gr used for sale

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Short taper mount: Ø 106 mm -Bolt circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 30 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 810 mm -Length: 1205 mm -Working height: 820 mm -with supporting ribs -Sheet thickness: 25 mm -Weight: 260 kg

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Proofer Hein GR255-122 Proofer Space for 3 racks or a bread trolley Width 1.22m Height 2m with superstructure 2.3m Depth: 2.55m Manufacturer: HEIN Type: GR255-122 Year of construction: 09-2016 complete with proofing chamber air conditioner

Quick change tool holder, tool holder head, quick change tool holder -Quick change toolholder holder: without tension clamp -Manufacturer: Multifix -Size: D -with mounting for: mounting on the support -Dimensions: 278/250/263 mm -Weight: 33 kg

electric motor, three-phase motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 14 mm -Design: 14 -Protection class: IP 54 -Quantity: 1 available -Dimensions: 245/163/H155 mm -Weight: 5 kg

Key data: 2 mm

Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 330 mm -Taper cone: Ø mm -Thread holder inside: M56 x 5 mm -Through hole: Ø 51 mm -Weight: 23 kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg

Gear motor, electric motor -Speed: 4.2 rpm -Power: 0.1 kW -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Dimensions: 240/155/H130 mm -Weight: 4.7 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm 8x holes -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg

Gear motor, electric motor -Speed: 170 rpm -Power: 0.1 kW -Construction: B3 angle -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Weight: 4.5 kg

Grafoteam PST 360 pressure plate stacker; good condition; cleaned and tested; new plate car; Format 1100x900mm. Plate stacker Grafoteam PST 360; good condition; cleaned and checked; new plate trolley; size 1100x900mm.

Gear motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 23 -Number: 2x motor available -Price: per piece -Dimensions: 395/140/H190 mm -Weight: 11 kg

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

Collet holder, tool holder, tool holder, milling holder, milling tool -Adjustment: SK50 -without adapter sleeves -Manufacturer: WMW -Type: size 25 -Weight: 3 kg

Universal clamping pad -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg

Printing plates transport trolley Grafoteam PST 360 B; Condition New; Format 900x1120mm; mobile; suitable for Grafoteam PST 360 plate stackers. Plate trolley Grafoteam PST 360 B new; condition new; size 900x1120mm; mobile; used for Graoteam PST 3690 plate stacker.

Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h

GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating  Cold foil stamping  Labelshifter  Punching length: 609.6mm  Lattice proofing  manual knife box  Automatic Turret  2 x Spindle

material width: 500 mm material thickness: 0 mm no. of straightening rolls: 9 weight of the machine ca.: 2 t dimensions of the machine ca.: BxTxH 2000x1500x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grafoteam PST 48 pressure plate stacker; good condition; cleaned and tested; Format 811x1200mm; with plate trolley. Plate stacker Grafoteam PST 48; good condition; cleaned and checked; size 811x1200mm; with plate trolley.

Bowl cutter Kramer+Grebe SM 80 Overhauled Technical data overall dimensions 2000x1150x1800 mm; bowl 80 ltr; power supply 400 V, 50 Hz; power: main motor 15/20 kW; bowl motor 1,1/1,4 kW; mixing motor 1,3/1,8 kW; unloader motor 0,75 kW; 2 knives speeds 1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; weight 1500 kg

Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.

Grundfos Water Pump CRN10-02 with Control Pump from 2022, as good as new, complete with control system, 1 available. 0.75 KW, 10 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN10-02 A-FGJ-G-E-HQQE Serial number: 0001 Type: Water Pump with Control Power [kW]: 0.75 Flow rate [m3/h]: 10 Pressure max [bar]: 25 Pumping height [m] 15 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

Grundfos Water Pump CRN3-23 Pump from 2022, as good as new, complete 2 available. 2.2 KW, 3 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN3-23 A-P-G-E-HQQE Serial Number: 0003 / 0004 Type: Water Pump with Control Power [kW]: 2.2 Flow rate [m3/h]: 3 Pressure max [bar]: 25 Pumping height [m] 113 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg

Gear motor, electric motor, three-phase motor -Speeds: 2 rpm -Power: 0.075 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: -Dimensions: 250/140/H120 mm -Weight: 4.5 kg

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -

Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size

Combination with the Intermac CNC Crease Grinder Groove 1500 (no. 23020) - Serial Number: 90147 Weight: 200 kg Power: 0,8 Kw + internal extraction Length mm: 900 Width mm: 1000 Height mm: 1700 Working height: 1200 Transport size L x W x H: 0,9 x 1,0 x 1,7 Number of spindles: 1 spindle Condition machine : Good Control type: Manually Electric. Connection: 16A 3P+N+PE - For more information, please mail us: salestecfort.nl

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 12 collets -Various sizes: 5-25 mm -Drawing in the pictures -Price/Sale: complete -Weight: 2.1 kg

Collet collet sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 6 pieces clamping sleeves -different sizes: 17-25 mm -Drawing with the pictures -Sale: only as a package -Weight: 1.5 kg

Gear motor, electric motor, three-phase motor -Connection: 400/230 volts -Power: 0.45 kW -Rotation speed -Construction: B5 angle -Diameter shaft: Ø 10 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 190/160/H100 mm -Weight: 2.5 kg

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Work table bakery - confectionery table with granite worktop open at the bottom with intermediate shelf Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion

WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inside: Ø 60.3 mm -From: 59.5 to: 61.0 mm -Pressure: 16 bar -Price: per piece -Number: 10x available -Dimensions: 85/95/H78 mm -Weight: 0.6 kg/piece

Stainless steel couplings, pipe coupling -Type: GRIP E W5 -Inner diameter: 114.3 mm -From: 113.0 to: 115.5 mm -Pressure: 16 bar -Price: per piece -Number: 14 available -Dimensions: 160/142/H100 mm -Weight: 1.6 kg/piece

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 60 bar -Liter output: 5.5 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 0.75 kW 1400 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Dimensions: 520/330/H600 mm -Weight: 100 kg

Electrode pliers with air connection for, electrode device, electrode welding device, joint planer, electrode pliers -for: carbon arc process -Cable length: 2.5 m -Dinse connector -Air connection -Number: 2x cables available -Price: per piece -Weight: 4 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

Time relay, safety time relay, safety controller, timer, timer -Manufacturer: Grasslin -Type: Q FRWu -Number: 1x relay available -Price: per piece -Dimensions: 80/70/H65 mm -Weight: 0.19 kg