126,720 used machines on RESALE, but how to find them? Machine Search
Terlet Terlotherm T0-4 Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 32 liter. Number of scraper rows: 4. Inner vessel: 0 / 10 Bar - 0 / 150 °C - 32 liter. Jacket #1: -1 / 4 Bar - 0 / 150 °C - 2,6 liter. Jacket #2: -1 / 4 Bar - 0 / 150 °C - 4,6 liter. Motor: 3 kW - n1: 1.456 rpm - i: 43,33 - n2: 34 rpm - 380/400 V - 50 Hz - 6,60 / 3,85 A. Product inlet: 50 mm. Product outlet: 50 mm. Ground clearance: ± 556 mm. Cy ...
Dough divider and rounder King Grande Rex T3 Year of Make: 2021 Condition: cleaned & tested Extended model of the Basic Rex for processing high dough weights Also suitable for pizza, baguettes and other products 3-row head machine Max. hourly output up to 2160 pieces Stamp size SK 95 Weight range: 135 to 320 g
ID3765 Pallmann PHPH 16-18 (Grizzly) year/Bauahr 1992 Impact hammer mill, 400 kW electric motor, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 Impact hammer mill, electric motor 400 KW, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 pieces
Description with frequency converter and preset counter Machines No. 55661
Description Grieser & Kunzmann Wellendingen mobile, infinitely height-adjustable and rotatable roller table GUK RT-35 built in 1993 – overhauled -Inclined roller ruler for arch alignment -Speed adjustable -Inlet width 350mm -Power supply 220V
Description mobile 2nd folding unit GUK FA 52-4 but there is only 1 folding bag built-in ! Built in 1987 mobile, previously used on endless cutter Böwe 310 – noise protection device – cutting device high-performance cutting system Böwe 310
Description Techno-Grafica Diamand TPP 1550 HS Printing Plate Developing Machine with Two Brush Rollers for Kodak Trillian SP from 2016 with Various Replacement Brushes and Rollers
End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg
End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill -Manufacturer: Greiner, Angle end mill, cylindrical end mill, 2 pieces -Type: W242 Ø60x16xØ22 / Ø48x16xØ22 -Hole: Ø 22 mm -Price/Fee: complete -Transport dimensions: 110/60/H30 mm -Weight: 0.5 kg
General SKU058H374 MakeCMA S.A. Quimper TypeCalibreur Taille 2 No.203 Year of construction1996 LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Width210 mm Specified Features - Sieve granulator Conical granulating sieve(1x) Sieve sizesdia. 210x125mm Sieve perforation1,0mm + 1,5mm + 2,0mm With hoppercheck Inletdia. 210mm Motor5,5 KW, 400 volt (Ex) With variable speed drivecheck MaterialStainless steel 1.4404 (316L) Information Mounted on wheelscheck With switchcheck Floor space2,0x0,9 M Total height1,7 M Weight600 KG ATEX compatiblecheckDiscountSieve granulatorsCMA QuimpeDiscountSieves > Sieve granulatorsBrand > CMA Quimpe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...
General SKU083N397 MakeKek Kemutec TypeBetagrind LocationBarneveld Specified Features - Sieve granulator Material finishPolished inside Main Features MaterialStainless steel Motor7.5 KW Width340 mm Sieve granulators Conical granulating sievecheck Rotor sizesdia. 280x 210 mm Sieve sizesdia 340 x 230 mm Sieve perforation0,5 mm Inlet340 x 130 mm Outletdia. 350 mm Motor± 7,5 KW, 415 Volt MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) Information Mounted on stainl. st. framecheck Floor space1,5 x 0,8 m Total height1,7 m Weight350 kg Extra Specifications- Assembly with Servolift frame. The name of the machine is TK Fielder. Documentation is of Kek DiscountSieve granulatorsKek KemutecDiscountSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...
General SKU030H114 LocationBarneveld MakeVoegele TypePDK 8-12 No.713254 Main Features MaterialStainless steel Motor7.4 KW Width100 mm Specified Features - Sieve granulator Grater(1x) Sieve sizes2x200x100mm With hopper500x320x700mm Motor7,4Kw.380/660Volt MaterialStainless steel Information Year of construction1965 Floor space1,8x0,8M Total height1,9M Weight700 Kg Extra Specifications2 Conveyor/breaking axes Technical specs Extra informationsieve 2x20-0x100 mmDiscountSieve granulatorsVoegeleDiscountSieves > Sieve granulatorsBrand > Voegele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU078Y540 MakeKEK Kemutec Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Width340 mm Specified Features - Sieve granulator Conical granulating sieveCone mill (1x) Sieve sizesdia. 340 x 260 mm Sieve perforationø 3,5 mm Inlet± 175x260mm Outletø 450 mm Motor7,5 kW (415 V, 1450 rpm) Speed2500 rpm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Floor space1,2 x 0,7m Total height1,5 m Weight500 kgDiscountSieve granulatorsKek KemutecDiscountSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU078Y541 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Width340 mm Specified Features - Sieve granulator MaterialStainless steel 1.4301 (304) Conical granulating sieveCone mill (1x) Sieve sizesø 340 x 260mm Sieve perforation1 mm Inlet± 175 x 260 mm Outletø 290 mm Motor7,5 kW (415 V, 1450 rpm) Speed2500 rpm Information MakeKEK Kemutec Year of constructionunknown Mounted on stainl. st. framecheck Floor space1,2 x 0,7 m Total height1,5 m Weight500 kgDiscountSieve granulatorsKek KemutecDiscountSieves > Sieve granulatorsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU042F194 MakeAlexanderwerk TypeR-300 No.040-09775 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor4 KW Width300 mm Specified Features - Sieve granulator Granulating sievecheck Gratercheck Rotor sizesdia. 290 x 170 mm Sieve sizesdia. 300 x 170mm Sieve perforation10 mm Inletdia. 200mm Motor4,0 kW (500 V, 1450 rpm (Ex)) Speed600 rpm MaterialStainless steel 1.4306 (304L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,6 x 0,8 m Total height1,5 m Weight250 kgDiscountSieve granulatorsAlexanderwerkDiscountSieves > Sieve granulatorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...
General SKU006H015 MakeLB Bohle TypePRS-300 No.9604078002 Year of construction1996 LocationBarneveld Main Features MaterialStainless steel Width300 mm Specified Features - Sieve granulator Granulating sieveGrater/shredder (1x) Sieve sizesdia. 300x150mm Sieve perforation± dia. 3mm With hoppercheck Inletdia. 250mm Outletdia. 290mm Motor400 Volt, 16A With variable speed drive(frequency inverter) Speed0-208 Rpm MaterialStainless steel Information Mounted on wheelscheck With switchgearcheck Floor space1,8x1,1 M Total height2,0 M Weight550 KGDiscountSieve granulatorsLB BohleDiscountSieves > Sieve granulatorsBrand > LB Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
General SKU092Z348 LocationBarneveld MakeKEK Kemutec Powder Technology Main Features MaterialStainless steel Width340 mm Specified Features - Sieve granulator Conical granulating sieve(1x) Rotor sizesdia. 310x255mm, Sieve is missing Inletdia. 250mm Outletdia. 250mm Motorcheck With variable speed drivecheck MaterialStainless steel Information TypeBetagrind mill Year of constructionunknown With switchcheck Floor space1,6x1,0 M Total height1,7 M Weight650 Kg Technical specs Extra informationrotor sieve is missingDiscountSieve granulatorsKemutecDiscountSieves > Sieve granulatorsBrand > Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machine ...
General SKU026F097 MakeFrewitt Fribourg LocationBarneveld CEcheck TypeSGV-0013 (dia 120 check 160) Main Features MaterialStainless steel Motor2.2 KW Width120 mm Specified Features - Sieve granulator Granulating sieveSieving, sizing and rasping machine (1x) Sieve sizesdia. 120x160mm, 3 sieves included With hoppercheck Motor2,2 KW, 230/400 Volt (Ex) With variable speed drivecheck Speed± 335-1920 Rpm MaterialStainless steel 1.4404 (316L) Information No.1198122 Year of construction1998 Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,2x1,2 M Total height1,5 M Weight200 KG ATEX compatiblecheck Technical specs Extra information3 sieves includedDiscountSieve granulatorsFrewitt FribourgDiscountSieves > Sieve granulatorsBrand > Frewitt Fribourg What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...
used
- Manufacturer: Tracto - Model: Grundodrill 15XPT T5 TD73 - Year of Manufacture: 2022 - Operating Hours: 915 - Engine: Cummins EU Stage V, 119 kW for travel and drilling - Pulling and Pushing Force: 160 kN - Torque: 6,500 Nm - Drill Rods: TD73, 3 m length each - Undercarriage: Rubber track with support shield - Remote Control: Radio remote control - Cab: Spacious cab with comfort seat, joysticks, and touchscreen panel PC - Drilling Mode: Automatic drilling - Rod Box: Fully galvanised - Rod Changing System: Semi-automatic - Clamping and Release: Semi-automatic - Anchoring System: With bentonite collection tray - Bentonite Pump: High-performance HD pump onboard the carriage - Data Transfer: Drill data recording and transmission - High Pressure Cleaner: Onboard — Measuring Technology DigiTrak Falcon F5+ System with AF8 Display, DigiTrak Sender FT2, V2 15 inch (F2/F5), Lithium battery. ...
Breva Graphics iJet2L Direct Object Printer 15x17 cm For printing on objects, 15x17 cm mono color format UV ink and solvent printer for printing on objects, single color interchangeable. Maximum print height 80 mm, which can be increased up to 300 mm in specific versions. Suitable for printing on paper, plastic, glass, aluminum, wood, leather and imitation leather and countless other applications. Equipped with an HP head integrated into the cartridge, for maximum simplicity of the machine. With computer without software without cartridges Untested equipment
A complete Groninger bottle filling line is available. 1) Bottle unscrambler Groninger ZSB 2000, year of manufacture: 1995. 2) Filling machine Groninger DFV 1000Q, year of manufacture: 2013, filling stations: 10, additional function: transverse transfer system, output: approx. 9000/h, dosing range: 5ml-1000ml, container height range: 30mm-250mm, transport cup dimensions X/Y: 108mm/80mm, operating hours: approx. 24100h. 3) Cap sorter Groninger ZSK 1500, year of manufacture: 1995, sorting disc speed: 25rpm. 4) Capping machine Groninger KVK 106, year of manufacture: 1995, max. capping output: 9000/min, max. container diameter: 100mm, max. container height: 200mm, machine dimensions X/Y/Z: approx. 3400mm/1450mm/2550mm, weight: approx. 1500kg. 5) Discharge conveyor Groninger, year of manufacture: 1995. Documentation available. An on-site inspection is possible.
A Graule notching machine and a Rotox copy milling machine are available. 1) Graule AS 450 notching machine, year of manufacture: 1994, saw blade diameter: 350mm/450mm, bore: 40mm, speed: 2800rpm, max. notching dimensions X/Y/Z: 250mm/110mm/153mm, weight: approx. 400kg. 2) Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.
macchina per acqua e olio - precedentemente utilizzata con acqua funzionamento anche in depressione EV raffreddamento e carico automatico nuove
ESTRUSORE BIVITE PER RIGENERAZIONE VITI DIAMETRO 140 L/D 32 ALIMENTAZIONE FORZATA CARICATORE LATERALE CON SISTEMA DI PESATURA PLC ERGOMEC ANNO 2012 TAGLIO IN TESTA AD ANELLO LIQUIDO FILTECH GRO 1000 VIBROVAGLIO SILOS ALIMENTAZIONE
NASTRO DI TRASPORTO CURVO CON TAPPETO IN MATERIALE PLASTICO INGOMBRI APPROSSIMATIVI: 300X110XH120
LINEA RIGENERAZIONE MONOVITE Diamtero vite 120/210 conico L/D 36 n.1 Degasaggio Silo alimentazione Cambia filtro a piastra Taglio ad anello liquido Vite di scorta
DOWNSTREAM COMPLETO GREINER ANNO PRODUZIONE 2008 BANCO CALIBRAZINE DOPPIO MODELLO get.CAL 11,2– 5P/4Z – DUAL A TRAINO CON TAGLIERINA DOPPIO MODELLO get.COM 30/9-235-S/500 BANCO RACCOLTA PROGFILI DOPPIO MODELLO GTT 6,0
LINEA RIGENERAZIONE MONOVITE Diamtero vite 120/210 conico L/D 36 n.1 Degasaggio Silo alimentazione Cambia filtro a piastra Taglio ad anello liquido Vite di scorta
SISTEMA DI NASTRI E CATENE PER IL TRASPORTO NEL TUNNEL DI LAVAGGIO DI CASSE E PRODOTTO SFUSO DA LAVARE, CASSE PIENE, PRODOTTI DI SCARTO
TUNNEL DI LAVAGGIO IN ACCIAIO PER CASSE E PRODOTTI DIMENSIONI APPROSSIMATIVE CM 595X130X160
DataMatrix station for marking and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation) Output max. 400 objects/min, belt speed 5 - 90 m/min Datamatrix-code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules Several other readable codes, a.o. pharmacode Operation direction from left to right Product take over by alignment belt, consist of lower (length 500 mm) and height adjustable top belt (length 400 mm) Discharge belt length 500 mm Product height max. 100 mm (optional 150 mm), product width 45 - 200 mm, max. product width incl. open flaps 240 mm Bad ejection by blower nozzle with collection container Ejection counter control Central height adjustment for printer and camera Light barrier for product identification (Trigger) 1 LAN PCE camera Mini-smart, plain text/code control ...
DataMatrix station for labelling and verification of folding boxes, cartons and rectangular bottles (serialisation and aggregation). Output max. 400 items/min, belt speed 5 - 90 m/min Data matrix code square 10 x 10 - 144 x 144 modules, rectangular max. 16 x 48 modules Various other readable code types, including Pharmacode Product run from left to right Product transfer by alignment belt, consisting of lower (600 mm long) and height-adjustable upper belt (400 mm long) Ejection belt 300 mm long Product height max. 150 mm, product width 45 - 130 mm Bad product ejection by pneumatic pusher with collecting container Ejection countercheck Central height adjustment for printer and camera Light barrier for product detection (trigger) 1 LAN PCE camera Mini-Smart, plain text/code control 6.217 3 installation positions for camera: front (as-i ...
Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dim ...
CES Group nitrogen freezing tunnel, type: CES-LT-LIN-8mx0.66-PODB, year of construction: 2-12-1998, 380 V, 3 Ph, s/s mesh belt, belt width: 1570 mm, clearance: 1500 mm x 140 mm, total dimensions: 13750 mm x 2300 mm x 1700 mm. Including s/s switch cabinet, dimensions switch cabinet: 2250 mm x 310 mm x 850 mm and Danfoss frequency convertor, dimensions frequency convertor: 250 mm x 200 mm x 500 mm.
CES Group liquid nitrogen freezing tunnel, type: CES-LT-LIN-8mx0.66-PODB, serial number: CES 238, year of construction: December 1998, 400 V, 3 Ph, 9 kW, weight: 3500 kg, plastic mesh belt, belt width: 680 mm, clearance: 640 mm x 50 mm, total dimensions: 5850 mm x 1450 mm x 2880 mm.
Pallets with baker's baskets / transport crates made of plastic in stable professional quality are offered in various sizes and colours. Ideal e.g. for bakeries, warehouses, logistics commercial kitchens, food production, gastronomy and catering. There are a total of 126 pallets with approx. 8000 crates, whereby these are handed over exclusively by pallet. Sizes and prices: 60 x 40 x 16: € 2.50 net per box 5 pallets = 240 pieces = 48 boxes per pallet = € 120 net per pallet 21 pallets = 2,016 pieces = 96 crates per pallet = € 240.00 net per pallet 60 x 40 x 8: € 2.50 net per box 1 pallet = 80 pieces = € 200.00 net per pallet 1 pallet = 50 pieces = € 125.00 net per pallet 80 x 40 x 10: € 2.50 net per box 77 pallets = 4,620 pieces = 60 crates per pallet = € 150.00 net per pallet 1 pallet = 35 pieces = € 87.50 net per pallet 80 x 40 x 15: € 2.50 net ...
weight max. in kg: 1000 kg table length: 1500 mm table width: 1000 mm height over floor: 200 mm stroke height: 200 - 1200 mm stroke: Zeit ca. 15 sek total power requirement: 2.3 kW weight: 330 kg current new price approx. 5.000 euros special price on request Equipment: - Robust electro-hydraulic scissor lift table - for ergonomic working at an optimum working height - with closed platform - stepless lifting and lowering - All-round safety rails - Placement: free-standing on the floor or as a pit installation - remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used
Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used
pressure: 100 t dimensions of the machine ca.: 2 x 1,5 x 2 m strokes per minute: 80 total power requirement: 3 kW weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.35 m, Overall length= 1.84 m, Overall width= 1.49 m, Net weight= 718 kg,
used
Qty. 1 Second-hand Reversing 4-Hi Cold Rolling Mill Mfc.: NKMZ, ABB, Grip Engineering, Launer Engineering Built: 1972 Type: Reversible Cold Rolling Mill (Quarto-1800) The cold rolling stand has been modernized by ABB in 1995. The mill was fitted with automatic gauge control (AGC), flatness control unit (AFC), spot cooling system (by Grip Engineering), and work roll changing device (by Launer Engineering). Besides, the mill has been equipped with a horizontal rolling Oil filtration system (by Launer Engineering). Flatness & AGC control: available /1995
maximum number of results exceeded
please refine your search
9.500 € 
