gr used for sale

PSU PC 1 NSV 80 (Grundig 9.44904-1705 FD-Nr. 6006 04 100640) Exchangeprice 500,-€ with Exchange 600,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Technical data: with stand, 50 Hz, DAB ED 25% Engine: 3 Capacity: 1.75 A Capacity: 736 W Voltage: 380 V

CPU PC 1 NPP 80 (Grundig 9.44904-1903 FD-Nr. 6006 04 100641) Exchange 710,-€ + Mwst without Exchange 810,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Grinding wheel flange for Kellenberger / Strausak u.-Miwatec grinding machines type 57 U / W in special design. Questions us please at we do extensive accessories for these machine types.

Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Grinding wheel holder for 76 mm bore. More technical info. on request.

Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

Overhauled Gripper Bar for Heidelberg KORD 64 3 Pcs

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

Hopper loaders with separate blower switching box with timer control different capacities available

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

Used line to grind, capacity 300-600kg / h. (depending on the product) The line is equipped with: - Mill REKORD - Cyclone Filter - Centrifugal fan for air transport.

; NEW

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Used semi-automatic batcher granules machine, type DP/3. Production - Italy. New 2005. Stainless steel.

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price: â?¬13 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Spindle speed min: 9,000 Umd.min Max: 15.000 Umd.min Tip height min: 230 mm Max: 510 mm Spindle stroke: 210 mm Horiz. Table large: 700 x 1000 mm Table stroke: 1,800 mm Equipped with: - feed table - feed Hor. Grinding movement - coolant equipment - protection doors table

Work table: 750 x 290 mm, table height: 185 mm band length: 2600 mm strap width: 150 mm abrasive belt rear: 850 x 200 mm grinding unit swiveling: 90°-45° belt speed: 20 m / sec. Additional table: 330 x 330 mm oscillation stroke: 20 mm Oszilationsmotor: 0.25 (0.34 kW) suction connection Ø: 120 mm motor power output S1 100%: 3.0 kW (4,0 PS) motor power S6 40%: 4,5 kW (6.0 HP) voltage: 400 V machine dimensions (W x D x H): 1700 x 700 x 1080 mm weight approx.: 180 kg

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Cast T-slot plate 1500 x 950 mm

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Surface grinding machine

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

used approx. 15 m ³ / 15,000 liter tank of polyester / GRP tank above ground, lying, good condition Dimensions: Ø 2.40 m x approx. 3.80 m long lying tank dome on the top of the tank, multiple connections,-, spouts, etc. The container can be a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rain collection tank, AHL / ASL, etc are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

used approx. 4 m³ / 4000 litres polyester tank / fibreglass tank / transport tank above ground, standing at 4 feet, good condition dimensions: T = 1.80 m x W = 1.30 m x H = 2.40 m (without feet) The tank includes 4 steel feet/cones, dome on the front of the front, several in - and outlets. The container can be used as storage tank for juice, canola oil, water, liquid food, whey, potato steam skins, molasses, liquid manure, AHL, ASL, as rainwater tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site ...

Used approx. 6 m³ / 6,000 litre polyester tank, GRP tank, standing vertically, with flat bottom, above ground - good condition (Staffelstein tank). The tank is in good condition, having stood in the a hall. Dimensions: approx. Ø 2.1 m x 2.70 m high. Standing flat bottomed tank, with multiple connections and spouts, DOM suitable. The container can be used as a storage tank for water, liquid feed, manure, AHL, ASL, whey, potato steam skins, molasses, stillage, seeping juice, canola oil, palm oil, as a rain collection tank, firefighting water tank, water cistern, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. ...

approx. 21 m³ / 21,000 litres used polyester tank / GRP tank, with inner chemical protective coating, good condition. dimensions: Ø 2,50 m x 4.40 m approximately above ground, lying Very thick-walled, with a chemical protective layer from the inside, dome atop the tank body, multiple ports above, newly painted outside. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, canola oil, AHL/ASL, as well as certain chemicals or as rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so tha ...

Used approx. 30 m³ / 30,000 litres polyester tank, fiberglass tank (manufacturer Speidel), very good condition. dimensions: Ø 3.00 m x 4.60 m high aboveground standing flat bottomed tank, dome on the tank body, multiple connections, including V2A / stainless steel filling line. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, canola oil, AHL/ASL or as rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: ...

Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T

Load capacity up to 12,000 kg Grab content from 1 m 3 up to 10 m³ Make: all reputable manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

Load capacity up to 12,500 kg Gripper content of 0.5 m³ up to 5 m³ Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

P109 - used approx. 50 m³ / 50,000 litres polyester silo / GRP-silo, vertically standing, with funnel and support frame 3 x 3 m, in good condition. Twice in stock. volume: approx. 50 m³ / 50,000 litres material: polyester / GRP diameter: approx. Ø 3.00 m height silo: approx. 8.50 m height with support frame: approx. 12.00 m The container can be used as storage silo for water, liquid feed, flour, whey, potato steam skins, salt brine, dried fodder, molasses, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

Load capacity up to 25,000 kg Grab content from 0.5 m² up to 4 m² Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.

used approx. 2 m ³ / 2,000 litres polyester tank, GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 1.66 m 1.10 m = B; H = 1.50 m (without feet). H = (total) 1.75 m Aboveground vertical tank, incl. 4 steel feet/cones, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers  ...

used approx. 2.5 m³ / 2,500 litres polyester tank / GRP tank, transportation tank, Juno-tank, good condition Dimensions: L = 2.25 m; Ø = 1.30 m; H = 1.55 m (including bases) Aboveground, tank, incl. 2 steel bases, dome on the front, several in - and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks ...

Used approx. 3 m³ / 3,000 litres polyester tank / GRP tank, transportation tank, Staffelstein tank, good condition. Dimensions: H = 2, 00 m (tank) H = 2, 50 m (total) W = 1, 00 m L = 1, 60 m (tank) L = 1, 70 m (total) Overground, upright tank, incl. 4 steel feet/ cones, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain drip tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personal ...

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.