gma cheese box used for sale

Cavecchi Pulitrice F Cheese cleaning machine Serial: 51 2004, cheese cleaning machine, side and bottom brushes, 3Ph

Finova Portioning & Packaging Line A fully integrated, factory-crated Finova portioning and packaging line designed for precision cheese processing. Built in 2022, this unused system combines cutting-edge technology for cutting, X-ray inspection, weighing, MAP flow pack wrapping, and gas control in a compact, ready-to-deploy format. System Overview Subsystem Manufacturer Description Primary Cutter Finova Cuts 200x600x900 mm or 100x300x500 mm cheese blocks into logs/portions Disassembly & Alignment Finova Converts bars to individual format, aligns for X-ray X-ray & Calibration Finova Inline scanning, volumetric calibration, weight-targeted cut logic Weight Check & Reject Finova Weight verification with automated reject for non-conforming products Portion Cutter Finova Servo-controlled, programmable vertica ...

Used complete production line for yellow cheese, made by TEWES-BIS Poland. New 2019. Production line for yellow cheese, e.g. Gouda, Edam, Dutch type. Daily capacity: Processing up to 180,000 litres of milk per day. TECHNOLOGICAL SPECIFICATION (MAIN MODULES): Section 1: Preparation of cheese milk: o Milk repasteuriser with a capacity of 15 m³/h. Section 2: Preparation of cheese curds: o Cheese boiler with a capacity of 12 m³. o Hot water generator for boilers. o Process water pasteuriser (5 m³/h) with a 10 m³ tank. o Set of process pumps (whey, curd) with a capacity of 25 m³/h each. Section 3: Cheese room – Moulding and pressing: o Curd buffer tank (10 m³) with pump. o Under-mould forming device (UFP) for Dutch cheese. o Complete mould circuit (300x500x100) with cover applicator and remover. o Final pressing system: 144 pressing points. o Tunnel mould washe ...

Horizontal Käde packaging machine

For sale are used KALT cheese vats: Manufacturer: KALT Year of construction: 2001 and 2004 Design: closed, double-O Material: Exterior: Stainless steel (V2A) Inside: Copper Includes control cabinet and Siemens HMI (touch panel)

Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.

Used flowpack by FUJI type FW3700. New 2003. Machine for packing stacks of melted cheese slices into flow-packs. Including reseal-it system type RAD- FF-450, series FF0304-59, year 2003. Machine capacity: - up to 125 packs/minute

Used packaging machine by Roboxis type SP-04. New 2009. Complete Roboxis machine, mixing four different flavours of triangular forms of product, stacked 8 per disc. Technical data: Capacity : up to 25 boxes / minute Box type : 4 different flavours 8/8 boxes, 140 - 250 grams or 3 different flavours 6/6 boxes, 140 - 250 grams Power : 10 kW, 400 V, 50 Hz Dimensions (L x W x H) : +/- 5.00 x 4.00 x 2.80 mtr. Weight : +/- 2,200 kg Compressed air: pressure 8 bar, air consumption 60 m³/h

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

H.Biaugeaud A404 HB Cheese grater Stainless, previously used for grating cheese, two grating attachments, mobile, 3Ph

Auction-ID: A1-41275-195

Used cheese packaging line made by CRYOVAC. New: 2004. The line includes: 1)BL60 bagging machine (CRYOVAC, 2004) TECHNICAL DATA: - Weight: 600 kg - Consumption: Compressed air (pressure 6 bar, 30-40 m3/h) - Electricity: 380V, 50Hz, 3F + ground - Installed power: 1kW - Operating conditions: Bag dimensions: Width: min. 130mm - max. 450mm Length: min. 300mm - max. 650mm - Maximum dimensions of product: Height: min. 40mm - max. 220mm Width: min. 50mm - max. 260mm Length: min. 150mm - max. 425mm Weight: 8 kg Cycles per minute: 20 Number of employees: 1 (employee to change bags, products and general inspection) 2) Vacuum packaging machine VR8610 FUROCAVA (CRYOVAC, 2004) TECHNICAL CHARACTERISTICS: - 4 rotary chambers for continuous flow of products at different speeds - Flow of products of different forms and dimensions, is carried out quickly and without use of s ...

NNP Cheese block cutter Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h,

Stock number: D840, Cheese drainer, stainless steel,, RV. Teknik., Conveyor with drain L 1000 x B 380 mm., Top cylinder driven for pressure, of moulds., Max H 350 mm., Material: Stainless steel AISI 304

Stock number: D747, Cheese washer machine, stainless steel,, B. Christensen,, standing on legs with wheels., Brush width: 350 mm., 0,37 kW motor, beltdrive., Material: Stainless steel AISI 304

Stock number: D567, Cheese washing machine, stainless steel,, APV typr OVO., Brush width 410 mm., Excl. renovation., Material: Stainless steel AISI 304

650 litre, Stock number: T2812, Litre: 650, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Cheese vat, Double jacket: Yes, Agitator: From bridge in the top, Manufacturer: Alfa Laval, Other: Miscellaneous tools

150 litre, Stock number: T2299, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese vat, Standing: In rack with tilt, Double jacket: Yes, Agitator: Yes, Dimensions: Tub: L 550 x W 900 x D 430 mm., Outer dimensions: L 1250 x W 1300 x H 1360 mm., Manufacturer: Paasch Silkeborg, Other: Variable speed, water heater and 35 l. flux vat

Used K2M 550 cheese block divider with receiving buffer from Kazbi. Details: K2M 550 portion cutting device. Output product: cheese blocks Length: approx. 500 mm Width: approx. 300 mm Height: approx. 100 mm. Final product: Division into 5: 300x100x100 mm Division into 3: 500x100x100 mm Division into 6: 250x100x100 mm Edge bands with leftover trimming. Functional description: Cheese blocks are placed manually on a driven inlet belt and pushed onto a ramp. The ramp is placed in a horizontal position and the block is centered by a system of lateral pressures. The ram is automatically moved and the block is cut into the appropriate number of bars towards the long side. After cutting is finished, the ram is withdrawn and the ramp is raised to accept the next block. The cut bars go to the second cutting section. If we need to cut the block or long ribbons crosswise, the  ...

15.000 litre, Stock number: T1579, Cheese vat, stainless steel,, closed, standing on legs., Double jacket., Insulated., Outside fully welded stainless cladding., Double-acting framed agitator from the top., Alfa Laval, Ø 2900 mm., Litre: 15.000, Material: Stainless steel AISI 304

G. Mondini S.p.a. cheese spreader, model: DTT/0-80, serial number: 2096-02/1, year of construction: 09-07-2002, 400 V, 3 Ph, 50 Hz, dimensions: 1580 mm x 1030 mm x 2030 mm.

G. Mondini S.p.a. cheese spreader, model: DTT/LC-80, serial number: 1477/98, year of construction: 20/10/98, 400 V, 3 Ph, 50 Hz, dimensions: 1100 mm x 1800 mm x 2050 mm.

Cooling unit water recooling unit DALEX type DRF 2Masch. No. 38913719 year of construction 1989Volume flow 0.35 m3/hCooling capacity 1950 wattsOperating pressure 2 to 3 barRefrigerant R 134a Device has been converted from R12 to R134aOperating overpressure 18 barPipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litresMains connection 380 volts, 50 HzSpace required L x W x H 900 x 800 x 1020 mmWeight 100 kgGood condition; used

This plant is a small scale Cheese Facility that consists :, SMI Packer, 2 x Vacuum Cheese Packer, Cheese Cutter, Butter Churn 100 litres, Pasteuriser for 1000 litres per hour, Lobe Pump, Cheese Press, Work Tables Stainless steel, Cheese moulds, Cheese Vat with Planetary Cutters, Cheese Tables, Cheese Shelf’s, Fridges, Sale Point Fridges, The plant is sold as seen in good condition, contact us for a quote for this plant .

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 600 kg,

Manufacturer: KALT Year: 1985, overhauled by KALT in 2014 Type: 2-in-1 press (pre-pressing and pressing) Capacity: up to 80 cheeses per batch Format: round, ø 31 cm Including rupture pump Includes all accessories for filling the press Condition: good, fully functional

Used cheese-making kettle with a capacity 5000 liters, manufactured in Finland. Stainless steel.

A mobile cheese brining machine Sugnaux is available. Throughput: approx. 120-150 loaves/h, cheese diameter range: 100mm-200mm. Machine dimensions X/Y/Z: approx. 850mm/1000mm/1350mm, weight: approx. 250kg. The machine was recently overhauled with new couplings, control cables, wheels and frequency converter. Including vacuum cheese holder, second brush set and some spare parts. Documentation vorhanden. A visit on site is possible.

An open copper cheese vat with low material removal and planetary agitator including knife harps and paddles is available. Shape: round, edge material: steel, inner diameter: 2600mm, useful volume: 7000l, outer diameter: 2850mm, height: 2950mm. Cheese mold: 2x4, mold length: 820mm, beam length: 4400mm, whey tub length: 4400mm, total length: 5000mm, width: 1500mm, depth: 900mm. An on-site inspection is possible. The copper was only gently washed.

Used GEA Finnah model 2209.014 cheese production and packaging machine. New: 2000. Maximum capacity: 8x28x60 = 13,440 cph (28-30 staples/min) Capacity: 150 g (120 g, 200 g) Product: cream, homogenised cheese Filling: aseptic Voltage 230/360 V 50 Hz Pressure 8 bar

Used packaging machine for cottage cheese, type: XPG-40. New: 2018 Technical specifications: Capacity: up to 90 packs/min Power: 2.2 kW Dimensions: 3030 x 2700 x 1800 Weight: 1600 kg On an inverter with smooth speed control and a photocell, after a complete overhaul - like new. Almost unused. Packed cottage cheese. No conveyor. Packed.

2.000 litre, Stock number: D244, Litre: 2.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese vat, Standing: On legs, Top: Open, Double jacket: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator placement: In the top from brigde, Other: Cheese sieve

A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

A scarcely used Rühle cooling vacuum tumbler with mixing, marinating and tumbling function is available. Container volume: 400l, max. filling volume: 300l, refrigerant: R404A, refrigerant quantity: 760g, mixer arm speed: 25rpm, polter arm speed: 25rpm, lifting aid load capacity: 300kg. Machine dimensions X/Y/Z: approx. 2100mm/2650mm/2700mm, weight: approx. 1400kg, operating hours: 7540h, mixing hours: 553h. Documentation available. An on-site inspection is possible.

Manufacturer: LEU Type: LK-70-H-120-T Year of Manufacture: 2013 Power Supply: 3 x 400 V AC, 50 Hz Fusing: 16 A, RCD 30 mA time-delayed Certification: CE Find more here - / Contact us at -

Height=1.79 m, Overall length= 1.36 m, Overall width= 0.56 m, Net weight= 292 kg,

Food Tools 5AFCE Cheese cutter Stainless, this ingredient reduction machine uses a wire grid to cut up to 40lb blocks of cheese or butter into smaller portions. Up to 120 products per hour, with a box of spare cutting wire, ideal for dairy facilities and bakeries

Castle box tipping for boxes up to 12001200800

Pure HEBROCK box New machine Auction-ID: A1-45486-2

The scope of delivery includes: 01x Open fronted storage boxes, used Manufacturer: Bito External dimensions: 600 x 400 x 170 mm Interior dimensions: 560 x 360 x 167 mm Opening dimensions: open on one side at the front, 275 x 82 mm (WxH) Handle: yes, single-sided, open Colour: blue Weight | Piece: 1.59 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Clipse TipperTie 1 box 7825 1 box 6250, total 2 boxes

Set Contents: 32x Futura 3 4x Futura 3Z 11x Futura 4 Total weight incl. packaging approx. 60kg Auction-ID: A1-45208-1019

3-axle refrigerated box truck (N3) with tail lift SCANIA R 410 B6X24 NB Construction: Air-conditioned body with air conditioning unit, cooling unit: CARRIER Supra 1150, insulated box body: EMA TI 8.3M Colour: white Total weight: 26,000 kg Emission class: Euro 6 / (EU)627/2014C Power: 302 kW Equipment: 2-seater, automatic, cruise control, Multifunction steering wheel, digital tachograph, Sleeping cabin with one bed, rear view camera system ORLACO, Seat heating, towbar RINGFEDER 4040, Lift axle/trailing axle, foldable tail lift DHOLLANDIA DHSV.20, approx. 2,000 kg, box body with roller door Tyres: 315/80R22.5, 2nd axle twin tyres 2-axle refrigerated box trailer (O4) OMAR 20 first registration: 22.02.2019 VIN: ZA420Z272JFA07954 Type/Variant/Version: 20 / I00P00 / 18622DS000 Construction: Air-conditioned body with air conditioning unit, cooling unit: CARRIER Supra 1150,  ...

3-axle refrigerated box truck (N3) with tail lift SCANIA R 410 B6X24 NB Construction: Air-conditioned body with air conditioning unit, cooling unit: CARRIER Supra 1150, insulated box body: EMA TI 8.3M Colour: white Total weight: 26,000 kg Emission class: Euro 6 / (EU)627/2014C Power: 302 kW Equipment: 2-seater, automatic, cruise control, Multifunction steering wheel, digital tachograph, Sleeping cabin with one bed, rear view camera system ORLACO, Seat heating, towbar RINGFEDER 4040, Lift axle/trailing axle, foldable tail lift DHOLLANDIA DHSV.20, approx. 2,000 kg, box body with roller door Tyres: 315/80R22.5, 2nd axle twin tyres 2-axle refrigerated box trailer (O4) OMAR 20 first registration: 05.04.2019 VIN: ZA420Z272JFA07953 Type/Variant/Version: 20 / I00P00 / 18622DS000 Construction: Air-conditioned body with air conditioning unit, cooling unit: CARRIER Supra 1150, in ...

used box transport Make KHS 18 m straight transporter 240,-€/m 2 pieces 90 curves without drive 450,-€ several drive/deflection stations 650,-€ Various railing brackets with guides

Used and new sea / maritime / transport containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 4 ...

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

Used and new sea containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 41a DE-83395 Freilassin ...