gm used for sale

Winterhalter GM 85 – Advanced Vegetable Washer, Boost your kitchen efficiency with the Winterhalter GM 85, the ultimate solution for professional vegetable cleaning. Designed for restaurants, catering services, and commercial kitchens, this machine ensures hygienic, fast, and energy-efficient washing of all types of vegetables., Key Features:, - High-Capacity Cleaning: Handles large volumes of vegetables quickly, reducing prep time., - Gentle Yet Effective: Removes dirt and residues without damaging delicate produce., - Energy & Water Efficient: Optimized systems minimize water and electricity consumption., - User-Friendly Interface: Intuitive controls make operation simple for all staff., - Durable Construction: Built from high-quality stainless steel for long-lasting performance., - Hygienic Design: Easy to clean, ensuring compliance with food safety standards., Whether you need to p ...

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

East Tyrolean combi mill Waldner GMSM 40 Grindstones 400 mm Output approx.: 25-30 kg fine flour/hour for the production of wholemeal flour and wholemeal meal only DGUV V3 tested by us Connection 400V, 2.2 kW, 16A-CEE plug Used machine

MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230

GMP PROTOPIC 520 MAX SHEET SIZE 520 X 720 MM MAX SPEED 15 M / MIN AUTOMATIC SHEET SEPARTOR MANULA FEEDER OIL TEMPERATURE CONTROLLED LAMINATING ROLLER COMPRESSOR

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: GMN, grinding spindle precision spindle for belt drive -Type: TSAV 140s x 270-6212 L 260980 Overbeck 01340 -Mounting: cone on both sides Ø48/56 mm / thread M40 x 1.5 -Grinding disc holder: Ø 127 mm -Dimensions: see photo sketch -Total dimensions: Ø140 x 450 mm -Weight: 30.3 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: GME, transformer from press brake HACO PPES 30135 -Type: STMU -Technical data: see photo nameplate -Dimensions: 150/100/H235 mm -Weight: 9.6 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist without hand control -Type: GM5 load capacity 1000 kg -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Chain length: 3.5 m -Transport dimensions: 570/390/H330 mm -Weight: 46 kg

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 500 kg -Main stroke: 6 m/min -Fine stroke: 1.5 m/min -Chain length: 3 m -Chassis: Abus -Beam width: max. 260 mm -Dimensions: see photo and technical drawing -Transport dimensions: 520/400/H440 mm -Weight: 41 kg

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Description Angle 180 Band width 400mm Width of curve outside (distance from edge to edge) 187cm

Description Mathias Bäuerle MB Prestige FOLDNet 52-4-FSA-AM 52 fully automatic adjustable four-pocket folding machine 2013 Counter approx. 33.8 million

Key data: 600 mm, 20

The Mahr Primar GMX 600 gear measuring machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of measuring gears, camshafts, rotationally symmetrical components, tools. . Technical data Diameter: 600 mm Module: 20 mm Axial travel: 700 mm Dimensions: 2,300 x 2,400 x 1,800 m Machine weight: approx. 5,000 kg Information and data are non-binding, subject to prior sale Special features: Can be delivered as a used machine or as a retrofit with a new control system based on Siemens and measurement software.

HORIZON GMS 7 -Automatic book spine taping machine Year 1996 -Length of Spine: Manual Feed (80 mm -3.1″ to No Max. Limit) or Automatic Feed (180 mm- 7.1″ to 320 mm -12.5″) -Book Width: Manual Feed (60 mm- 2.4″ to No Max. Limit) or Automatic Feed (128 mm- 5″ to 273 mm- 10.7″) -Taping Thickness: Manual Feed (2 mm- 0.1″ to 30 mm -1.2″) or Automatic Feed (5 mm- 0.2″ to 15 mm- 0.6″) -Taping Speed: 4,000 books/hr. (180 mm/7.1″ long) -Tape Type: Water-moistened adhesive tape -Voltage/Frequency: 100V 50/60Hz, 115-120V 60Hz, 230V 50Hz -Dimensions (W x D x H): 72.1″ x 21.7″ x 36.7″ -Machine Weight: 140 kg (242 lb) -Available immediately in our stock

General SKU256X233 MakeAerzen LocationBarneveld CEcheck TypeGM35S Pressure Pressure buildup1.73 Bar Main Features Capacity25.39 m3/Min Motor55 KW Pressure1.73 Bar Specified Features - Blower Blowercheck Capacity25,39 m³/min Motor55 kW, 400/690 volt, 2975 rpm, (Ex) With air filtercheck With sound absorbercheck Inletcheck Outletcheck MaterialMild steel Information No.4043230 Year of construction2017 Mounted in sound absorbing boxcheck With switchcheck Floorspace1,75x2,20 m Total height2,12 m Weight2525 kg ATEX compatiblecheck Extra SpecificationsMax suction pressure 1,030 bar. max discharge pressure 1,730 bar. buffer vessel, volume 132 l. this machine comes with additional parts and motor New arrivalsBlowersAerzenNew arrivalsBlowers > BlowersBrand > Aerzen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ne ...

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

A conventional center lathe is available. An on-site inspection is possible.

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.

Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.

Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.

A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.

A complete double agitator system 2 x 3000l made of high-quality V2A including propeller agitators made of V2A, continuously variable speed-controlled. Inspection by appointment possible.

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

• Sorting insert diam. 650 mm made of stainless steel • Frequency control unit • Adjusted for cap diam. 28 x h 12 mm • Plastic housing • Height adjustable • Electr. connection 230V/50Hz

• Set up for bottles • Throughfeed with indexing stars for object diam. 24 and 29 mm • Without conveyor belt • Weighing range 2 - 500 g • Capacity max. 200 weighings/min • e=d 0.1 g • Passage from left to right • Paper printer • Bad ejection by pneumatic pusher • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Calibrated until 2014 • Height adjustable • Connection 115/230 V | 50/60 Hz

Continuous checkweigher: • Specially set up for aerosol cans/bottles Ø 23 mm • Belt run from right to left • Load cell SW-D-FS • Passage with cycle star for object Ø 23 mm • Weighing range 0.1 - 500 g • Capacity max. 100 weighings/min • e=d 0.05 g • Paper printer • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Without infeed conveyor up to cycle star and without outfeed conveyor between cycle star and infeed Camera box Coding station: • Receptacle for printhead Domino inkjet printer (without printhead and inkjet printer) • Camera control object bottom • bad ejection camera/weight with blowing nozzles • Connection 115/230V/50/60Hz

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg

Manufacturer: Gildemeister Model: GMX 400 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

Motor 22 KW

Key data: 7200 mm, 4100 mm, 1250 mm

Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device

Key data: 4000 mm, 2700 mm, 1250 mm

Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads

General SKU326S596 MakeGericke TypeGMS 300 LocationBarneveld Main Features MaterialStainless steel Volume240 Ltr. Motor4 KW Specified Features - Powder turbo mixer MaterialStainless steel Powder turbo mixers Paddle mixercheck Powder turbo mixercheck Capacity300 ltr. Useful capacity240 ltr. Trough sizes840x870x470mm Inlet305x310mm Top connectionsdia. 35mm (1x) Inspection hatch400x240mm Outlet300x100mm Glands air purgedcheck Motor4 kW 380 Volt With lump breakercheck Motor2,2 kW 230-240/400-415 Volt Speed lumpbreaker2772 rpm Information No.1005 Year of construction1991 Floorspace1,8x1,2 M Total height1,6 M Weight900 KgCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesOther chemicalStarchPowder turbo mixersTea, herbs & coffeeGeneric medic ...

length: 1980 mm width: 670 mm height over floor: 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: 115 und 82 mm Cutting height: 55 mm Motor output: 2.0 kW machine weight ab.: 45 kg KS crosscut saw for cutting (glass) strips with manual and electronic length stop Suitable for wood, PVC, aluminum ----------------------------------------------- Brief manufacturers description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----------------------------------------------- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°), 82 mm (at 45°) Max. cutting height: 55 ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

A stainless steel pressure tank housed in a shipping container, fitted with various equipment for dispensing drinks., Additional title: Stainless steel pressure tank housed in a shipping container, Capacity: 3200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 4,65 m, Width: 2,3 m, Height: 1,95 m, Weight: 2500 kg, Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Beer transport tank in a shipping container, with CIP spray head and manhole. Includes a metering system (max. flow rate: 120 l/min)., Additional title: Stainless steel pressure tank housed in a container, Capacity: 7200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 7,25 m, Width: 2,4 m, Height: 2 m, Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

General SKU001M033 LocationBarneveld MakeDietrich Reimelt TypeGMA 10,0 Pressure Pressure buildup0.3 Bar Main Features Capacity1 m3/Min Motor3 KW Pressure0.3 Bar Specified Features - Blower Blowercheck Capacity60 m³/h Motor3 kW(380V, 1400 rpm) With air filtercheck With sound absorbercheck Inletø 150 mm Outletø 200 mm MaterialMild steel Information No.316484 Year of construction1989 Mounted in sound absorbing boxcheck Floorspace0,8 x1,2 m Total height0,8 m Weight500 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalRubberAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsTea, herbs &  ...

GMC C2500 High Sierra 25 – Built in 1975 • Model: GMC C2500 High Sierra 25 • Registration date: 31.12.1975 • Engine: 7.4 liter V8 big block gasoline • Standard power: 180 kW / 245 hp • Power output after conversion: 257 kW / approx. 350 hp • Automatic transmission • Rear-wheel drive • H license plate (classic car registration) • Vehicle Type: Truck Open Box • High Sierra Amenities • Engine, drive & electrics overhauled (2022) • Stainless steel exhaust system • Tyres: 33×12.5 R16.5 LT • Towing capacity: approx. 2,700 kg • Distinctive US pickup of the C/K series (3/4-ton) • Classic American V8 sound • Collector's vehicle with value appreciation potential Auction-ID: A1-47155-6037

Power: 700W, Auction-ID: A1-46397-9

Auction-ID: A3-43538-11807

Auction-ID: A1-47154-472

Auction-ID: A1-47154-2901

Lot of 2 PULS SL40.300 industrial power supplies. Input: 3AC 400–500V, 50–60Hz, 3A/phase. Output: DC 24–28V / 40A, continuous power 960W, peak power 1080W.

Mixed lot of JUMO industrial automation and temperature/process control equipment including approx. 11x diraTRON 104 controllers, , 2x ITRON 04 display/controllers, 1xcTRON 04, 1xdTRON 308 and 1x LOGOSCREEN 500 cf paperless recorder.