gr used for sale

Hard rock slab, granite slab, granite blockHard stone block, angle block precisely machined on all sidesMeasuring cube, measuring plateLength: 1590 mmWidth: 300 mmHeight: 470 mm- 2 holes 80 mm- 2 holes 120 mm- Threaded bushings mainly M16, some with M12 and M18Weight: 570 kgGood condition; used

Hard stone slab, granite slab, granite block, measuring cubeHard stone block, angle block precisely machined on all sidesThe granite slab comes from a measuring machineDimensions of the large table surface L x W x H: 1350 x 1000 x 300 mmDimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of base blocks with leveling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm)- 4 pieces of threaded bushings M16- small chipping on eggs Top edgeOverall dimensions L x W x H: 1350 x 1350 x 300

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...

Favretto MD 300 Universal Surface Grinding Machine CNC Manufacturer [manufacturer]: Favretto Type [ type]: MD 300 Control unit: DTG Plus / Siemens 840D Baujahr[construction year]: 10/2006 Table size: 3,220 mm Grinding travel length: 3,200 x 900 x 725 mm Magnetic table/plate size [magnetic table/plate size ]: 3,000 x 600 mm Longitudinal table speed: 1–40 m/min Cross table speed: 5 m/min Cross locking mechanism speed: 1–50 m/min Maximum load: 4,000 kg (without magnetic plate) Grinding wheel size: 508 x 203.2 x 100 mm Grinding wheel speed: 1,400 rpm Motor power of grinding mandrel: 22 kW Weight of the machine approx.: 17,500 kg Dimensions[machine size]: 9,400 x 3,550 x 3,000 mm Accessories: Magnetic tabletop [magnetic tabletop] coolant press with paper filter various grinding wheels [various grinding wheels] Documentation We will be happy to answer any furt ...

Very good surface grinding machine Table surface / working area 200 x 600 mm

Unused alubit grinding balls (alumina ceramic) designed for wet grinding (continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [1,000 kg]; 1 1/2'' (38 mm) [990 kg]; 2'' (50 mm) [700 kg]; 1 3/4'' (45 mm) [940 kg]; 2 1/2'' (64 mm) [1,970 kg]. All balls made in Italy, packed in 25 kg bags.

Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

In stock on pallet, overall dimensions approx. 1200x800x730 mm Auction-ID: A1-45790-572

KOK Grundel AK motor yacht – well-maintained and fully equipped Year of manufacture: 1979 Length: 9.50 m Width: 3.20 m Draught: 0.80 m Engine & Technology BMC inboard engine with 63 hp Diesel drive 2 diesel tanks each 130 L (total 260 L) 2 driving stations Facilities Convertible tarpaulin (approx. 2 years old) Radio antenna & VHF radio Searchlights & deck lighting Depth sounder (Lowrance) Comfort Galley with 3-burner gas stove Sink Fridge with freezer compartment Hot water boiler Diesel heating (approx. 2.5–5 kW) Saloon with generous storage space WC (chemistry) Water & Tanks Fresh water tanks: 2 x 150 L (total 300 L) Deck & Outside Bathing platform with ladder Anchors, fenders, lock hooks & accessories Extras Harbour trailer included Winter storage in Halle Viewing possible by arrangement Auction-ID: 04 ...

Auction-ID: A7-45983-77

• GROWI wood splitting plant • Type: GAS 850 • Year of construction 2025 • Serial number: 2025048 • Stationary firewood processing plant • Hydraulic splitting drive • Integrated chainsaw unit • Longitudinal conveyor belt / discharge belt • Robust steel construction • Control station with hydraulic control • Emergency stop available • CE version • Suitable for professional firewood operation • High work performance • Stable feet • Well-maintained condition • Ready to use • Ideal for forestry and firewood operations Auction-ID: 04C-FSE-3

JUNG magnetic chuck / magnetic clamping plate for holding steel workpieces during machining, typically on a surface grinder. The set includes an external control unit in a red housing. The chuck is equipped with an EIN / AUS (ON / OFF) switch. The control unit features a viewing window with scale/indicator and an adjustment knob. Complete set, ready for connection. Main features / parameters: • Manufacturer: JUNG • Type: magnetic chuck / magnetic clamping plate for grinder + control unit • Functions: ON / OFF (EIN / AUS), external control unit Auction-ID: A7-46285-13

✨Bauknecht AL 2-1 ✨ Meat Grinder Shop Meat Grinder, Lots of Accessories, 450 W Auction-ID: A7-46327-80

Unaudited Auction-ID: A7-46327-215

HÖCKER POLYTECHNIK Grinding and Extraction Table Weight: approx. 150 kg Working length approx. 2970 mm, working width approx. 1000 mm, Working height approx. 930 mm Total length: approx. 3300mm Auction-ID: A7-46320-9

HBM Drill Sharpener, Drill Grinder From 3 to 13 mm In just three simple steps, you can ensure that blunt, worn drills are extremely sharp again. The grindstone at the drill grinder consists of diamond and is therefore extremely hard. That way you always achieve the desired results quickly. You can be sure of a good result, especially with HSS drills. In this way, this device is perfect for use in industrial workshops. Furthermore, the sharpener is suitable for use on just about any type of drill. So it is a flexible tool.

Technical data: Displacement of the grinding head: .60 mm Axis Shift: .50 mm Total power requirement: 25 kW Grinding pressure: 10-1000 N Grinding wheel diameter: 650 mm

Grinding body dimension: 200 x 40 x 76 mm Circumference speed: 30 m / sec Follow-up value: 0.7 kW Weight: approx. 250 kg Specification: Double grinding bracket with integrated suction

Offer about 40 TRANSPORT Grain wagons TYPE Uagps Pictures can be sent immediately. TECHNICAL DATA Gauge 1435 mm Loading gauge UIC Length between buffers 14840 mm Length of the body 13600 mm Height of the wagon from the rail 4053 mm Wheel base of the wagon 9800 mm Tare of wagon 23.3 t Y25 Bogie type - Y25 Bogie wheel base 1800 m Maximum load 56.7 t Load capacity 80 m3 Brake type - KE-2c-AL-SL Maximum speed 100 km/h Number of discharging gates 3 Aperture of discharging gates 800x770 mm Aperture of loading gates 508x10088 mm All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

The machine is technical and geometrically in a very good state. it was till 2years in use an application and any time inbetrieb are taken. Grter draggable Durchme?er 60 mm the smallest tench-cash Durchme?er 0.5 mm Schleifscheiben-Durchme?er 356 mm Schleifdcheiben width 150 mms control disc-Durchme?er 254 mms control discs width 150 mms Drehzahl-Schleifscheibe 1,780 revo impulse achievement main engine 7 kW speed-control disc 20-250 revos weight 2,900 kg Platzbetarf 8 m²

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

Alpine dairymen curve machine, uses type SR28SL construction year 1994

Shelves galvanized galvanized shelves ground floor shelves galvanized On offer we have new shelves. The details of the offered set: -Number of frames: 6 -Frame height: 2200 mm -Frame depth: 500 mm -Number of subjects: 25 -Tray width: 1000 mm -Specialist load capacity 120 kg -Length of the offered rack 5000 mm Additional information: A large number of the offered goods available - is now available from stock. Other configurations of racks possible. Price for offered shelf 350 On request, we can organize transportation. After entering your postcode we will charge you the delivery charge We offer a professional fitting. German contact: Liliana Howayek 0048601553406 Contact in English: Katarzyna Kujawa 0048606687144

Fabric grinding belts of M3 1260 mm x 13 mm P150 for metalworking

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Machine number: 3728-87 Grinding length 2000 mm (Roll grinding machine)

ASPIRATOR / CLEANING OF GRAIN / 120 T / H CONVECTION 9.2 KW SCREEN DRIVE 3 KW IMMEDIATELY AVAILABLE MOB: + 49 171 5213204

Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.

Roast knuckle or chicken grill BEEREX Type: HD 5 Power: 9 kW Power supply: 400 V / 50 Hz Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

Kellenberger: 1000 U 125 Machine was totally dismantled and rebuilt from the ground up. All sheet metal and aluminum parts are laminated. Work piece headstock newly stored. Completely overhauled hydraulic, All filter replaced.

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Kellenberger Univesalrundschleifmaschine 600 U 125. The machine is in a very good condition, used in addition to several CNC-universal cylindrical grinding machines only for making parts. The term is very low according to the age. Special accessories on request both new as well as offered in the used condition. Machine has a paper band filter. Internal grinding spindles, grinding wheel flanges, clamping device, grinding wheels, etc. on request. If necessary one can be mounted digital display two axes. Display accuracy: o, òó1 and 0.002 mm.

PSU PC 2 NSV 90 (Grundig 9.44904-906 FD-Nr. 6006 04 100664) Exchangeprice 430,-€ with Exchange 530,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

6-color R21454/14 ROTOMEC gravure machine model: Rotopak 1/S web width: max. 820 mm age: overhauled 1984 6 gravure printing units material: 50g/m² - 200 g/m² (paper /PE/ALU/PE) real diameter: max. 800 mm bale width: max. 900 mm gravure printing cylinder: circumference 440 – 800 mm Still in operation: Yes Available: sofort

Belt/ozilierend swiveling Roll in the table

PSU PC 1 NSV 80 (Grundig 9.44904-1705 FD-Nr. 6006 04 100640) Exchangeprice 500,-€ with Exchange 600,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Technical data: with stand, 50 Hz, DAB ED 25% Engine: 3 Capacity: 1.75 A Capacity: 736 W Voltage: 380 V