gm used for sale

CONTROLS   PLC SIEMENS S7 PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 315 to   nominal work capacity: 38 kNm PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1200 mm   thickness of bolster plate: 200 mm SLIDE   slide force: 315 to   table surface (left-right): 1995 mm   table surface (front-back): 1100 mm   stroke: 160 mm   stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS)   slide adjustment: 140 mm   stroke rate (min.): 20 /min   stroke rate (max.): 80 /min   main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 555 mm   distance between columns (H-frame): 2060 mm   passline opening (free passag ...

Manufacturer: Aerzener Model: GM7L Year of Manufacture: 2019 Type of Machine : Positive Displacement Blower Max. Suction Pressure (abs): 1.013 bar Max. Discharge Pressure (abs): 1.413 bar Nominal Motor Power: 7.50 kW Unit Weight: 294 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

ABUS-Einträger-Laufkatze Typ GM3100 / ABUS single-girder trolley type GM3100 Load capacity: 10 t Hakenweg / Lifting height: 10 m Reeving: 4 / 1 Lifting speed/lifting speeds: 0.66/4 m/min Zwei Fahrmotoren / Two travel motors Linear actuator and the contactor box damaged Einsatz auf Ein-Träger-Laufkran Typ ABUS ELK / Use on single-girder overhead traveling crane type ABUS ELK Price ex works, loaded Please do not hesitate to contact us for further information.

Manufacturer: Aerzener Model: GM60S Year of Manufacture: 2017 Type of Machine : Positive Displacement Blower Suction Pressure (max., abs.): 1.013 bar Discharge Pressure (max., abs.): 2.013 bar Nominal Motor Power: 132.00 kW Unit Weight: 2548 kg Certifications: CE, EAC Find more here - .ucymachines/ Contact us at - sales@ucymachines

Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;

A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible.

An insulated process vessel is available. Temperature min./max.: -10°C/143°C, volume: 2491L, operating pressure range: -1bar/3bar, test pressure: 5.6bar. An on-site inspection is possible.

General SKU282X371 MakeAerzen LocationBarneveld TypeGM60S Pressure Pressure buildup1 Bar Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56.22 m3/min Motor90 kW, 1495 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm MaterialMild steel General No.1623071 Year of construction2019/1998 Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2019, 120,10 kW, 3000 rpm.air buffer, 1998, volume 180 ltr, work pressure 1,1 bar, temperature 150°CFine chemicalsStarchBlowersOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feed ...

Key data: 640 mm, 1500 mm

Turning/milling center GILDEMEISTER GMX 400 linear Year of Make: 2003 Control: Sinumerik Power line Technical data: Drive power main spindle ISM 90: 36/45 KW (100/40%) Main spindle speed: Torque main spindle: Bar Passage: 90mm Number of magazine slots: 120 pcs. Tool holder milling spindle: HSK 63 Drive power counter spindle ISM 90: 36/45KW (100/40%) Speed of sub-spindle: Torque sub-spindle: Bar Passage: 90mm B-axis / milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed Driven Tools: Number of turret slots: 12 pcs. Tool holder: VDI 40 Accessories: - Chip conveyors - High-pressure system with 20bar - Preparation of 3D probes - Tailstock function counter spindle - Automatic sliding doors

General SKU282X373 MakeAerzen LocationBarneveld TypeGM60S Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56.22 m3/min Motor120 kW, 1485 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm General No.1615165 Year of construction2019/1998 Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2019, 120,10 kW, 3000 rpm,&:nbsp: air buffer, 1997, volume 180 ltr, work pressure 1,1 bar, temperature 150°CFine chemicalsStarchBlowersOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBe ...

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.

General SKU256N198 MakeGMF GOUDA LocationBarneveld CEcheck TypeDisc Pastillator DP20/2 Main Features MaterialStainless steel/Coated Specified Features - Belt cooler Cooling beltø 2000 mm rotating discs (2x) With motor1,5 kW Belt can be cooledcheck Feeding drop dosing devicecheck With scrapercheck Outletø 150 mm MaterialStainless steel General No.DP 47-2-1 Year of construction1997 With switchcheck Floorspace6,6 x 3,3 m Total height3,3 m Weight6000 kgRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesSugarMinerals & inorganicPowdered foodsBelt coolersOils & fatGMF GoudaIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Food & Feed > SpicesIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Cos ...

turning diameter: 640 mm turning length: 1.185 mm control: SINUMERIK 840D swing diameter: 640 mm distance of spindle heads: 1500 mm slide I:: X1 / Y1 / Z1 / B slide travel X-axis: 550 mm slide travel Z-axis: 180 mm Z- Travel: 1.185 mm B - axis: 240 ° feed x-axis: 0 - 40.000 mm/min feed y- axis: 1 - 24.000 mm/min Feed z- axis: 1 - 70.000 mm/min feed B-axis: 1 - 20 1/min rapid traverse X/Y/Z: 40 / 24 / 70 m/min feed capacity X/Y/Z: S6: 7,00/11,00/7,50 kN tool taper: HSK 63 turning speed milling-spindle: 10 - 12.000 1/min power capacity at 100 % load: 13,20 kW power capacity at 40 % load: 22,00 kW torque milling spindle: 60 / 100 Nm tool magazin:: no. of workpieces in the magazine: 46 Stück tool length - max.: 350 / 200 mm tool diameter: 80 mm wotkpiece diameter with 2 vacant positions: 120 mm weight of tools max.: 6 / 10 kg slide II:: X2 / Z2 slide travel X-axis: 180 mm Z- Travel: 1.050 ...

Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description: A line consisting of: Freezer tunnel TVI CBF 1000. SCHIESSL tunnel feed unit with Bitzer compressor. TVI GMS 500 slicer.

Winterhalter GM 85 – Advanced Vegetable Washer, Boost your kitchen efficiency with the Winterhalter GM 85, the ultimate solution for professional vegetable cleaning. Designed for restaurants, catering services, and commercial kitchens, this machine ensures hygienic, fast, and energy-efficient washing of all types of vegetables., Key Features:, - High-Capacity Cleaning: Handles large volumes of vegetables quickly, reducing prep time., - Gentle Yet Effective: Removes dirt and residues without damaging delicate produce., - Energy & Water Efficient: Optimized systems minimize water and electricity consumption., - User-Friendly Interface: Intuitive controls make operation simple for all staff., - Durable Construction: Built from high-quality stainless steel for long-lasting performance., - Hygienic Design: Easy to clean, ensuring compliance with food safety standards., Whether you need to p ...

This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information.

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible.

machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: GMN, grinding spindle precision spindle for belt drive -Type: TSAV 140s x 270-6212 L 260980 Overbeck 01340 -Mounting: cone on both sides Ø48/56 mm / thread M40 x 1.5 -Grinding disc holder: Ø 127 mm -Dimensions: see photo sketch -Total dimensions: Ø140 x 450 mm -Weight: 30.3 kg

Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.

General SKU282X374 MakeAerzen LocationBarneveld TypeGM60S Pressure Pressure buildup1 Bar Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56.22 M3/min Motor90 kW, 1485 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm General No.1671044 Year of construction2022/1997 Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2022, 120,10 kW, 3000 rpm,&:nbsp: air buffer, 1997, volume 180 ltr, work pressure 1,1 bar, temperature 150°CFine chemicalsStarchBlowersOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedCo ...

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: GME, transformer from press brake HACO PPES 30135 -Type: STMU -Technical data: see photo nameplate -Dimensions: 150/100/H235 mm -Weight: 9.6 kg

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg

General SKU282X372 MakeAerzen LocationBarneveld TypeGM60S Pressure Pressure buildup1 Bar Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56,22 m3/min Motor90 kW, 1485 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm General No.1585266 Year of construction2017/1997 Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2017, 120,10 kW, 3000 rpm,&:nbsp: air buffer, 1997, volume 180 ltr, work pressure 1,1 bar, temperature 150°CFine chemicalsStarchBlowersOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedCo ...

Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg

General SKU282X375 MakeAerzen LocationBarneveld TypeGM60S Pressure Pressure buildup1 Bar Main Features Capacity56.22 m3/Min Motor90 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity56.22 m3/h Motor90 kW, 1485 rpm, 400/690 volt With air filtercheck With sound absorbercheck OutletDia. 200 mm General No.1631094 Year of construction2020/1998 Mounted in sound absorbing boxcheck Floorspace1,65x2,20 m Total height2,60 m Weight3600 kg Extra SpecificationsBlower head, 2020, 120,10 kW, 3000 rpm,&:nbsp: air buffer, 1998, volume 180 ltr, work pressure 1,1 bar, temperature 150°CFine chemicalsStarchBlowersOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConf ...

Drilling machine, column drilling machine, pillar drilling machine, pillar drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear -with two-spindle drilling head Manufacturer Sigloch Schrieder Type: V602 -Drive power: 1.02/0.88 kW -Drill distance adjustable: 18-110 mm -Max. Drill: 2x Ø 6 mm -Table size: 275 mm -Spindle mount: MK3 -Projection: 220 mm -Speeds: 100-2900 rpm -Columns: Ø 100 mm -Spindle stroke: 75 mm -Transmission -Dimensions: 900/400/H1910 mm -Weight: 230kg

Description Angle 180 Band width 400mm Width of curve outside (distance from edge to edge) 187cm

General SKU320S562 MakeAerzen LocationBarneveld TypeGM 7 L Pressure Pressure buildup1 Bar Main Features Capacity6.9 m3/Min Motor7.5 KW Pressure1 Bar Specified Features - Blower Blowercheck Capacity6,9 m3/min Motor7.5 kW 400/690 Volt With air filtercheck Inlet390x55mm Outletdia. 150mm MaterialMild steel General No.703955 Year of construction1994 Mounted in sound absorbing boxcheck Floorspace1,4x0,8 M Total height1,1 M Weight380 KgFine chemicalsStarchBlowersOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicTea, herbs & coffeeOintmentsGeneric medicinesPow ...

Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

A conventional center lathe is available. An on-site inspection is possible.

HORIZON GMS 7 -Automatic book spine taping machine Year 1996 -Length of Spine: Manual Feed (80 mm -3.1″ to No Max. Limit) or Automatic Feed (180 mm- 7.1″ to 320 mm -12.5″) -Book Width: Manual Feed (60 mm- 2.4″ to No Max. Limit) or Automatic Feed (128 mm- 5″ to 273 mm- 10.7″) -Taping Thickness: Manual Feed (2 mm- 0.1″ to 30 mm -1.2″) or Automatic Feed (5 mm- 0.2″ to 15 mm- 0.6″) -Taping Speed: 4,000 books/hr. (180 mm/7.1″ long) -Tape Type: Water-moistened adhesive tape -Voltage/Frequency: 100V 50/60Hz, 115-120V 60Hz, 230V 50Hz -Dimensions (W x D x H): 72.1″ x 21.7″ x 36.7″ -Machine Weight: 140 kg (242 lb) -Available immediately in our stock

Weighing range min.: 175g, temperature range: 10-40°C, voltage: 230V, frequency: 50Hz, with EC declaration of conformity. An on-site inspection is possible, not under power.

Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible.

Size: 450 x 460 mm Equipments: Hoist duplex tires Lifting height 225 cm Weight 18700 KG Diesel 6 Cylinder Deutz Motor Stacker length 360 cm width 200 cm installation height 240 cm Fork length 250 cm width 30 cm

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg

Manufacturer: Gildemeister Model: GMX 300 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

Key data: 7200 mm, 4100 mm, 1250 mm

Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device

Key data: 4000 mm, 2700 mm, 1250 mm

Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads

Kistler NC joining module with double station/spindle unit Kistler NCFH 60 servo press with feed carriage & spindle station The Kistler NCFH 60 NC joining module is integrated into an industrial double station/spindle unit for automated series production (e.g. friction welding or precision pressing). The system is characterized by the highest precision, integrated force-displacement monitoring (piezoelectric sensors) and an extremely robust design for continuous industrial loads. Precise press-fitting and joining: Ideal for high-precision assembly processes in the automotive industry, electrical manufacturing or general mechanical engineering. Integrated quality assurance (force-displacement monitoring): Thanks to the built-in piezoelectric sensors, the module measures the exact tensile and compressive forces during the pressing process depending on the position.  ...

General SKU001M033 MakeDietrich Reimelt LocationBarneveld TypeGMA 10,0 Pressure Pressure buildup0.3 Bar Main Features Capacity1 m3/Min Motor3 KW Pressure0.3 Bar Specified Features - Blower Blowercheck Capacity60 m³/h Motor3 kW(380V, 1400 rpm) With air filtercheck With sound absorbercheck Inletø 150 mm Outletø 200 mm MaterialMild steel General No.316484 Year of construction1989 Mounted in sound absorbing boxcheck Floorspace0,8 x1,2 m Total height0,8 m Weight500 kgFine chemicalsStarchBlowersOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicTea, herbs ...

GMP Surelam-Pro 500D Roll Laminator - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl GMP Surelam-Pro 500D Roll Laminator Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines GMP Surelam-Pro 500D Roll Laminator Price: 1375 EUR Download PDF GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to  ...

This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details.