 460 mm, Tailstock cone: MORSE 4, Workpiece head cone: MORSE 5, Max. Z axis travel : 1115 mm, Max. X axis travel: 260 mm, Approximate dimensions (length x width): 440x370 cm, Approximate Weight: 4700 Kg

Morton GL55 Gridlap mixer Stainless, gridlap mixer, variable speed, timer settings, auto tilt discharge, 3Ph

Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel with grooved profile -Outside: Ø 460 mm -Width: 80mm -Receptacle: Ø 203 mm -Total weight: 18.9 kg

Grinding wheels, grinding wheels, cup wheel, double grinding stand, surface grinding wheel -Grinding wheel: grinding wheel -Outside: Ø 495 mm -Width: 30mm -Receptacle: Ø 203 mm -Total weight: 9.2 kg

Pipe gripper, round gripper, laying tongs, round material gripper, scissor gripper, pipe laying device -Manufacturer: Siegert, round material gripper round pliers type RZ -Gripping range: 50 to 250 mm -Load capacity: 250kg -Dimension: 630/250/H450 mm -Town weight: 11 kg

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 34/7 mm -Gratings: Hot-dip galvanized -Quantity: 1x grates available -Weight: 7 kg

Offer 24154 Specifications: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 1.0 / 1.4 kW - Working height 900 mm - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 100 kg

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 800 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 30/9 mm -Gratings: Hot-dip galvanized -Quantity: 4x grids available -Price per piece -Weight: 6kg/piece

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 305 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 13 kg

calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800

Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step -Grating step: 1415 x 335 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized -Quantity: 1 piece available -Weight: 18 kg

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 310 mm -Total height: 70 mm -Struts: wall thickness 3/2 mm -Bridge height: 30/7 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 8,3 kg

CONVEX® Combi-Tower - by UBERT - Made in Germany Two-in-One - The Advantages Combined arrangement for the smallest footprint. This also avoids long distances between sales rooms. Convex double glass doors for perfect product presentation, minimal heat loss and extremely low touch temperatures Intuitive user guidance thanks to plain text display Software update via USB interface Shorter cooking times of less than an hour for grilled chickens with a gross weight of 1kg each Programmable climate control in the cooking chamber for a perfect grilling result The new CONVEX® rotisserie Equipped with 3 heating systems in one device: Infrared for optimal tanning Convection for fast and even cooking Steam for juicier products CONVEX® dampers For the operating modes steam, combination, hot air, regeneration 8 levels (longitudinal insertion) for 1/1 GN ...

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 800 x 270 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 25/10 mm -Gratings: hot-dip galvanized -Number: 1x grids available -Weight: 5 kg

P393 - used approx. 45 m³ / 45.000 L polyester silo, GRP silo, with undercarriage, completely repainted. Technical details: Content: approx. 45 m³ / 45,000 litres Material: Polyester / GRP Silo Manufacturer: Theodor Vanck GmbH Density DIN 1055: max. 1.4 Kn/m³ DIBT: Z-10.2.2-22 Dimensions: approx. Ø 3.00 m × H total 14.00 m / H GRP cylinder 9.00 m Undercarriage measured externally, i.e. incl. steel girder approx. D 2.56 m × W 3.96 m Undercarriage measured inside, i.e. without steel beam approx. D 2.16 m × W 3.46 m × H 3.70 m Other: Silo and undercarriage were repainted by us, see photos. All parts fit on a truck. Used polyester silo, cleaned, in good condition, former salt silo. Standing silo made of GRP, on load-bearing steel structure / undercarriage, dome on top of the roof, several inlets and outlets. Incl. ladder and railing on top of the silo, see photos. Th ...

Spare parts for Herminghausen SR45 centerless cylindrical grinding machine Grinding spindle Replacement flanges for grinding wheel & regulating wheel the spare parts are used and can be offered in ACTUAL condition or overhauled.

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Gratings, grating, light grilles, insert grilles, insert grilles, stair treads, safety steps, grating step, step -Grating step: 800 x 240 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bar height: 25/10 mm -Gratings: hot-dip galvanized -Number: 1x grates available -Weight: 6kg

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 795 x 230 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 30/10 mm -Gratings: hot-dip galvanized -Number: 1x grids available -Weight: 4,8 kg

Up-down sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x Bottom unit 2×5.5kW 2x top chiller 2×5.5kW Sweeping brush top and bottom' 2×0.55kw Adjustable feed on the inverter 4-16m/min Electric grinding height adjustment Ability to work in-line with other machines CE Certified Year of production 2001

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Surface Grinding Machine MONOPRECIS 1DR Travel X: 400 mm Travel Y: 150 mm Maxi grinding height (Z): 220 mm Year of construction: 1983 Manuel Magnetic chuck dimensions: 2500 x 130 mm Max Grinding wheel dimensions: Ø 170 mm Diamond system Manual movement Voltage: 380 V Dimensions (L x W x H): 1300 x 1200 x 1800 mm Weight: approx 800 kg

Surface Grinding Machine JONES and SHIPMAN 540 P Travel X: 483 mm Travel Y: 168 mm Maxi grinding height: Wheel chuck 190 mm / without chuck 240 mm Spindle rotation: 3200 RPM Year of construction: 1996 Magnetic chuck dimensions: 450 x 150 mm Grinding wheel: Ø 200 mm x thickness 25 mm Auto stepover X - Y Manual Z-axis rise Voltage: 380 V Equipped with: 1 Manual Magnetic Chuck BRAILLON PFF Equipped with: 1 Lubricant tank DARENTH type 1004/01 Tank dimensions: L 650 mm x Depth 700 mm x H 900 mm Dimensions (L x W x H): 1500 x 1100 x 1800 mm Weight: approx 1 T

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 17 mm -Mounting: Taper bushing Ø 40 x 30 mm (can be changed) -Dimensions: Ø 187 x 44 mm -Weight: 5.7 kg

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 22 mm -Hole: Ø 42 x 112 mm -Dimensions: Ø 180 x 130 mm -Weight: 8.3 kg

Gebr. Bayer GB-2680N - Industrial bench grinder with drill grinding device - Drill grinding device - Diamond puller - Cooling water pump - Machine light Specification - Grinding wheel Ø: 210 / 280 mm - Grinding wheel width: 40 mm - Speed: 1450 rpm - Motor power: 1.5 kW - Dimensions WxHxD: approx. 1450 x 1600 x 1300 mm - Weight: approx. 300 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 3-groove pulley type SPA 355x3 -V-belt width: 13 mm -Mounting: Taper bushing Ø 48 mm (can be changed) -Dimensions: Ø 360 x 50 mm -Weight: 14 kg

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 13 mm -Hole: cone Ø 101 - 107 mm -Dimensions: Ø 320 x 65 mm -Weight: 15.7 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 8-groove pulley type SPB 224x8 TB 3535 -V-belt width: 17 mm -Mounting: Taper bushing Ø 60 x 90 mm (can be changed) -Dimensions: Ø 230 x 160 mm -Weight: 25 kg

Budde telescopic roller conveyor 5150-12000-600 RA2081 The two telescopic elements of the telescopic conveyor can be manually extended or retracted using a hand crank. Attention! ONLY suitable for truck loading Year of manufacture: 2002 Condition: function-tested, used Optical: Signs of use Base part with double supports: 800 mm height Telescopic elements 2 pieces: manually extendable and retractable Telescopic extension/retraction: hand crank on the operating side Accumulation effect: Accumulation with inclination running upwards Technical data: Stationary part Length: 5150, + 6850 mm Extendable parts Roller width: 600 mm Outer width: 850 mm Height 1 transfer: 800 mm, 1020 with crank handle - Loading e.g. via customer conveyor belt Galvanized rollers diameter 50 mm Roller pitch: 80 mm Operation/crank: front side Self-retaining crank Color: Grey Supports: 2 rigid double supports Base pl ...

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh

We have stored an associated coolant system Knoll type VRF 450/2250 (built in 1997) at a freight forwarder, so it is not on the pictures. The machine is fully functional and is available immediately.

max. width of grinding wheel: 125 mm diameter / bore of grinding wheel: 275 / 300 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 362 A For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 362 A 27 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Holder: Ø75 x 90 mm taper clamping bush 90 x 90 NE (Ø can be changed) -Dimensions: Ø320 x 100 mm -Weight: 32 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Hole: Ø38 x 96 mm -Dimensions: Ø150 x 180 mm -Weight: 6.5 kg

max. width of grinding wheel: 125 mm diameter / bore of grinding wheel: 275 / 300 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 301 S For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 301 S 26 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding drum, deflection drum, belt sander, belt grinder, drum sander -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 340 mm -Record: Ø 77 x 445 mm -Quantity: 5x drum available -Price: per piece -Dimensions: Ø 340 x 640 mm -Weight: 82.0 kg/piece

max. width of grinding wheel: 195 mm diameter / bore of grinding wheel: 75 mm Flange taper: Reishauer Grinding disc flange for machine type Reishauer RZ 400 For mounting ceramic grinding discs for tooth flank grinding - 125 mm wide, dimensions according to machine type Reishauer RZ 400 16 pieces available, price is per piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheels are available, they are still unused and originally packaged in a box. 1x Elbe abrasive media (MICROREX) Shape: 01 Straight Disc 104228/1 400,00x200,00x203,20 58AY 80/2 KL 8 V for: 35 m/s forcibly guided; 30 m/s walk-behind 3x Elbe abrasives (MICROREX) Shape: 01 Straight Disc 104228/2 400,00x140,00x203,20 58AY 80/2KL 8V for: 35 m/s forcibly guided; 30 m/s walk-behind 1x Control disc 140mm. Comet (Elbe) S33728 Shape:01 Straight Disc 250,00x140,00x127,00 A120 R13 8-974-51/18 1x Regulating disc 200mm. Comet (Elbe) S32848 Shape: 01 Straight Disc 250,00x200,00x127,00 A120 R13 6-055-24/18 1x WISSCO dressing tile AP23NAD 1x Lifting crane for grinding media

Fischer 2051 (4051) Leaf blower for three-point attachment Cat. I and II, front or rear attachment. PTO drive 540 1/min. Turbine flow rate up to 300 m³ / min. . More green maintenance technology from A to Z and much more in stock - see sample photos! More objects also under > jodau > Used machines ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

Distance between points: 1000 mm, Point height: 175 mm, grinding length: 500 mm, Ø max to be rectified: 300 mm, inner cone: Morse 5, Working wheel motor power: 7.5 Kw, Longitudinal travel of the carriage (X axis): 267 mm, Transverse travel of the carriage (Z axis): 650 mm, cnc brand: FANUC, cnc model: 16-T

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley type SPB 190x5 -V-belt width: 17 mm -Receptacle: Cone Ø 100 - 107 mm for taper bushing TB 3020 -Quantity: 1x pulley available -Dimensions: Ø 198 x 105 mm -Weight: 9 kg.